Minimum tension - Study guides, Class notes & Summaries

NFPA 10 Exam 99 Questions with Verified Answers (SI) - CORRECT ANSWER International System of Units 1 in=. mm - CORRECT ANSWER 25.4 Approved - CORRECT ANSWER Acceptable to the authority having jurisdiction. (AHJ) - CORRECT ANSWER Authority Having Jurisdiction O rganization, office or individual responsible for enforcing requirements of a code or standard, or for approving equipment, materials, an installation or procedure. Shall - CORRECT ANSWER Indicates a mandatory requirement....

NFPA 10 Exam 71 Questions with Verified Answers When should wheeled fire extinguishers be considered? - CORRECT ANSWER • High hazard areas are present. • Limited available personnel are present. Requiring: High agent flow rate, Increased agent stream range, increased agent capacity NON-DOT low pressure fire extinguisher cylinders that pass a hydrostatic test shall have the following recorded on a label: - CORRECT ANSWER • Month and year test was performed (perforated) • Test pre...

What is the most reliable method of confirming and montioring correct placement of an ET tube? - Answer- Continuous waveform capnography The upper airway consists of... - Answer- Nose, Mouth, Jaw, Oral Cavity, Pharynx, and Larynx No gas exchange occurs here __________, it's called ____________. - Answer- Nose to terminal bronchioles, anatomical dead space. (2ml/kg of inspired tidal volume) They conduct airflow towards gas exchange units. Crycothyroid membrane - Answer- between thyroid ...

ENGINE REPAIR MICHIGAN MECHANIC STUDY GUIDE RATED A+ WHICH OF THE FOLLOWING IS TRUE ABOUT ADJUSTING VALVE TAPPET CLEARANCE A. THE VALVE TAPPET CLEARENCE ON A HIGH MILEAGE EGINE SHOULD BE ADJUSTED TIGHTER THAN SPECIFICATIONS FOR A NEWLY REBUILT ENGINE. B. VALVE TAPPET CLEARANCE SHOULD BE ADJUSTED AT TDC AT THE END OF THE COMPRESSION STROKE. (CORRECT AWNSER) C. VALVE TAPPET CLEARANCE SHOULD BE ADJUSTED AT BDC AT THE END OF THE EXHAUST STROKE. D. NONE OF THE ABOVE. (NOT CORRECT AWNS...

How can the driver anticipate a change in traffic signals as he approaches an intersection? - Correct Answer Look well ahead for stale green lights, to avoid running through late. If your vehicle is 38 feet in length, what "timed-interval" count would you use under ideal road and traffic conditions? - Correct Answer 4 seconds. Round to nearest 10 feet and divide by 10. What conditions should the driver consider when deciding upon a safe driving speed? - Correct Answer 1. Road condition (...

USPA Skydiving A License Exam Questions With Answers 2023/2024 (Graded). What is the recommended minimum breakoff altitude for free fall groups of five or fewer? 1,500 feet above the highest planned deployment altitude 2. What is the danger of entering a toggle turn too quickly? line twist 3. How can you avoid the propeller(s) while approaching an airplane? approach only from the rear and behind the wing 4. What is the biggest danger of a hard toggle turn near the ground? 1) Line tw...

Sharp ESO 2024 Exam Queations with Answers What mnemonic is used to assess possible causes of PEA? - Answer-H's and T's: Hypovolemia, hypoxia, hydrogen ion (acidosis), hypo/hyperkalemia, hypoglycemia, hypothermia; Toxins, tamponade, thrombosis, trauma, tension pneumothorax What is the recommended oxygen delivery method for PEA? - Answer-O2 at 15L/minute via ambu bag (10 breaths/minute) What medication is administered for PEA? - Answer-Epinephrine 1mg IVP/IO (0.1mg/ml), repeat every 3...

What is the recommended minimum breakoff altitude for free fall groups of five or fewer? - 1,500 feet above the highest planned deployment altitude What is the danger of entering a toggle turn too quickly? - line twist How can you avoid the propeller(s) while approaching an airplane? - approach only from the rear and behind the wing What is the biggest danger of a hard toggle turn near the ground? - 1) Line twist 2) Hard landing while still in a turn 3) Collision with other jumpers Wha...

ICC Codes Exam Questions with Correct A Which of the following publications is most useful for a Special Inspector? - Answer-ACI 318 A is a horizontal member that transfers loads laterally. - Answer-Beam Plain concrete refers to: - Answer-Concrete with less than the minimum amount of reinforcement Answer-Flexure, compression The best place to look up definitions in ACI 318-14 is: - Answer-Chapter 2 Foundations cast at the same elevation as the soil grade are known as: - Answer...

Level ___ PPE should only be used when the atmosphere contains no known hazards and when there is no potential for splashes, immersion, or inhalation of hazardous levels of chemicals. - ANSWER D How would a fuel/air mixture in which there is too much fuel be described? - ANSWER Too rich Master streams flow a minimum of - ANSWER 350 gpm When hoisting a ladder, a ___ line should be attached to the bottom of the ladder to help control it as it is hoisted - ANSWER tag Signs that chemical...