Pumper 5 - Study guides, Class notes & Summaries

Driver/Pumper OperatorCoefficient for 1 3/4" with 1 1/2" couplings - correct answer 15.5 Coefficient for 2" - correct answer 8 Coefficient for 2 1/2" - correct answer 2 Coefficient for 3" with 2 1/2" couplings - correct answer .8 Coefficient for 3" with 3" couplings - correct answer .677 Coefficient for 4" - correct answer .2 Coefficient for 5" - correct answer .08 FL - correct answer Friction Loss in PSI C - correct answer Friction Loss coefficient Q - corre...

TEEX Final Questions With Revised Correct Detailed Answers Guaranteed Pass 1. What type of gloves should be warn when replacing a hot bulb? A Latex B cotton C Leather D Synthetic - ANSWER Leather 2. When should the spark plug on a electric generator be replaced? A When it is damaged B After three months of use C During routine maintenance D After five to eight months of use - ANSWER when it is damaged 3. What equipment is necessary for service testing? A...

The real breakthrough for today's modern fire apparatus came with the introduction of the ___________, which carried a booster tank, had a pump capacity of 250 gallons per minute or greater, and carried 2 1/2-inch and 1 1/2 inch houses used for water supply and firefighting A. Triple-combination pumper B. Articulated boom C. Tower Ladder D. Quad pumper -:- A Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be ...

1. Fire protection engineers have established PSI as a minimum re- quired residual pressure when computing the available water for flow test results. ANS 20psi 2. The most common gallonage rating for horizontal shaft pumps in use today are - GPM. ANS 500 - 1500 gpm 3. A fire pump serving a standpipe system should be tested ANS weekly 4. A fire department pumper can effectively supply around feet in a high rise building depending on hydrant pressure and other factors. ANS 450 feet 5. Cla...

Pumper CDC Questions and Answers Fully Solved A fire apparatus should be started with all electrical switches in the OFF position in order to: Start the engine without a load. During an inspection of your fire apparatus, you should ensure that the foam level is: Full Match the location of each fire apparatus inspection item to the name that applies saddle tanks - 6 winch - 7 main hose bed - 2 automatic snow chains - 4 intake strainers - 5 ladders - 3 compartments - 1 ...

IFSTA, Essentials of Firefighting: Chapter 13Supply hose - correct answer transports water or other agents from a hydrant or other source to a pumper Attack hose - correct answer Transports water or other agents at increased pressure from a pumper to nozzle(s) or FDC Fire Department Connection - correct answer FDC, Connection point into sprinkler or standpipe system to boost water flow, connection has clappered siamese 2+ 2.5 in intakes or 1 large 4 in intake Booster hose - correct answ...

PUMPER EOC QUESTIONS AND ANSWERS 100% SOLVED The benefit of an apparatus-mounted generator on a fire apparatus is that it can provide 50 kilowatts, whereas a portable generator can only produce: ️️5 kilowatts All of the following are rescue tools EXCEPT ️️drills Identify TWO items that should be included on daily fire apparatus ️️-Tire Condition -Coolant levels On the vacuum services test, the system vacuum and pump priming device should achieve a column of mercury of at ...