Struck by hazards osha 10 Study guides, Class notes & Summaries

Caught-In or -Between Hazards (OSHA- 10) Questions and Answers Already Passed Which of the following answer options are ways employers protect workers in trenches from equipment and materials? -Keep heavy equipment away from the edge of a trench. -Use a warning system when workers use mobile equipment next to or near the edge of an excavation. -Grade away from excavation, when possible. -Prevent the use of cranes directly over the top of a trench with workers present below. -Keep ex...

What causes 90% of all construction injuries and deaths and are used to help OSHA inspectors improve their effectiveness? correct answers Focus Hazards What is the minimum safe working distance for overhead power lines? correct answers 10 feet What is the standard procedure used to safely de-energize equipment on circuits before they are worked on? correct answers Lockout/Tagout Which of the following is not true about Material Safety Data Sheets? correct answers They can be written in ...

OSHA 30 Final - Andy's IBEW JATC class Exam Questions and Answers General Duty Clause (OSHA) - Answer-states that an employer has an overall obligation to furnish employees with a place of employment free from recognized hazards OSHA top priority inspection? - Answer-Imminent Danger - to prevent death or serious physical harm from occurring. Highest proposed fine, and what type is it? - Answer-Willful violation - $129,336 Who is cited by OSHA? - Answer-Employers/companies What is the u...

The creation of OSHA provided this important right to workers: - The right to a safe and healthful workplace. What type of OSHA inspection is conducted when immediate death or serious harm is likely? - Imminent danger. OSHA requires that employers pay for most required personal protective equipment (PPE), including: - Hard hats. During an OSHA inspection: - You have the right to talk to the inspector privately. When an employer receives an OSHA citation, it must be: - Posted for 3 da...

OSHA 500 Construction Trainer Exam with Correct Solutions 3 major types of rigging hazards - Answer -falls struck by electric materials handling aparatus in rigging (3) - Answer -wire ropes chains synthetic (web) slings inspections (how often and by whom) - Answer -prior to each use by a competent person rigging restrictions for wire rope - Answer -less than 10% broken wires in 8 diameter requirements for special custom-designed accessories in relation to safe working loads for rigging...

OSHA 10 Final Review Questions And answers. Graded A+. 100% Approved Pass Rate 1. Approximately 75 percent of struck-by fatalities involve: - Ans-Heavy equipment, such as trucks or cranes (Your Answer) 1. Before the start of each work shift, it is mandatory that: - Ans-A competent person inspects the scaffold before the start of each work shift (Your Answer) 1. In the case of materials handling, storage, use and disposal, remember that the main hazards are injuries from: - Ans-Impro...

What is OSHA's mission? - To protect the safety and health of America's workers What can be a result of a workplace injury or illness? - Lower morale and increased costs When does a horizontal standard apply? - When a condition does not apply to a specific industry or type of equipment What is section 11(c) of the OSH Act? - The right of workers to seek safety and health on the job without fear of punishment OSHA requires that employers certify that abatement is complete of each cited vi...

A blaster is: - A competent person who uses explosives A ground-fault circuit interrupter (GFCI) protects workers from shock by: - Matching the amount of current going into an electrical device against the amount returning from the device and shutting down power if a ground fault is detected A noise level of 95 dB is ______ than the lowest level at which hearing protection is required (85 dB), and your exposure should be limited to six hours or less. - Ten times louder than A scaffold must...

OSHA 10 Test Questions with Correct Answers struck by injuries are produced by forcible contact or impact between the injured person and a/n...? - Answer-object or piece of equipment the following examples of struck-by hazards. which one is an example of a struck-by flying hazard? - Answer-hit by a load dropped from a crane. As a load is mechanically lifted, the materials...? - Answer-may strike workers if the load swings, twists or turns Among the list of ways workers can protect ...

OSHA 30 Final - Andy's IBEW JATC class Exam Questions and Answers General Duty Clause (OSHA) - Answer-states that an employer has an overall obligation to furnish employees with a place of employment free from recognized hazards OSHA top priority inspection? - Answer-Imminent Danger - to prevent death or serious physical harm from occurring. Highest proposed fine, and what type is it? - Answer-Willful violation - $129,336 Who is cited by OSHA? - Answer-Employers/companies What is the u...