Ase a5 brakes test 2024 - Study guides, Class notes & Summaries

ASE: A5 Brakes (Test 1) | Questions with 100% Correct Answers | Latest Update 2024 | Verified

ASE A5 Practice Test Brakes | Questions and Verified Answers | Latest Update 2024/2025 A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Answer -TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. T...

ASE A5 ACTUAL EXAM (PRACTICE TEST) (BRAKES) EXAM QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED A+

(Combined Solutions) ASE Brakes A5 Test ( Exam 1 ), , ASE Brakes A5 ( Exam 3 ), ASE Brakes A5 Test ( Exam 2 ) All With Complete Verified Solutions 2023/2024, With Rationale A drum is chattering on the brake lathe. This could be a result of a. failure to install the dampening belt b. cutting too slowly c. dull cutting blades d. cutting speed too fast A : failure to install the dampening belt why : a missing dampening belt could cause the drum to vibrate while on the lathe. this vibra...

ASE A5 Test Questions with 100% Correct Answers | Latest Version 2024 | Verified 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could c...

ASE BRAKES A5 TEST EXAMS 1, 2, AND 3 | ALL QUESTIONS AND CORRECT ANSWERS | GRADED A+ | VERIFIED ANSWERS | LATEST VERSION

ASE A5 Practice Test (Brakes) | Questions and Correct Answers | Latest Update 2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - Answer -D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very er...

(Combined Solutions) ASE Brakes A5 Test ( Exam 1 ), , ASE Brakes A5 ( Exam 3 ), ASE Brakes A5 Test ( Exam 2 ) All With Complete Verified Solutions 2023/2024, With Rationale A drum is chattering on the brake lathe. This could be a result of a. failure to install the dampening belt b. cutting too slowly c. dull cutting blades d. cutting speed too fast A : failure to install the dampening belt why : a missing dampening belt could cause the drum to vibrate while on the lathe. this vibra...

ASE Brakes A5 Test ( Exam 2 ) Study Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Ans:-A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads...

ASE A5 Practice Test (Brakes) | Questions with 100% Correct Answers | Latest Update 2024 | Verified