Stiffness in steel is a - Study guides, Class notes & Summaries

Module 0103-15 Introductions to hand tools Questions and Answers 100% Pass Another name for a machinist's hammer is A. Ball-peen hammer B. Claw hammer C. Veneer hammer D. Sledgehammer - Answer- A. Ball-peen hammer A heavy-duty tool used to drive posts or other large stakes is a A. Mallet B. Sledgehammer C. Bell-faced hammer D. Ball-peen hammer - Answer- B. Sledgehammer The proper angle for the edges of a cold chisel is A. 90 degrees B. 60 degrees C. 45 degrees D. 30 degrees - Ans...

Fracture is a type of material failure. Of the following which is another type of material failure? - Permanent deformation. Which of the following statements best differentiates between a defect and a discontinuity? - Discontinuities can propagate and become defects. Nondestructive testing is often differentiated from other measurements or inspection techniques in that: - NDT involves indirect tests related to some other quality or characteristic of material. What are the functions of ...

NCCER Core Module 3 Exam Questions and Answers (Verified Solutions) Another name for a machinist hammer is a Ans Ball-peen hammer A heavy duty tool used to drive post or other large stakes is a Ans Sledge hammer The proper angle for the edge of a cold chisel Ans 60 degrees A Reed and Prince screw comes to a relatively sharp point at Ans the base of it's drive socket When an object is plumb it is Ans perfectly vertical One situation that can make a measurement with a laser i...

AIC Exam Practice & All Possible Questions and Answers Updated ;All solutions solved and verified by AIC Experts 100% Guaranteed Success(OVER 300 QUESTIONS AND ANSWERS) Which of the following documents is utilized for correspondence between the A/E or Owner and the Contractor? Answer - Formal Business Letter Which of the following documents is used for correspondence between the home office and the job site? Answer - Memorandum What is the best time to distribute the Working Agenda ...

Orthodontic assistant FINAL EXAM Questions with Complete Solutions The following orthodontic appliance is best used to correct a patient with a -3mm overjet in a 8 year old boy Reverse pull headgear (facemask) The following orthodontic appliance is best used to achieve absolute anchorage so there is no reciprocal movement? TADS This type of elastic provides the least force 5/16 4.5oz Class II elastics are places by connecting the elastics to which teeth? Upper 3's to Lower 6's ...

NCCER Module 3 (Hand Tools) Questions and Answers Graded A another name for a machinist's hammer Ans ball-peen hammer a heavy-duty tool used to drive posts or other large stakes Ans sledge hammer the proper angle for the edge of a cold chisel Ans 60 degree angle A screw that comes to a relatively sharp point at the base of its drive socket Ans reed and prince number of sides of a hexagonal shape Ans six How is a spud wrench different from a pipe wrench Ans smooth jaws t...

What is the cause for weld bead cracking in Al ? - ANS ------Hot shortness of Al What are the properties of Al ? - ANS ------1. low density 2. Corrosion resistance 3. High electrical resistance 4. High thermal conductivity 5. good appearance 6. toughness at low temps True / False ? Al is covered with a coherent oxide. - ANS ------True Thermal conductivity of Al is _______ times that of Steel - ANS ------4 Melting point of Al is about _______ of Steel - A...

Rebar correct answers A steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in tension Rebar correct answers Its surface is often patterned to form a better bond with the concrete Rebar correct answers It is the excellent partner of concrete in resisting both tension and compression Rebar correct answers Relatively ten times stronger than concrete in resisting compression load and hundred ...

Core Curriculum- Chapter 3 Hand Tools Exam Questions And Answers Updated 2024/2025 Which of the following would likely have the fewest teeth per inch, resulting in the largest teeth? Rip saw Using an adjustable wrench can save time when you are working with Different size nuts and bolts Before using a pick, check to be sure that the head is Fixed firmly to the handle When an object is plumb, it is _______________________ Horizontal Because of its stiffness, a folding rul...

Another name for a machinist hammer is a - Ball-peen hammer A heavy duty tool used to drive post or other large stakes is a - Sledge hammer The proper angle for the edge of a cold chisel - 60 degrees A Reed and Prince screw comes to a relatively sharp point at - the base of it's drive socket When an object is plumb it is - perfectly vertical One situation that can make a measurement with a laser inaccurate is - Measuring to a highly reflective surface. Because of its stiffness, a folding...