Asme section 9 - Study guides, Class notes & Summaries

API 510 Questions and Answers 100% Pass Temp range CUI on SS material 150-400 Fitness for service code API 579 RBI code API 580 API design for fabrication of exchangers API 660 In service welding code API 2201 Alternate evaluation for pits and LTAs Section 8 div 2 Welder and weld procedure qualification Section 9 NDE personnel qualification ASNT SNT - TC - 1A AIRR Alteration, inspection, repair, rerate JUIC Jurisdiction, user, insurance company, contractor AJOC API 510...

Two Low Water cut-offs are required on a steam heating boiler when correct answers The Boiler has pumped condensate returns The ASME power piping code 31.1, limits the size of ANSI class 600 socket welded flanges for use in boiler external piping. What is the maximum size limit? correct answers 3" When welding high pressure piping that is within the boundaries known as the boiler external piping, you must have what type of ASME stamp? correct answers Power Piping If you wanted to know ...

API 570 Open Book Exam Questions and Answers 100% Pass A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: - Answer- C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - Answer- B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B mater...

API 571 PRACTICE QUESTIONS FOR API 570 EXAM What does "L" mean in Austentic SS, like 304L? A) Has a low carbon content B) has a low chrome content C) has a low nickel level D) has a low toughness level E) is lousy steel A What does "H" mean in Austenitic SS, like 316 H? A) Has a high carbon content B) has a high chrome content C) has a high nickel level D) has a high toughness level E) is horrible steel A Which of the following is NOT a Ferritic Steel? A) 300 Series SS B) ...

NEIEP 200 Final Exam (courses 205- 250): Questions & AnswersNEIEP 200 Final Exam (courses 205- 250): Questions & Answers you are about to loosen a fishplate bolt. which wrench would be least likely to slip? (Ansa. 6 point box end wrench b. 12 point box end wrench c. open end wrench you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ansa. the top of the rail needs to go towards ...

ASME B31 Code for Pressure Piping Questions and Answers 2023 ASME B31.3 Code for Process Piping Systems ASME B31 Sections B31.1 - Power Piping details piping typically found in electric power generating stations. B31.3 - Process Piping details piping typically found in petroleum refineries and chemical plants. B31.4 - Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids details piping typically used for transporting liquid products between plants and terminals. ...

API 653 Certification Practice Exam Open Book 68 Questions with Verified Answers An insert plate is required for a new 4 NPS nozzle (4.5" O.D.) in the shell. What is the minimum diameter for this insert? A. 4.5" B. 9" C. 12" D. 16.5" - CORRECT ANSWER D. 16.5" A welder is qualified on a plate in the 3G position. The welder is qualified for what fillet weld position(s)? A. None B. F, H C. F, H, V D. All fillets - CORRECT ANSWER C. F, H, V When must a shim be placed under...

1- A hydrotest is being conducted on an underground line as a substitute for the external inspection. The test pressure is 200 psig. At the end of the test, the pressure must be at least: - Correct Answer C.190 psig 2- Determine the maximum allowed pressure for a class 300 flange that has a design temperature of 950 degrees F. The flange material is ASTM A217 gr.C12 - Correct Answer B. 375 psig 3- An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness i...

ASNT VT Level II Exam (General Questions) With Complete Answers Graded A+ B. every 3 years by retraining and retesting 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transf...

ASNT VT Level II Exam (General Questions) With Complete Answers Graded A+ B. every 3 years by retraining and retesting 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transf...