Socket wrench - Study guides, Class notes & Summaries

NCCER MILLWRIGHT PRACTICE EXAM 2 LATEST 2023 WITH COMPLETE SOLUTION @STUVATE- STUVIA On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - aluminum oxide A blotter is used on a grinding wheel to: - protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at l...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 socket wrenches round metal sleeve with a square opening in one end for insertion of a handle -for tightening or loosening a nut or bolt -available in 6- and -12 point openings socket handles provides the means to turn the socket using many different types of handles ratchet used for speed and convenience in places where a full turn cannot be made hinge handle longest and strongest socket ...

NCCER Hand Tools Exam 100% Passed Adjustable Wrench - Answer ️️ -A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Often referred to as a Crescent wrench due to brand recognition Ball-peen hammer - Answer ️️ -A hammer with a flat face that is used to strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal. Bevel - Answer ️️ -The inclination of a surface that intersects another surface at any angle less than 90...

Industrial Maintenance and Mechatronics CH-4-5 Tools and Fasteners 100% Correct SAE Society of Automotive Engineers metric system The decimal measuring system based on the meter, liter, and gram as units of length, capacity, and weight or mass. wrenches used to tighten or loosen nuts and bolts. Sockets used to tighten or loosen nuts and bolts, comes in various size and a ratcheting handle. ratchet A device consisting of a bar or wheel with a set of angled teeth in which a pawl...

©BRAINBARTER 2024/2025 Pipefitter NCCER Test Exam Questions With 100% Verified Answers. Convert 1/4 to its decimal equivalent. A) .01 B) .25 C) 0.4 D) 0.5 - answerB Piping that is field-routed to a pump must be supported A) Off the pump suction B) Diagonally C) Independently D) Off the pump discharge - answerC What is used when lighting a cutting torch ? A) Striker B) Cigarette lighter C) Match D) Any open flame - answerA Where is specific information needed to install piping ...

NCCER Hand Tools Exam 100% Passed Adjustable Wrench - Answer ️️ -A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Often referred to as a Crescent wrench due to brand recognition Ball-peen hammer - Answer ️️ -A hammer with a flat face that is used to strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal. Bevel - Answer ️️ -The inclination of a surface that intersects another surface at any angle less than 90...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Adjustable end wrench A smooth-jawed adjustable wrench used for turning nuts, bolts, and pipe fittings. Often referred to as a Crescent® wrench. Ball peen hammer A hammer with a flat face that is used to strike cold chisels and punches. The rounded end—the peen—is used to bend and shape soft metal. Bell-faced hammer A claw hammer with a slightly rounded, or convex, face. Bevel To cut on a sl...

When using an air impact wrench, be sure to use an extra thick socket, called an ___ socket. - Answer Impact Rubber tipped ___ work at. Air pressure dash work at a shop air pressure - Answer Blow guns Position - - - - as close to the grinding wheel as possible - Answer Res

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Carpenter's tool used to drive and pull nails. Claw hammer A common tool with a rubber head designed to protect the surface being struck. Rubber hammer A tool used to put in slotted screws. Flat or Slotted head screwdriver A tool used to put in cross-head screws. Phillips head screwdriver This screwdriver has a star-shaped tip that is useful for replacing such parts as tailgate lenses;it is...

Adjustable Wrench - A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Ball-peen Hammer - A hammer with a flat face that is used to strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal. Bell-faced Hammer - A claw hammer with a slightly rounded, or convex, face. Bevel - To cut on a slant at an angle that is not a right angle. Box-end Wrench - A wrench, usually double-ended, that has a closed socket that fits over the head...