The boiler operator must - Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

P-99 / Low PSI Oil Burner Operator Questions and Answers 100% Solved All heating, combustion, and cooking equipment shall be provided with insulation or the building construction shall be fire protected, so that during operation the surface of combustible construction materials will not be raised to a temperature higher than ____. 170 ̊F Acceptance tests: Boilers shall not be placed in operation upon completion of construction until they have been ____ and an equipment use permit has ...

Minnesota Special Engineer Boiler License Exam Prep (2023/2024 Update) | Questions and Verified Answers| 100% Correct Q: A feed water line must have what two valves? Answer: Check & stop Q: After a new boiler is installed, what must be performed? Answer: Hydrostatic test Q: All stationary boilers of what pressure must have 2 valves on the blow off line? Answer: 100psi Q: How is boiler efficiency calculated? Answer: Output divided by input Q:...

For the purpose of rating boiler horsepower for an Engineers License only, how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler? - ANSWER 10 Sq. Ft. Heating Surface What is meant by the term "Low Pressure Boiler"? - ANSWER Boilers operating at a steam or other vapor pressure of 15psig or less, or a hot water or other liquid boiler in which the pressure does not exceed 160 psig or a temperature of 250 degrees F. A person holding a current State ...

for the purpose of rating boiler horsepower for an Engineers licence only, how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler? correct answer: 10 Sq. Ft. Heating Surface What is meant by the term Low Pressure Boiler? correct answer: boilers operating at a steam or other vapor pressure of 15 psig. or less, or a hot water or other liquid boiler in which the pressure does not exceed 160 psig. Or a temperature of 250 f°. A person holding a curren...

P-99 / Low PSI Oil Burner Operator Questions With 100%Verified Answers A+GRADED All heating, combustion, and cooking equipment shall be provided with insulation or the building construction shall be fire protected, so that during operation the surface of combustible construction materials will not be raised to a temperature higher than ____. - correct answer...170 ̊ F Acceptance tests: Boilers shall not be placed in operation upon completion of construction until they have been ____ and a...

For the purpose of rating boiler horsepower for an Engineers License only, how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler? CORRECT ANSWER 10 Sq. Ft. Heating Surface What is meant by the term "Low Pressure Boiler"? CORRECT ANSWER Boilers operating at a steam or other vapor pressure of 15psig or less, or a hot water or other liquid boiler in which the pressure does not exceed 160 psig or a temperature of 250 degrees F. A person holding a cur...

Boiler Operator Licensing Exam Questions and Answers Graded A+ all steam boilers must have 1 or more safety valves before anyone enters the boiler drum, the main steam stop valve, bottom blowdown valves, & feedwater valves should be Locked closed at atmospheric pressure, water begins to boil at approximately 212 degrees F fuels most commonly used in boilers Fuel oil, gas, & coal must be connected to the highest part of the steam side of the boiler Steam pressure gauge with an...

Stationary Engineer Exam Questions With Correct Answers Latest (GRADED A+) On a gas fired boiler what is the proper gas to air mixture - Answer 30%-70% and in special arrangements it can be as high as 100% . ANSWER CHAPTER 11 remember% What is the total hardness in a system that was found to have calcium hardness of 60ppm and magnesium hardness of 18ppm and carbon hardness of 12 ppm? - Answer TH=(Ca x 2.5) + (Mg x 4.1)nTH=(60 x 2.5) + (18 x 4.1)nTH= 150+73.8 =( 223.8 PPM) How often s...

Ohio stationary steam engineer questions and answers already passed Combustion efficiency may be increased by_____ the primary air Preheating What is the purpose of cinder reinjection? increase efficiency 2 forces of equal intensity acting in opposite directions is? tension What is true about the dew poimt of flue gasses dew point is the temp at which the gasses will condense What will not cause high stack temps? plugged dry pipe What is true about smoke smoke consists of unb...