Asme code Study guides, Class notes & Summaries

MASS 2A-1C Hoisting Exam Questions With Verified Answers How many pounds in a ton? - answer2000 pounds What type of equipment requires a H/H license in Mass? - answer10 feet or either, 1/4 cu/yd 500 pounds What type of system is used when working on de-energized circuitry? - answerLock out/Tag out All welding and cutting on hoisting equipment must be done in accordance with what code? - answer1998 ASME Chapter IX What type of protection is required for hoisting operation? - answerROPS, ...

2024 update DC Third testing Questions and Answers 100% Pass The component in which liquid vapor by absorbing heat is called? - Correct Answer ️️ - Evaporator Select the best answer electrical grounding method? - Correct Answer ️️ -Metal stake drive 8 foot into the ground. A _____ valve should be used for throttling purpose? - Correct Answer ️️ -Globe What is the acceptable range for residual sodium sulfite in the boiler maintain? - Correct Answer ️️ -30-70 What is the B...

What is the acronym for the American Society of Mechanical Engineers? - correct answer ASME What is the acronym for The National Board of Boiler and Pressure Vessel Inspectors? - correct answer NBBI The Alberta Boilers Safety Association (ABSA) is responsible for the administration of the legislation for _________ and _________. - correct answer boilers, pressure vessels What designates the classification of the certificate of competency, required for the role of chief power engin...

ASME Code with Over 50 Questions and Answers.ASME Code with Over 50 Questions and Answers.

Also known as NFPA 54, the __________ covers fire prevention and installation standards for fuel gases, as well as the installation of piping and appliances for residential and commercial applciations - CORRECT ANS A. Liquefied Petroleum Gas Code B. American Standards National Institute C. National Fuel Gas Code D. Unfired Boiler and Pressure Vessel Code Tanks and pressure relief valves built according to the ASME code are usually marked with a special ASME stamp. - CORRECT ANS Tru...

2023 update ASME CSD-1 codes Questions and Answers When a lower water fuel cut off has activated on a hot water heating boiler, what happens ? Causes a safety shutdown and lockout, requiring a manual reset The Mechanical Inspection Bureau incorporates by reference various codes, standards and practices. Once specific safety practice incorporated by reference for licensed operators specifies and identifies one called a qualified individual. How is the qualified individual identified in t...

Also known as NFPA 54, the __________ covers fire prevention and installation standards for fuel gases, as well as the installation of piping and appliances for residential and commercial applciations - CORRECT ANS A. Liquefied Petroleum Gas Code B. American Standards National Institute C. National Fuel Gas Code D. Unfired Boiler and Pressure Vessel Code Tanks and pressure relief valves built according to the ASME code are usually marked with a special ASME stamp. - CORRECT ANS True Pro...

Where do you find (in which code book) the approved materials to be used in the venting of regulators? Chapter and Section? A. NFPA, 6.10.1.6 B. NFPA 58, 5.10.3.1 C. NFPA 54, 3.3.99.5 D. NFPA 54, 3.3.101 Correct Answer B. NFPA 58, 5.10.3.1 Where do you find which testing needs to be performed in the installation of a new appliance into an existing system? Chapter & Section? A. NFPA 54, 8.2 B. NFPA 58, 12.6 C. NFPA 54 Annex D D. NFPA 54, 10.26 Correct Answer A. NFPA 54, 8.2 Af...

MN State Special Boiler License Advanced Study Guide 2024. ASME - correct answer American Society of Mechanical Engineers NBIC - correct answer National Board Inspection Code A high-pressure steam boiler is required to have ______ valves on the main steam line. - correct answer 2 10 square feet is equivalent to _____ boiler horsepower for conventional boilers - correct answer 1 Minimum size pipe to be used to connect a water column to high pressure boilers - correct answer 1 inch ...

CETP 1.0: Module 8 2024 | Questions with 100% Correct Answers | Verified | Latest Update | Graded A+ All cylinders built today are built according to _____ specifications. Before 1967, these specifications were under the control of the Interstate Commerce Commission. - A. EPA B. ASME C. PERC D. DOT Which of the following is a type of cylinder? - A. Cargo B. Return C. Portable D. Movable Regardless of the intended service every cylinder has a device to protect the cylinder _____. - A. Va...