Oil burner test 1 - Study guides, Class notes & Summaries

Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements applicable to such certificate holders throughout the term of their certificate. Th...

Mass oil burner / NFPA 31 & NORA Exam Practice Questions and Answers 100% Pass Cast iron fittings can be used in heating fuel systems? - Correct Answer ️️ -False Tank vent shall terminate - Correct Answer ️️ -Within 12 feet of the fill and visible from the fill Tanks exceeding 330 gallons must have - Correct Answer ️️ -Top supply connection Fuel return piping from an appliance shall - Correct Answer ️️ -Enter the top of the tank Oil appliances burning used oil shall only ...

ABSA 5th Class | 250 Questions | With Completed Solutions Where are the return openings located regarding air distribution systems? -Answer-Return air openings are located on inner walls. The minimum temperature of the water used in a hydrostatic test of a boiler cannot be less than what temperature? -Answer-20 degrees Celsius Which of the following are causes of pressure explosions? 1. effects of corrosion 2. weak pilot flame 3. stressed material due to heating too quickly 4. insuffic...

What is the first thing a tech should do when arriving at a no combustion call? - AnswerAsk how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answer- 300-10...

What must be located outside a Class T machinery room? Select one: a. Spare flashlights b. Disposable coveralls c. Machinery shut off switch d. Light switches c Degradation of heat transfer fluid of a hot oil system will begin to occur if: Select one: a. The oil filter is not serviced regularly b. The oil temperature is above a specified range, for an extended period of time c. The oil is allowed to churn in the circulating pump d. The oil becomes too viscous bDry and flooded evaporat...

ABSA 5th Class Exam Questions and Answers 100% Pass Where are the return openings located regarding air distribution systems? - Answer- Return air openings are located on inner walls. The minimum temperature of the water used in a hydrostatic test of a boiler cannot be less than what temperature? - Answer- 20 degrees Celsius Which of the following are causes of pressure explosions? 1. effects of corrosion 2. weak pilot flame 3. stressed material due to heating too quickly 4. insufficie...

Oil burner's test questions 1-200 with correct answers In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Answer ️️ -Increase Atomizing type burners were designed to burn which type of fuel - Answer ️️ -Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Answer ️️ -Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be in...

Mass oil burner / NFPA 31 & NORA Exam Practice Questions and Answers 100% Pass Cast iron fittings can be used in heating fuel systems? - Correct Answer ️️ -False Tank vent shall terminate - Correct Answer ️️ -Within 12 feet of the fill and visible from the fill Tanks exceeding 330 gallons must have - Correct Answer ️️ -Top supply connection Fuel return piping from an appliance shall - Correct Answer ️️ -Enter the top of the tank Oil appliances burning used oil shall only ...

how should an oil tank be supported - Answer-Ridgid non-combustible supports to prevent settling, sliding, or lifting what is the wire gauge used on oil burner circuits - Answer-14 gauge minimum how is an oil burner wired - Answer-oil burners are wired intermittent or interrupted what does intermittent or interrupted mean - Answer-intermittent - Transformer stays on throughout the burner firing cycle interrupted - Transformer drops out after flame established who approves oil burners in M...