Cwb level cwb welding in - Study guides, Class notes & Summaries

CWB Welding Inspector Level 1 Exam (New 2023/ 2024 Update) Questions and Verified Answers_ 100% Correct_ Graded A QUESTION For the FCAW, GMAW & SAW processes what does an increase in arc length do? a) Arc voltage does not change. b) Decreases the arc voltage drop across the arc. c) Increases the arc voltage drop across the arc. d) Amperage is increased. e) Makes no change to the amperage. Answer: c) Increases the arc voltage drop across the arc QUESTION The purpos...

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB Welding Inspector Level 1 Exam (Latest 2024 / 2025 Update) Questions and Verified Answers | 100% Correct | Grade A Q: From the welding problems identified below which one of the five does not fit the pattern established by the other four? a) Insufficient throat. b) Incorrect bevel angle. c) Loss of shielding gas. d) Improper fit up. e) Use of wrong consumable. Answer: a) Insufficient throat. Q: A 10 mm fillet weld has a nominal: a) Throat dimension of 10 mm. b) Area of 10 sq. mm. c) Leg size...

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB Level 1 Exam (New 2023/ 2024 Update) Guide with Questions and Verified Answers_ 100% Correct_ Graded A QUESTION Which of the following is a typical discontinuity with shielded metal arc welding ? Answer: slag inclusions QUESTION True or false? Larger size SMAW electrodes can be used in the flat posi- tion? Answer: True QUESTION What is the most common power source used for gas metal arc welding?- Answer: constant voltage QUESTION True or ...

CWB Welding Inspector Level III Study Guide Which of the following metals has the highest thermal conductivity? (a) carbon steel (b) stainless steel (c) aluminum - ANSWER (c) The Ellingham diagram (a) is a plot of thermal conductivity against temperature, (b) shows the free energy of oxide formation against temperature. (c) shows the rate of oxidation of metals against temperature. - ANSWER ...

CWB Level 2 Study Modules 4-5-6-7-8--22 with Complete SolutionsCWB Level 2 Study Modules 4-5-6-7-8--22 with Complete SolutionsCWB Level 2 Study Modules 4-5-6-7-8--22 with Complete Solutions During arc welding there is a zone adjacent to the weld metal that reaches high temperatures but does not melt. What is the name of this region? - ANSWER-Heat Affect Zone (HAZ) In parallel electrical circuits, the voltage across each resistor is the same since each path is connected to the same voltage so...

CWB Level 2 Module 5 Power Sources for Welding Exam Questions with Correct Answers Guide Question - Section 2 For a consumable electrode welding process the majority of the heat in DCEN polarity is concentrated on the: a) electrode b) workpiece - Answer-a) electrode Guide Question - Section 2 For a non-consumable electrode welding process the majority of the heat in DCEN polarity is concentrated on the: a) electrode b) workpiece - Answer-b) workpiece Guide Question - Secti...

CWB Level II Exam Questions and Answers Graded A What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - ️️ (D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbides, and "sweats out" ...

CWB Level 2 Module 5 Power Sources for Welding exam | Questions and Correct Solutions Latest Update 2024/2025 | Graded A+ Guide Question - Section 2 "Electric current is readily conducted in metals (low resistance) because of the many free electrons" True or false - Answer -True Guide Question - Section 2 "Conventional current flow is from negative to positive" True or False - Answer -False Guide Question - Section 2 Materials that have a high resistance to current flow are call...