Combustible liquid - Study guides, Class notes & Summaries

Clean Agent ANS: - Electrically non-conducting, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. High-Pressure Cylinder ANS: - containing nitrogen, compressed air, carbon dioxide, or other gases at a pressure higher than 500 psi (3447 kPa) at 70°F (21°C). Low-Pressure Cylinder ANS: - containing fire- extinguishing agent (medium), nitrogen, compressed air, or other compressed gases at a service pressure of 500 psi (3447 kPa) or lower at 70°...

P-99 / Low PSI Oil Burner Operator Questions and Answers 100% Solved All heating, combustion, and cooking equipment shall be provided with insulation or the building construction shall be fire protected, so that during operation the surface of combustible construction materials will not be raised to a temperature higher than ____. 170 ̊F Acceptance tests: Boilers shall not be placed in operation upon completion of construction until they have been ____ and an equipment use permit has ...

C-92 FLAMMABLE OR COMBUSTIBLE LIQUIDS QUESTIONS AND ANSWERS LATEST UPDATES. A PERMIT IS REQUIRED FOR CLASS 1 LIQUIDS, OTHER THAN PAINTS, VARNISHES, AND PETROLEUM WHEN THE AMOUNT EXCEES ____________. - correct answers.5 GALLONS A PERMIT IS REQUIRED FOR CLASS 1 PETROLEUM BASED FLUIDS IN EXCESS OF ___________ GALLONS. - correct answers.2.5 A PERMIT IS REQUIRED FOR CLASS 1, 2, AND 3 LIQUIDS WITH A FLASH POINT OF 300 DEGREES OR LESS WHEN THE AMOUNT EXCEEDS _________...

The following are types of what? LPG, CNG, piped natural gas or solid fuel (coke). - correct answer Portable fueled salamanders/space heaters National Institute for Occupational Safety and Health (NIOSH) Recommended Exposure Limit (REL) for carbon monoxide - correct answer 35 parts per million (ppm) over an 8 hour period What is the third leading cause of fires in buildings under construction ? - correct answer temporary heating What is direct heat flow through matter? - correc...

Boiling Point The temperature at which a liquid changes to a vapor. The boiling point and flash point of a flammable liquid determine its category. Bond Wire A metal wire that connects two objects to reduce the buildup of electrical charges between them. Bond wires are used when transferring flammable and combustible liquids from one container to another. Physically connecting two electrically conductive objects to eliminate any difference in their static charge potential. Metal containers a...

G-60 - Use of oxygen and flammable gasses, or LPG or CNG for any hot work COF exception - Torch operations for jewelry FDNY permit - Storing using or handling oxygen and flammable gas in excess of 400scf (LPG, CNG or scetylene) oxidizing gass in excess of 504scf Portable LPG must not be stored when the capacity of the container is greater than? - 16.4 oz Portable CNG containers must not be stored then the capacity is greater than? - 8.7 SCF Single standard portable LPG c...

NFPA 10 Exam 99 Questions with Verified Answers (SI) - CORRECT ANSWER International System of Units 1 in=. mm - CORRECT ANSWER 25.4 Approved - CORRECT ANSWER Acceptable to the authority having jurisdiction. (AHJ) - CORRECT ANSWER Authority Having Jurisdiction O rganization, office or individual responsible for enforcing requirements of a code or standard, or for approving equipment, materials, an installation or procedure. Shall - CORRECT ANSWER Indicates a mandatory requirement....

Combustible Liquid - A liquid with a flash point ABOVE 100F 12.5 - If the current flowing out from an electrical panel is 12.5 amps, and it then flows through an electrical load of 1500 watts, what is the amperage of the remaining current flow of the return circuit? 1000 - If a hair dryer draws 8.3amps (in a home with 120-volt service), what is the wattage? *Power (P) = current (I) x voltage (V) Watts = amps x volts 1987 - The year of the first edition of NFPA 1033 1.5 times - ...

Fire Officer I EXAM LATEST ACTUAL EXAM QUESTIONS AND ANSWERS (100% VERIFIED ANSWERS) | GRADED A+. What are the 5 types of building construction? - CORRECT ANSWER Type 1- fire resistive Type 2- non combustible Type 3- ordinary Type 4- heavy timber Type 5- wood frame -Type 1 and 2 are non combustible -Type 3, 4, and 5 are combustible Fire drills in schools - CORRECT ANSWER Done monthly, different times of day Rough drawing of building is called - CORRECT ANSWER Field sketch Microwave ...

Fire Inspector 2 Questions and Answers 100% Solved Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. 500 - 1500 gpm A fire pump serving a standpipe system should be tested ______ weekly A fire department pumper can effectively supply around ______ feet in a high rise building depending on hyd...