Hoist up raise load - Study guides, Class notes & Summaries

NEIEP 200 Final Exam Version 2 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: a mechanic attaches a chainfall to a hoisting beam with a beam clamp. what happens to the capacity of the hoisting beam? Answer: it is reduced to 50% of original capacity Q: you are rigging elevator equipment with a sling angle of 60 degrees. you are using a shouldered eye bolt with a tapped 1/2" diameter hole. once the shoulder is seated, what is the minimum thread...

1. A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required?: Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave 2. A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do?: Replace it with a larger MOV 3. On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue?: Suicide Circuit 4. You have an old DC ...

Mechanics Exam Review-NEIEP QUESTIONS AND ANSWERS A contractor wants to raise the car speed from 100 fpm to 125 fpm, it currently has a 12" sheave. What is required?, A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do?, On a Ward-Leonard circuit the brake is set, but the motor is trying to slip through the brake. What is the issue?, You have an old DC motor and are adding an SCR drive, what do you do to the interpoles?, A hydro run...

Hoisting Hand Signals Latest Update Graded A+ Hoist (Crane) with forearm vertical, forefinger pointing up, move hand in small horizontal circle Lower (Crane) With arm extended downward, forefinger pointing down, move hand in small horizontal circle Use Main Hoist (Crane) Tap fist on head; then use regular signals Raise Boom (Crane) Arm extended, fingers closed, thumb pointing upward Use Whipline (Auxiliary Hoist) (Crane) Tap elbow with one hand; then use regular hand ...

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - CORRECT ANS Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - CORRECT ANS Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - CORRECT ANS Suici...

State Certification Exam for Massachusetts 1C Hoisting License 2024 Updated hoist up raise load - CORRECT ANSWERhoist down lower load - CORRECT ANSWERraise boom up - CORRECT ANSWERlower boom down - CORRECT ANSWERstop - CORRECT ANSWERemergency stop - CORRECT ANSWERswing (left or right) - CORRECT ANSWERtravel (both tracks) - CORRECT ANSWERturn - CORRECT ANSWERload in travel carrier - CORRECT ANSWERdog everything - CORRECT ANSWERextend boom arm out - CORRECT ANSWER

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - Answer- Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - Answer- Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - Answer- Suicide Circuit ...

Mechanics Exam Questions and Answers Already Passed ** An MOV burns out, you replace it but cannot read voltage or resistance. What should you do? Replace it with a larger one (630) * On a Ward-Leonard circuit, the brake is set but the motor is trying to slip through the brake. What circuit is the issue? Suicide circuit (425) ** A Hydro runs up with no load but does not run up with a full load. What is the issue? The relief valve is set too low (805) ** Runby for a 1:1 car hits t...

NEIEP 200 Final Exam Questions With Answers Latest Updated 2024/2025 (100% VERIFIED) you are using a plumb line to check a rail for plumb. you find that at the top it measures 1" and at the bottom it measures 1 1/4". what does this tell you? (Ansa. the top of the rail needs to go towards the center b. the top of the rail needs to go toward the wall c. the bottom of the rail needs to go toward the wall you are plumbing rails on a high rise installation. what type of plumb line should you...

A contractor wants to raise the car speed from 100 fpm to 125 fpm, it currently has a 12" sheave. What is required? - Answer-100 fpm/125 fpm= 12"/ X =15 A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - Answer-Replace it with a larger MOV - 630 On a Ward-Leonard circuit the brake is set, but the motor is trying to slip through the brake. What is the issue? - Answer-Suicide Circuit - 425 You have an old DC motor and are...