Condensate drain - Study guides, Class notes & Summaries

3rd class stationary steam engineer license prep Questions and Answers 100% Pass _________ are necessary for complete combustion - Correct Answer ️️ -time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - Correct Answer ️️ -214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - Correct Answer ️️ -12 an oil cooler is commonly used with ...

1/2" - ANSWER-Sight Glass Minimum Connection 3/4" - ANSWER-Low Water Cut-off Draw Minimum Connection 1" - ANSWER-Water Column Minimum Connection 3/4" - ANSWER-Control Manifold Minimum Connection 1/4" - ANSWER-Sight Glass Drain Minimum Connection 1" - ANSWER-Bottom Blow-Off Minimum Connection 2 1/2" - ANSWER-Bottom Blow-Off Maximum Connection 2 1/2" - ANSWER-Surface Blow-Down Maximum Connection 3" - ANSWER-Threaded Safety Valve Maximum Connection 4 1/2" - ANSW...

3rd Class Stationary Steam Engineer License Prep - Complete Solutions (Answered) __________ steam turbines allow condensate to be reclaimed for use in the system Condensing With water at a temperature of 212°f, 1 bhp is equivalent to the evaporation of 34.5 lb of water every ________ hour(s) 1 In a closed feedwater heater, the _________ Steam and water do not mix Sensible heat is heat that ______ changes the temperature of a substance but not its state When performing a hydrostatic test on a ...

3rd Class Stationary Steam Engineer License Prep Exam 2024 Questions and Answers. are necessary for complete combustion - Answer<>time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - Answer<>214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - Answer<>12 an oil cooler is commonly used with a(n) ________ when operating in conju...

which of the following can inspect welds on steel I beams in a commercial structure: A. Building inspector B. Contractor C. Designed professional engineer D. Jose the weld - C See GS160D-1106 Outdoor heated pool covers shall be provided with a ________? - Class 1 vapor retardant cover Energy Code R403.10.3 In a residence, Total duct leakage shall be less than or equal to __ cfm per 100 sq/ft of conditioned floor area served by that system - 5 Energy Code R403.3.3.1 In a residence, Hea...

It is important to maintain a positive grade away from the structure of at LEAST _______ inch drop per foot for six feet. A. 1/4 B. 1/2 C. 3/4 D. 1 - 1 Which of the following BEST describes the report statement shown below? "The roof is in good condition for its age." A. Conclusion B. Recommendation C. Description D. Disclaimer - Conclusion Which of the following conditions would be LEAST critical to your client's safety? A. A pin hole in the heat exchanger B. No handrails on an interior...

Refrigeration 2 ESCO Test Questions and Answers 100% Solved liquid slugging is what ️️liquid refrigerant in the compressor clearance space a customer complains that their air conditioning system is running constantly but not cooling enough. the suction line is very cold and the compressor is sweating. the most likely cause is what ️️a restriction of the return air or a dirty evaporator the clearance space in a reciprocating compressor ️️has no effect on compressor capacity ...

Texas Mold Remediation Contractor State Exam 2024 Already Passed What does IICRC stand for? Institute of Inspection Cleaning and Restoration Certification What are the 5 principles of Mold Remediation? 1. Safety and Health Workers and Occupants 2. Document the Conditions and Work Processes 3. Control the Contaminate at is Source 4. Physically Remove the Contamination(Source Removal) 5. Correct the Moisture Problem to Prevent Recontamination What does SBS stand for? Sick Building...

If the venting on a high efficiency furnace runs through unheated spaces, what must be done? - Answer Insulate piping to prevent Condensation and freezing What is condensate drain piping used for? - Answer Dispose Liquid waste Once the furnace is installed, what are the gas technician's responsibilities to the user? - Answer To instruct the the user in the safe and correct operation of all appliances and equipment - clause 4.3.2 Which furnace type is the most popular? - Answ...

NATE Air Conditioning and Heat Pump Exam Questions and Answers Updated (GRADED A+) The maximum sensible cooling capacity of a heat pump should be within ______% of the calculated sensible heat gain of a structure with a large heating load. - ANSWER- +25% The combined output of a heatpump and its auxiliary heat should not exceed the calculated heat loss of a home by more than ____%. - ANSWER-15% What amount of auxiliary electronic heat is needed when the output of a heat pump on a design d...