Air atomizing burner - Study guides, Class notes & Summaries

What is the first thing a tech should do when arriving at a no combustion call? - Answer- Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answe...

Where are the return openings located regarding air distribution systems? - Answer-Return air openings are located on inner walls. The minimum temperature of the water used in a hydrostatic test of a boiler cannot be less than what temperature? - Answer-20 degrees Celsius Which of the following are causes of pressure explosions? 1. effects of corrosion 2. weak pilot flame 3. stressed material due to heating too quickly 4. insufficient purge 5. scale and sludge build-up - Answer-1, 3, 5 ...

Stationary Engineer Vocabulary Pre Test Questions And Answers Accumulation test - CORRECT ANS : test used to establish the relieving capacity of boiler safety valves Air atomizing burner - CORRECT ANS : insidemixing fuel oil burner that uses compressed air from an air compressor for atomization Air flow switch - CORRECT ANS : safety device used with rotary cup burners. prevents firing cycle from starting if there is no primary air at the burner Alkali - CORRECT ANS : compound t...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Answer-Increase Atomizing type burners were designed to burn which type of fuel - Answer-Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Answer-Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - Answer-In the furnace room with 5' of heating unit. The primary purpo...

Oil Burner License Exam Questions and Answers, Latest Updated 2024/2025 (Verified Answers) What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answer- 300-1000 ohms If a pump is used to bring oil to a l...

In an electric circuit for the wattage to remain the same if the voltage drops, the amperage must - Answer-Increase Atomizing type burners were designed to burn which type of fuel - Answer-Type 2 fuel oil Pour point problems with outside above ground fuel tanks can be partially relieved by - Answer-Reducing the pour point of No. 2 fuel oil by blending it with No. 1 fuel oil. A fuel oil storage tank cannot be installed - Answer-In the furnace room with 5' of heating unit. The primary...

accumulation test - ANSWER test used to establish the relieving capacity of boiler safety valves air atomizing burner - ANSWER inside-mixing fuel oil burner that uses compressed air from an air compressor for atomization air flow switch - ANSWER safety device used with rotary cup burners. prevents firing cycle from starting if there is no primary air at the burner alkali - ANSWER compound that contains hydroxide, such as sodium hydroxide and calcium hydroxide analog-in (AI)point - AN...

P98 Exam Questions With 100% Correct Answers, Latest Updated 2024/2025 (GRADED) Fuel-oil is generally used in buildings in stationary equipment for two purposes - Correct Answer-fuel emergency generators or to fuel equipment used to heat the building. the person supervising the Fuel-Oil Transfer in the Building from one floor to another must hold - Correct Answer-P-98 Certificate of Fitness. Certificate of Fitness holders must maintain all qualifications and comply with all requirements appl...

FDNY COF P-98 Exam With 100% Correct Answers Latest Updated 2024 (Already Graded!!) Where generally *Fuel-oil is used in buildings?* What purposes?* - Correct AnswerIs used in *Stationary Equipments*, Two purposes: a) *Fuel Emergency Generators* b) *Fuel Equipment used to heat the building* 2.- What *COF is required* to supervise the *Fuel-oil transfer in the building from one floor to another?* - Correct Answer-*P-98 and maintain all qualifications and comply w/ requirements applicable to...

The variable compassionately pressure at amazing fuel oil burner functions to correct answersProvide a wide range of combustion The process of breaking up fuel oil into fine particles to ensure good combustion is called correct answersAtomization The primary purpose of the sprayer play in the mechanica atomizing Oil burner is to correct answersProduce a fine uniform fuel must What is indicated by the code number 30 2Y20 stamped on the burner sprayer plate correct answersSprayer play ori...