Cwb 1 exam 2024 - Study guides, Class notes & Summaries

CWB Welding Inspector Level 3 Exam Prep (Latest 2023/ 2024 Update) Questions and Verified Answers| All Modules Covered| 100% Correct| Grade A Q: Fluxes that can dissolve the oxides on Al are ............ Answer: Halide compounds ( Fluorine, chlorine, Bromine etc.) Q: Chlorine gas from a Chloride flux in presence of an arc can create poisonous gas called .......... Answer: Phosgene (COCL2) or Mustard gas produced by the reaction of chlorine and carbon monoxide in the prese...

CWB Welding Inspector Level 3 Exam Prep (Latest 2024 / 2025 Update) Questions and Verified Answers | All Modules Covered | 100% Correct | Grade A Q: Fluxes that can dissolve the oxides on Al are ............ Answer: Halide compounds ( Fluorine, chlorine, Bromine etc.) Q: Chlorine gas from a Chloride flux in presence of an arc can create poisonous gas called .......... Answer: Phosgene (COCL2) or Mustard gas produced by the reaction of chlorine and carbon monoxide in the presence of intense light...

CWB Welding Inspector Level 2 Exam Prep (Latest 2024 / 2025 Update) Questions and Verified Answers | All Modules Covered | 100% Correct | Grade A Q: In an isometric drawing, the lines (for width, length and depth) are inclined at an angle of how many degrees? Answer: 30° Q: What are the maximum number of views in an orthographic drawing? Answer: 6 Q: What are the two general classes of picture drawings? Answer: Perspective and Isometric Q: What are the 5 basic joints? Answer: 1) Butt 2) Corner ...

CWB Level 1 Exam Prep (Latest 2024 / 2024 Update) Questions and Verified Answers | 100% Correct | Grade A Q: Why must European drawings be studied carefully before fabricating parts? Answer: The drawings may employ the use of first angle projection Q: How many principal views are there in an orthographic projection? Answer: 6 Q: What is the angle of inclination most commonly used on an isometric drawing? Answer: 45degree Q: Which lines appear thicker on an engineering drawing? Answer: object lin...

CWB Level 1 Exam Prep (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: Why must European drawings be studied carefully before fabricating parts? Answer: The drawings may employ the use of first angle projection Q: How many principal views are there in an orthographic projection? Answer: 6 Q: What is the angle of inclination most commonly used on an isometric drawing? Answer: 45degree Q: Which lines appear thicker on an engineeri...

CWB Welding Inspector Level 1 Exam (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: From the welding problems identified below which one of the five does not fit the pattern established by the other four? a) Insufficient throat. b) Incorrect bevel angle. c) Loss of shielding gas. d) Improper fit up. e) Use of wrong consumable. Answer: a) Insufficient throat. Q: A 10 mm fillet weld has a nominal: a) Throat dimension of 10 mm. b) Area of ...

CWB 1 Exam 2024 Questions & Answers | 100% Correct | Verified

1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c) Slag inclusions. d) Cracking. e) Burn through . - d) Crack...

CWB 1 Exam 2024 Questions & Answers | 100% Correct | Verified 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Poro...

1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c) Slag inclusions. d) Cracking. e) Burn through . - d) Crack...