Galvanic action - Study guides, Class notes & Summaries

Dew point is the temperature at which - answercondensation occurs. You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: - answerDocument the problem and advise the Contractor and Owner's representative. If a contractor is using a poorly maintained compressor to supply air for abrasive blast clean...

What document should be reviewed prior to arriving to a job site to determine if amines or polyamides will be present? - Answer - Safety Data Sheet (SDS), formerly MSDS Specification term: Will - Answer - The owner is responsible for performing the action Specification term: Should - Answer - The contractor is strongly recommended but not required to preform the action Specification term: May - Answer - The contractor has open choice on actions Specification term: Shall - Answer - The cont...

NACE CIP 1 CBT Exam (Quizzes and Study Questions) How is the process of steel corrosion ALWAYS described? - ANSWER electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - ANSWER zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - ANSWER decrease The e...

Electrology Questions and answers rated A+* The blend or dual method effcects permanent hair removal by? - correct answer High frequency and galvanic current In the blended current method, the chemical action is sped up by? - correct answer Heat Due to the heat action of the high frequency, the blend requires? - correct answer 1/4 the amount of galvanic lye originally needed Which area of the body is more susceptible to pitted scarring? - correct answer Face An important fact...

Turbidity in wastewater is caused by A. color B. dissolved calcium C. hardness D. finely divided suspended material - Answer-D. finely divided suspended material The gas most commonly associated with septic wastewater is A. carbon dioxide B. carbon monoxide C. hydrogen sulfide D. methane - Answer-C. hydrogen sulfide How many cubic meters per second in 10 MGD? A. 0.44 B. 1.44 C. 4.73 D. 24.62 - Answer-A. 0.44 Mechanical ventilation of a lift station is required to A. lower tempera...

IBEC ELECTROLOGY EXAMINATION Questions And Revised Correct Answers >> Already Passed * The blend or dual method effcects permanent hair removal by? - ANSWER : High frequency and galvanic current In the blended current method, the chemical action is sped up by? - ANSWER : Heat Due to the heat action of the high frequency, the blend requires? - ANSWER : 1/4 the amount of galvanic lye originally needed Which area of the body is more susceptible to pitted scarring? - ANSWER ...

Describe Passivation - correct answer Passivation is the formation of a protective oxide film on the surface reducing its chemical activity and its ability to corrode. Describe the following factors and how they affect corrosion: - correct answer • Oxygen: Oxygen increases the rate of corrosion. • Temperature: Corrosion usually accelerated with increasing temperature • Chemical Salts: Increase the rate of corrosion by increasing the efficiency of the electrolyte. • Humidity (or Wet...

NACE CIP LEVEL 1 CBT EXAM WITH 500 PRACTICE QUESTIONS AND CORRECT ANSWERS GUARANTEED PASS/ NACE CIP LEVEL 1 EXAM 2024 TEST BANK (NEW!!) You have just received your NACE CIP Level 1 certification when you are asked to supervise a team of uncertified field pipeline inspectors. Your FIRST preferred course of action is to: - ANSWER-Review the NACE Attestation prior to making a decision. The initial steel condition is important to the NACE Inspector because: - ANSWER-The Inspector may ha...

Florida Cosmetology Questions and Answers Already Passed what is the term used for designing a work environment that fits the human body, its movements, and cognitive abilities. ergonomics Aniline derivative tints are: Oxidative tints Which of the following can be accomplished more easily using the scissors-over-comb technique Close taper near the hairline Iontophoresis, cataphoresis, anaphoresis and desincrustation are terms associated with Galvanic A round face can be made...

NACE CIP 1 CBT Exam Question and answers verified to passNACE CIP 1 CBT Exam (Quizzes and Study Questions) How is the process of steel corrosion ALWAYS described? - correct answer electrochemical Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - correct answer zinc, aluminum, magnesium A decrease in temperature will generally cause the corrosion rate to _____ - correct answer decrease ...