16 awg - Study guides, Class notes & Summaries

What does PLFA stand for? - Answer- Power Limited Fire Alarm What does NPLFA stand for? - Answer- Non Power Limited Fire Alarm What material must NPLFA circuit conductors be made from - Answer- Only solid or stranded copper is permitted What is a single station detector? - Answer- Battery powered smoke detectors that do not communicate off premises. What is a multiple station detector? - Answer- Mains powered smoke detectors with battery backup that are linked together, so that if on...

circuit breaker mean? a. The breaker is inexpensive b. The breaker will have lots of nuisance trips c. The breaker will trip out regardless of conditions d. The breaker will only trip at 150% of its rated amperage b. 8 amps (E-11 Table XII Conductor Ampacity - Flexible Cords) - ANSWER maximum current carrying capacity for an flexible cord of 16 AWG with 2 current carrying conductors inside the engine spaces is a. 6 amps b. 8 amps c. 10 amps d. 20 amps c. only in one direction - ANS...

NEC 2011 Journeyman Electrical Exam Study Guide (Michigan) Grounding and Bonding: Where outside, aluminum or copper-clad aluminum grounding electrode conductors shall not be terminated within ____in. of Earth. A. 12 in. B. 18 in. C. 24 in. D. 36 in. - B. 18 in. 250.64(A) Temporary Installations: When used by personnel during construction, remodeling, maintenance repair, or demolition of a building, GFCI (ground fault circuit interrupter) protection is required for all 125 ...

ABYC Electrical Exam Questions and Answers Latest Updated Which tool is most approprite to clean battery connections? A. B. C. D. The minimum amp circuit breaker that should be used to protect 120V water heater circuit with a 1600-watt element would be rated at _________ amps. A. 15 B. 10 C. 20 D. 30 A. 15 When testing for excessive EMF emissions near a conductor or appliance, the tool of choice is a(an): A. Ohmmeter B. DVOM C. Gauss meter D. infrared sensor C. Gauss...

Does a fire hood system and a kitchen need to be monitored by the fire alarm system? Answer - Yes What does PLFA stand for? Answer - Power Limited Fire Alarm What does NPLFA stand for? Answer - Non-Power Limited Fire Alarm What is the difference between PFLA and NPFLA? Answer - an NPLFA can operate at up to 600v, and the power output isn't limited a PLFA has the voltage and power limited by a listed power source. What material must NPFLA circuit conductors be made from? Answer - ...

Hvac Journeyman Exam Questions and Answers 100% Pass Defects on gas piping or fittings shall be _____.(A) repaired(B) replaced or repaired and retested(C) repaired by a certified welder(D) ignored, as the operating pressure is much less than the air test. - Correct Answer ️️ -B. Fitting shall be replaced or repaired and retested. UMC Section 1316.4.3 Every absorption refrigerating system supported from the ground shall rest on a concrete slab extending not less than _____ the adjoinin...

Codes address the safety of persons, property and the environment associated with the ITS cabling installation. - correct answer TRUE The IEEE standard associated with Ethernet (or LANs) is 802.3 - correct answer TRUE "TIA" stands for Telecommunications Industry Association. - correct answer TRUE "Codes" use words like "shall" and/or "shall not." - correct answer TRUE The "NESC" generally applies to indoor cabling installations. - correct answer FALSE ETA cease...

Electrical Journeyman Test Study Guide A fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. a. Light b. Medium c. Heavy d. Extra Heavy - c. Heavy From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in subsection (3), and individual other than an individual who is licensed under this article and ______________ working under the direction of a holder of an electrical contractors licence, shall not in any manner underta...

A fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. a. Light b. Medium c. Heavy d. Extra Heavy - ANSWERc. Heavy From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in subsection (3), and individual other than an individual who is licensed under this article and ______________ working under the direction of a holder of an electrical contractors licence, shall not in any manner undertake to execute any electrical work"...

IEC First Year Exam Study Guide Questions with Verified Solutions ___ can be described as the point of demarcation between where the serving utility ends and the premises wiring begins. Service Point A 12/3 cable is installed from a 120/240-V, 1Ø panel and feeds a split-wired duplex receptacle. One "hot" is connected to a 20A breaker in panel space 1. The second "hot" is connected to a 20A breaker in space 3. A 16-amp load is connected to the upper receptacle and a 14-amp load is ...