Steam pressure gauge Study guides, Class notes & Summaries

MN Boiler License Questions With Complete Solutions Graded A+ a question an answer what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's c) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high a) Necessary to burn the combustible gases when ...

MN State Special Boiler License Advanced Study Guide 2024. ASME - correct answer American Society of Mechanical Engineers NBIC - correct answer National Board Inspection Code A high-pressure steam boiler is required to have ______ valves on the main steam line. - correct answer 2 10 square feet is equivalent to _____ boiler horsepower for conventional boilers - correct answer 1 Minimum size pipe to be used to connect a water column to high pressure boilers - correct answer 1 inch ...

_________ are necessary for complete combustion correct answer: time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ correct answer: 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi correct answer: 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator correct answer: steam turbine a boiler is produci...

_________ are necessary for complete combustion correct answer: time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ correct answer: 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi correct answer: 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator correct answer: steam turbine a boiler is produci...

_________ are necessary for complete combustion correct answer: time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ correct answer: 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi correct answer: 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator correct answer: steam turbine a b...

Minnesota Special Engineer Boiler License Exam Prep (2023/2024 Update) | Questions and Verified Answers| 100% Correct Q: A feed water line must have what two valves? Answer: Check & stop Q: After a new boiler is installed, what must be performed? Answer: Hydrostatic test Q: All stationary boilers of what pressure must have 2 valves on the blow off line? Answer: 100psi Q: How is boiler efficiency calculated? Answer: Output divided by input Q:...

What is the first thing a tech should do when arriving at a no combustion call? - Answer- Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answe...

For the purpose of rating boiler horsepower for an Engineers License only, how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler? CORRECT ANSWER 10 Sq. Ft. Heating Surface What is meant by the term "Low Pressure Boiler"? CORRECT ANSWER Boilers operating at a steam or other vapor pressure of 15psig or less, or a hot water or other liquid boiler in which the pressure does not exceed 160 psig or a temperature of 250 degrees F. A person holding a cur...

the process by which all forms of microbial life, including spores, are destroyed is the definition of a. sanitization b. disinfection c. decontamination d. sterilization - d. sterilization In a non table top sterilizer, a gauge on the main steam line, usually located at the back of the sterilizer, tells you the steam pressure a. inside the jacket b. inside the chamber c. as steam is entering the jacket d. as steam is exitiing the chamber - a. inside the jacket which ...

Z-51 Written Exam Questions and Complete Solutions In a steam turbine, what is the function of a Kingsbury thrust bearing? A) Maintain first stage steam pressure. B) Compensate for coupling misalignment. C) Adjust shaft torque at start up. D) Maintain axial positioning of the rotor shaft. - Answer: D) Maintain axial positioning of the rotor shaft. The ratio of actual pressure of water pressure in the atmosphere to the saturated pressure of given temperature is A) partial pressure....