Standard foam - Study guides, Class notes & Summaries

Pumper Review Question and answers already passed 2023/2024NFPA 1901, Standard for Automotive Fire Apparatus, contains the requirements of pumper design. - correct answer The standard specifies a minimum pump capacity of 750 gpm and a water tank with a capacity of at least 300 gallons. Pump capacities larger than 750 gpm increase in increments of 250 gpm with most municipal fire departments operating pumpers of 2000 gpm or less. There are, however, many pumpers in service with industrial fire de...

6.2.1 REPORTS 6 National Fire Incident Reporting System information is transmitted to the: Question 3 options: 1) U. S. Fire Administration. 2) Emergency Management. 3) Department of Homeland Security. 4) National Fire Protection Association. - Answer-1) U. S. Fire Administration. 6.2.2 COMMUNICATIONS 21 An employee becomes frustrated because they cannot comply with conflicting orders from different bosses. This situation was most likely caused by a violation of: Question 5 options: 1...

Internal Medicine EOR Review (UPDATED TABLE GUIDE). Internal Medicine EOR Review Cardiology (20%) Angina Pectoris Stable Unstable Prinzmetal Predictable pattern* Aggravated c exertion; alleviated c rest or NTG; Caused by FIXED* plaque EKG: STd ONLY* Outpatient Setting Unpredictable pattern* New onset while RESTING*; NOT alleviated c rest EKG: STd or TWi* MUST ADMIT* Unpredictable/EPISODIC pattern* Triggered by COCAINE*, alcohol or triptans* EKG: STe +/- reciprocal changes M...

Pumper Review Practice Questions 2024. NFPA 1901, Standard for Automotive Fire Apparatus, contains the requirements of pumper design. - correct answer The standard specifies a minimum pump capacity of 750 gpm and a water tank with a capacity of at least 300 gallons. Pump capacities larger than 750 gpm increase in increments of 250 gpm with most municipal fire departments operating pumpers of 2000 gpm or less. There are, however, many pumpers in service with industrial fire departments that exce...

Z-51 Written Exam Questions and Complete Solutions In a steam turbine, what is the function of a Kingsbury thrust bearing? A) Maintain first stage steam pressure. B) Compensate for coupling misalignment. C) Adjust shaft torque at start up. D) Maintain axial positioning of the rotor shaft. - Answer: D) Maintain axial positioning of the rotor shaft. The ratio of actual pressure of water pressure in the atmosphere to the saturated pressure of given temperature is A) partial pressure....

What are different tools to assess pain? - 1-10 scale, face scale When is a patient's pain level tolerable? - When they say it is How soon after giving a pain medication should you reassess a patient's pain level? - IV - 30min or less, PO - 30min-1hr What are standard precautions used for? - Every patient What is droplet precautions used for? - Flu, RSV, Pertussis, R/O Meningitis A patient with pneumonia pneumonia is on which type of precaution? - Standard - however is the patient is co...

skills and techniques USAHS Midterm Exam Questions and Answers 100% Pass what is contact precautions? - Answer- used to prevent transmission of infectious agents that are spread by direct or indirect contact with patient or environment. when would you use contact precautions? - Answer- excessive wound drainage, fecal incontinence, other discharges from body with increased risk of transmission what are the Contact precautions guidelines? - Answer- wash hands before and after entering, glov...

NFPA 25 correct answers Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems AFFF stands for? correct answers Aqueous Film Forming Foam What percentage net weight loss on a halon 1301 system requires refill/replacement ? correct answers 5% Net WEIGHT What percentage pressure loss on a halon 1301 system requires replacement/refill ? correct answers 10% PRESSURE What percentage loss on c02 system requires replacement ? correct answers 10% NFPA...

NFPA 10 Latest Update Rated A+ (SI) International System of Units 1 in=. mm 25.4 Approved Acceptable to the authority having jurisdiction. (AHJ) Authority Having Jurisdiction O rganization, office or individual responsible for enforcing requirements of a code or standard, or for approving equipment, materials, an installation or procedure. Shall Indicates a mandatory requirement. Should Indicates a recommendation or that which is advised but not required. Dry Chemical A po...

FAE Questions and Answers Already Passed The speedometer on an apparatus is primarily used to show speed but may also indicate the pump is turning To calculate friction loss in 2 1/2" fire hose when the flow is near 100 gpm, which of the following formulas should be used? FL=cq(2)L The pressure remaining once water has begun flowing is known as _____ pressure. residual When the flow through a hose line increases from 100 gpm to 400 gpm, the friction loss increases _____ times....