Psi f - Study guides, Class notes & Summaries

NFPA 10 Exam 99 Questions with Verified Answers (SI) - CORRECT ANSWER International System of Units 1 in=. mm - CORRECT ANSWER 25.4 Approved - CORRECT ANSWER Acceptable to the authority having jurisdiction. (AHJ) - CORRECT ANSWER Authority Having Jurisdiction O rganization, office or individual responsible for enforcing requirements of a code or standard, or for approving equipment, materials, an installation or procedure. Shall - CORRECT ANSWER Indicates a mandatory requirement....

Nicet Level 1 - Water Based Layout Practice Questions and Answers 100% Pass Toggle hangers shall be permitted only for the support of pipe __________ inches or smaller in size under ceilings of hollow tile or metal lath and plaster. - Answer-1 2/2 in. (ref. NFPA 13 2016 Sec. 9.2.1.1.2. While conducting a flow test, the chosen hydrant should be ______ - Answer-As close to the property where the sprinkler system is being installed. (Ref, NFPA 13 Sec. A.24.2.2. or NFPA 291) What formula is ...

P-99 / Low PSI Oil Burner Operator Questions and Answers 100% Solved All heating, combustion, and cooking equipment shall be provided with insulation or the building construction shall be fire protected, so that during operation the surface of combustible construction materials will not be raised to a temperature higher than ____. 170 ̊F Acceptance tests: Boilers shall not be placed in operation upon completion of construction until they have been ____ and an equipment use permit has ...

Louisiana Property & Casualty Exam - PSI & ExamFX Questions and Answers 100% CorrectLouisiana Property & Casualty Exam - PSI & ExamFX Questions and Answers 100% CorrectLouisiana Property & Casualty Exam - PSI & ExamFX Questions and Answers 100% Correct If a producer allows his license to lapse, within what time period may the producer reinstate the same license? - ANSWER-b) 2 years Producers who allow their license to lapse may reinstate them same license within 2 years, upon proof of fulfil...

D - correct answer Ground reservoirs are man-made impoundments that have the same characteristics of a pond or small lake. They are most commonly found at: A. Commercial properties B. Industrial properties C. Municipal water treatment facilities D. All of the above C - correct answer Pump piping on fire apparatus must be able to withstand hydrostatic test pressures of: A. 100 psi B. 250 psi C. 500 psi D. 750 psi B - correct answer NFPA 1901 brake test requires that new fire app...

PE 4th Part A ABSA Test Bank Questions With Complete Solutions Graded To Pass!! Introduction to Power Engineering Which of the following is not a definition of a power plant? a) Any one or more boilers in which steam or other vapour is generated at more than 103 kPa (15 psi). b) Any one or more boilers containing liquid and having a working pressure exceeding 1100 kPa (160 psi). c) Any one or more boilers containing liquid and having a working temperature exceeding 121 degrees Cel...

PE 4th Part A ABSA Test Bank Questions With Complete Solutions Graded To Pass!! Introduction to Power Engineering Which of the following is not a definition of a power plant? a) Any one or more boilers in which steam or other vapour is generated at more than 103 kPa (15 psi). b) Any one or more boilers containing liquid and having a working pressure exceeding 1100 kPa (160 psi). c) Any one or more boilers containing liquid and having a working temperature exceeding 121 degrees Cel...

PSI FNP Practice Exam 2024 Practice Latest 20242025 Questions and Answers

Polyethylene What is the most often used material for potable water system tanks? 1. Copper Alloys (incl. bronze, brass and nickel-copper) 2. AISI Type 300 series stainless steel 3. Glass-lined metal 4. FDA approved plastic 5. FDA approved rubber Name 5 materials allowable for contact use in potable water systems: Siphon Break What device can be used to separate potable water from other water systems? Accumulator Tank, after pump/filter and before check-valve What is the device used t...

Clean Agent ANS: - Electrically non-conducting, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. High-Pressure Cylinder ANS: - containing nitrogen, compressed air, carbon dioxide, or other gases at a pressure higher than 500 psi (3447 kPa) at 70°F (21°C). Low-Pressure Cylinder ANS: - containing fire- extinguishing agent (medium), nitrogen, compressed air, or other compressed gases at a service pressure of 500 psi (3447 kPa) or lower at 70°...