Ase brake 2025 - Study guides, Class notes & Summaries

ASE brake questions and Correct Answers | Latest Update 2024/2025 | Graded A+ Which type of drum is most common in passenger vehicles? Choose one answer. a. Hubless-style drum b. Rotor-style drum c. Hub-style drum d. Rotorless-style drum - Answer -a. Hubless-style drum A(n) __________________ is commonly used to activate drum-type friction brakes on a trailer that its gross weight exceeds a certain value. Choose one answer.a. surge brake b. electric braking system c. Both A and B

ASE Practice Exam Questions & Answers 2024/2025 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - ANSWERSC 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? A. ...

ASE BRAKES Exam #1 | Questions and Correct Answers | Latest Update 2024/2025 A - Answer -A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - Answer -A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power...

ASE (Entry level technician prep) - Brakes A5 | Questions and Correct Answers | Latest Update 2024/2025 A5 Question 1 The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: A) Binding pedal linkage. B)Dented brake line. C)Plugged compensating port.D)A weak hydraulic hose. - Answer -Answer D is correct! Binding pedal linkage would cause a hard pedal and perhaps an effective brake system. This is also...

ASE Exam #1 Questions & Answers 2024/2025 A - ANSWERSA drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. C - ANSWERSA vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power steering fluid D. An overtightene...

ASE A5 Test | Questions and Correct Answers | Latest Update 2024/2025 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - Answer -1. The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylinder ...

ASE Prep Exam Questions & Answers 2024/2025 A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - ANSWERSTechnician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufacturers recommend replaceme...

ASE A5 – Brakes Test | Questions and Correct Answers | Latest Update 2024/2025 On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. Proportioning valve B. Pressure safety switch C. Metering valve D. Residual check valve - Answer -The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylind...

ASE A5 Practice Test (Brakes) | Questions and Correct Answers | Latest Update 2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - Answer -D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very er...

MLR ASE Test Questions & Answers 2024/2025 Both A and B - ANSWERSTechnician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - ANSWERSThe tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that directio...