Ndt test 1 - Study guides, Class notes & Summaries

NDT TEST 1 QUESTIONS WITH ANSWERS...

What are two advantages of non-destructive testing  The material tested are not damaged or Destroyed and Most of the equipment available is very portable What is liquid Penetrant testing?  is an NDT method used for location surface discontinuities in a non-porous object What principle enables PT to work?  Capillary force or action, this force causes the liquid to creep and crawl into fine openings All penetrants are?  Oil-Based, oils are used due to their low surface tensi...

When performing a surface inspection on a piece of aluminum for possible cracks, what are the possible NDT methods that should be used to confirm your findings?  Visual and Penetrant Once the surface of the part has been cleaned properly, penetrant can be applied by:  All of the above The most important step in any penetrant type inspection is:  Part preparation and cleaning The most important consideration before performing any NDT test for a commercial airline is:  All of ...

NDT Test 1-Questions with Correct Answers/ Verified/ Latest 2024/2025

Fracture is a type of material failure. Of the following which is another type of material failure? - Answer-Permanent deformation. Which of the following statements best differentiates between a defect and a discontinuity? - Answer-Discontinuities can propagate and become defects. Nondestructive testing is often differentiated from other measurements or inspection techniques in that: - Answer-NDT involves indirect tests related to some other quality or characteristic of material. What are...

What does Method A refer to?  Removal Methods When is an unscheduled inspection performed?  All Of the above The advantage that liquid penetrant testing has over an unaided visual inspection is that:  It makes defects easier to see for the inspector Which of the following is an advantage of Penetrant Testing?  Both A and B. What are the major requirements needed to become qualified in any NDT method?  On the Job Training and Classroom Instruction. What manual reference i...

Weld Inspector Level 1 Exam Questions and Answers | Latest Version | 2024/2025 | Correct & Verified What is the primary responsibility of a weld inspector? A) Fabricating metal components B) Ensuring that welds meet quality standards C) Designing welding procedures D) Supervising all workers on-site Which tool is commonly used to measure weld size? A) Fillet weld gauge B) Caliper C) Spirit level D) Wire brush Why is pre-weld inspection necessary? A) To reduce production t...

ASNT BASIC - Cert/snt/cp | 100% Correct Answers | Verified | Latest 2024 Version For individuals with only a high school education, the number of training hours recommended by SNT- TC-1A: A. should be increased by 25% over the requirements for those with a 4-year technical degree. В. may not be altered from those published. С. may be adjusted to reflect the candidate's actual education level. D. is not applicable to those with education levels of less than a high school equivalent....

Fracture is a type of material failure. Of the following which is another type of material failure? - Permanent deformation. Which of the following statements best differentiates between a defect and a discontinuity? - Discontinuities can propagate and become defects. Nondestructive testing is often differentiated from other measurements or inspection techniques in that: - NDT involves indirect tests related to some other quality or characteristic of material. What are the functions of ...

NPTE Practice Exam 1 Questions with 100% Correct Answers | Verified A physical therapist is treating a 75-year-old female with osteoporosis. Which of the following types of exercise would be MOST appropriate? 1) biking 2) bowling 3) squats 4) swimming - answer3) squats A 63-year-old male patient presents with complaints of burning bilateral leg pain and cramping. The pain improves with rest and worsens with leg elevation and walking more than 10 minutes at a time. His symptoms do not c...