Ase engine repair 2025 - Study guides, Class notes & Summaries

ASE A1 (Engine Repair) Practice Test | Questions and Correct Answers | Latest Update 2024/2025 an engine miss is being diagnosed using a cylinder leakage test. Technician A says that any cylinder with over 20% leakage has excessive leakage. Tech B says that air leaking from the tailpipe indicates a cracked cylinder. A only, B only, A & B, Neither . - Answer -A only: If cylinder leakage exceeds 20%, check for air escaping the tailpipe, the PCV valve opening in the rocker arm cover, a...

ASE G1 | Questions and Correct Answers | Latest Update 2024/2025 (Suspension & Steering) A front wheel drive van with non-independent rear suspension shows serve rust and corrosion of the "U" shaped rear axle. Technician A says that such corrosion may weaken the axle and make it vulnerable to torsional stress. Technician B says that such a condition could lead to cracks or complete breakage of the axle. Who is correct? Both A and B (Engine Systems) While road testing a vehicle, a tec...

ASE - Engine Repair | Questions and Correct Answers | Latest Update 2024/2025 Technician B says that Part 'X' is used to correct installed spring height. Who is right? - Answer -B. Technician B only A compression test shows that one cylinder is too low. A leakage test on that cylinder shows that there is excessive leakage. During the test, air could be heard coming from the tailpipe. Which of the following could be the cause? - Answer -D. an exhaust valve not seating Technician A says...

ASE A1 (ENGINE REPAIR ) PRACTICE TEST – CUMULATIVE 2024- 2025 EXAM |ACTUAL COMPLETE QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS ) A GRADE. ASE A1 (ENGINE REPAIR ) PRACTICE TEST – CUMULATIVE 2024- 2025 EXAM |ACTUAL COMPLETE QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS ) A GRADE. ASE A1 (ENGINE REPAIR ) PRACTICE TEST – CUMULATIVE 2024- 2025 EXAM |ACTUAL COMPLETE QUESTIONS AND CORRECT ANSWERS (VERIFIED ANSWERS ) A GRADE. ASE A1 (ENGINE REPAIR ) PRACTICE TEST – CUMULAT...

ASE test T2 Practice test 2 Questions and Answers (100% Pass) A diesel engine is using too much oil. All of the following could be the cause EXCEPT A. Worn piston rings B. Worn valve guides C. Worn valve seats D. Loose oil pan fasteners - Answer️️ -C. Worn valve seats (work valve seats can cause low compression, but will not cause oil consumption) Which of the following would be used to check liner installed height? A. Dial indicator/ Sled gage B. Inside micrometer C. Outside m...

ASE A1 Engine Repair. Questions & 100% Verified Correct Answers with complete solutions (Latest update 2024 2025

Complete ASE Practice Test 3 (Lubrication and Cooling Systems Diagnosis and Repair) "Engine Block Diagnosis and Repair" (page 68 to 75) from ASE A1 Practice Study Guide with Complete Solutions Technician A says that before installing an oil pump, it should be primed with clean engine oil. Technician B says that before installing an oil pump, the position of the pickup screen should be checked to make sure it fits closely to the bottom of the oil pan. Who is right? - Answer️️ -The co...

ASE B-5 Mechanical/Electrical Practice Exam Questions and Answers A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - Answer️️ -Technician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufact...

ASE Auto Maintenance & Light Repair Test (Test G1) Practice Questions and Answers A tight timing belt makes what type of noise? - Answer️️ -Whining A RWD (rear wheel drive) transmission has a leaking output shaft seal on a vehicle with 25,000 miles on the odometer. The MOST likely cause for the leakage is: - Answer️️ -plugged transmission breather filter Of the following, when replacing a CV (constant velocity) joint or boot, what is the last step before clamping the boot? - Answ...

ASE A5 Brakes Exam Questions And Solutions(Well Elaborated)2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - answers D. This question has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very erratic brake pulling concern while applying t...