Oil burners test 2 - Study guides, Class notes & Summaries

What is a general requirement of the location of the installation of a boiler? - ANSWER Adequate clearance from combustile construction What temperature must the materials remain under during combustion? - ANSWER 170 degrees What is a requirement for the access of the boiler? - ANSWER Access for operation and maintenance must not be hazardous What is required upon installation to operate a boiler? - ANSWER Inspection and test resulting in equipment use permit from commissioner How of...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Answer-Increase Atomizing type burners were designed to burn which type of fuel - Answer-Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Answer-Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - Answer-In the furnace room with 5' of heating unit. The primary purpo...

Oil Burners Test 2

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answer- 300-1000 ohms If a pump is used to bring oil to a l...

P98 Exam Questions With 100% Correct Answers, Latest Updated 2024/2025 (GRADED) Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements appl...

Where are the return openings located regarding air distribution systems? - Answer-Return air openings are located on inner walls. The minimum temperature of the water used in a hydrostatic test of a boiler cannot be less than what temperature? - Answer-20 degrees Celsius Which of the following are causes of pressure explosions? 1. effects of corrosion 2. weak pilot flame 3. stressed material due to heating too quickly 4. insufficient purge 5. scale and sludge build-up - Answer-1, 3, 5 ...

Oil Burners Questions and Answers Rated A+ According to NFPA31-2001, what is the minimum size of the vent pipe on an oil storage tank 1 1/4 inch Nozzles are available with three different spray patterns: Solid, semi-hollow, hollow What type of motor is used on a residential high pressure oil burner Split phase The most common motor speeds used in amerian made burners are 1725 and 3250 rpm If an oil has a high viscosity It is a thicker oil A service technician performs a com...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the first thing a tech should do when arriving at a no combustion call? - AnswerAsk how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - A...

P98 Exam Questions With 100% Correct Answers, Latest Updated 2024/2025 (GRADED) Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements appl...

how should an oil tank be supported - Answer-Ridgid non-combustible supports to prevent settling, sliding, or lifting what is the wire gauge used on oil burner circuits - Answer-14 gauge minimum how is an oil burner wired - Answer-oil burners are wired intermittent or interrupted what does intermittent or interrupted mean - Answer-intermittent - Transformer stays on throughout the burner firing cycle interrupted - Transformer drops out after flame established who approves oil burners in M...