Fuel filter Study guides, Class notes & Summaries

EOOW DDG FLTIIA - for Dummies Define the term "clear and bright." - Clear is the absence of particulate matter (sediment), Bright is the absence of free water, or other factors effecting color and clarity When are LO samples required? - 24 hours prior to start, Daily while operating (include equipment in auto start), Upon receipt of new oil, Within 24 hours prior to transfer or oil, When unusual conditions exist, After an equipment casualty, Test purifier sample 30 minutes after s...

P98 Exam Questions With 100% Correct Answers, Latest Updated 2024/2025 (GRADED A+) Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements a...

Journeyman Oil Exam Questions with Correct Answers The use of furnace cement or other materials to seal a cracked heat exchanger or parts which provide closure shall be for _________ repairs only. - Answer-Temporary repairs If a fuel storage tank is permanently removed from service for whatever reason, the tank and all the piping connected to it, including the outside fill and vent piping and any supply piping connected to the appliance, shall be: - Answer--Emptied of all liquid contents an...

1.- Where generally Fuel-oil is used in buildings? What purposes? Is used in Stationary Equipment Two purposes: a) Fuel Emergency Generators b) Fuel Equipment used to heat the building 2.- What COF is required to supervise the Fuel-oil transfer in the building from one floor to another? - P-98 and maintain all qualifications and comply w/ requirements applicable to such certificate holder - The P-98 COF is premise-related 3.- The use of the word should refers to: Policies, procedures a...

Tech observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? (1) - Answer-Both A and B (1) The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that the directional tires are rotated in a criss-cross pattern. Who is r...

Journeyman Oil Exam Questions and Answers | Verified & Updated| 100% Correct The use of furnace cement or other materials to seal a cracked heat exchanger or parts which provide closure shall be for _________ repairs only. - Answer ️️ -Temporary repairs If a fuel storage tank is permanently removed from service for whatever reason, the tank and all the piping connected to it, including the outside fill and vent piping and any supply piping connected to the appliance, shall be: - Answer...

When a diesel engine is operated under a load, coolant continually comes out of the radiator overflow and there are bubbles in the radiator. Which of these is the most likely cause? (A) Too much coolant in the cooling system (B) A clogged radiator (C) A stuck-open thermostat (D) Compression leakage into the cooling system - Answer-D A diesel engine has excessive black smoke when started in the morning. Which of these could be the cause? (A) A bad fuel injection nozzle (B) A restricted f...

FDNY COF P-98 Exam With 100% Correct Answers Latest Updated 2024 (Already Graded!!) Where generally *Fuel-oil is used in buildings?* What purposes?* - Correct AnswerIs used in *Stationary Equipments*, Two purposes: a) *Fuel Emergency Generators* b) *Fuel Equipment used to heat the building* 2.- What *COF is required* to supervise the *Fuel-oil transfer in the building from one floor to another?* - Correct Answer-*P-98 and maintain all qualifications and comply w/ requirements applicable to...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - ANSWER Increase Atomizing type burners were designed to burn which type of fuel - ANSWER Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - ANSWER Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - ANSWER In the furnace room with 5' of heating unit. The primary...

Truck Essentials Questions and Answers Already Passed What is the purpose of a truck’s fuel filter? The fuel filter removes impurities and contaminants from the fuel before it reaches the engine, ensuring proper engine performance. How often should a truck’s air compressor be inspected? The air compressor should be inspected regularly, according to the manufacturer's maintenance schedule, to ensure it operates correctly and efficiently. What does the truck’s oil pressure g...