Nicet 3 fire alarm exam - Study guides, Class notes & Summaries

NICET Fire Alarm Systems Level 1 Exam Verified Solutions if a combination audible/visible appliances are installed, the location of the installed appliance shall be determined by the requirements of the visible appliance what is the maximum number of 12-gaugeTHHN conductors that can be installed in 1-inch EMT 26 150 Ohms Do you resistors are connected in parallel. R1 = 300 Ohms, R2 = 300 Ohms. What is the equivalent resistance? I room is 200 feet long and 100 feet wide, and t...

NICET fire alarm systems level 1 exam already graded A if a combination audible/visible appliances are installed, the location of the installed appliance shall be determined by the requirements of the visible appliance what is the maximum number of 12-gaugeTHHN conductors that can be installed in 1-inch EMT 26 Do you resistors are connected in parallel. R1 = 300 Ohms, R2 = 300 Ohms. What is the equivalent resistance? 150 Ohms I room is 200 feet long and 100 feet wide, and the 8 foot high cei...

NICET Level I Exam Questions and Answers |100% Pass Fire Alarm Code? - Answer-NFPA 72 National Electric Code? - Answer-NFPA 70 AHJ? - Answer-Authority Having Jurisdiction Disconnecting means for fire alarm power shall be what color? - Answer-Red If a combination audible visible appliance is installed, the location of the installed appliance shall be determined by the requirements of... - Answer-The visible appliance Two resistors are connected in parallel. Resister one measures 300 ohms ...

NICET LEVEL 1 EXAM QUESTIONS AND ANSWERS |100% PASS 4 wires - Answer-what is the maximum number of 14 AWG RHH conductors which can be installed in 1/2 rigid metal conduit? 3.5'-48" to the actuator - Answer-Which of the following would be an appropriate mounting height for a pull station? 1 flash per second - Answer-What is the minimum flash rate for a visible notification device? 90" to the top of the device - Answer-What is the minimum mounting height for audible notification d...

NICET Inspect & Test LVL 2 Exam Questions And Well Elaborated Solutions Consider a smoke control system with a stairwell pressurization system. A _____ shall be provided in the air supply to the pressurized stairwell. A. Supervisory switch to monitor fan operation B. Manual fire alarm box C. Heat detector D. Smoke detector - answer -D. Smoke Detector NFPA 92 - 6.4.6.2.1 NFPA 72 states that smoke detector spacing shall be reduced where the airflow in a defined space exceeds _____ air...

NICET Level 1 inspection and Testing Exam 2024 When using a pulse load tester on a sealed lead acid battery, the minimum acceptable capacity is... -Answer-80% When a software change is made to a fire alarm system, what percentage of the initiating devices not affected by the change must be tested -Answer-10% When testing elevator recall, the elevator should go to the alternate level when: -Answer-The lobby smoke detector on the recall level is activated Minimum requirement for system docu...

Nicet Level 1 water-based systems Practice Exam Questions And Well Elaborated Solutions During an inspection, which of the following would be identified as a sprinkler which shall be replaced? - answer -Corrosion What are the inspection requirements for hangers and seismic braces installed in concealed spaces? - answer -Periodic inspection is not required Gauges shall be replaced every _____ or tested every _____ by comparison with a calibrated gauge - answer -5 years/ 5 years Where a...

NICET LEVEL 1 Real Exam Questions with Answers 4 wires - ️️ -what is the maximum number of 14 AWG RHH conductors which can be installed in 1/2 rigid metal conduit? 3.5'-48" to the actuator - ️️ -Which of the following would be an appropriate mounting height for a pull station? 1 flash per second - ️️ -What is the minimum flash rate for a visible notification device? 90" to the top of the device - ️️ -What is the minimum mounting height for audible notification devices...