What does condenser do - Study guides, Class notes & Summaries

2024 update DC Third testing Questions and Answers 100% Pass The component in which liquid vapor by absorbing heat is called? - Correct Answer ️️ - Evaporator Select the best answer electrical grounding method? - Correct Answer ️️ -Metal stake drive 8 foot into the ground. A _____ valve should be used for throttling purpose? - Correct Answer ️️ -Globe What is the acceptable range for residual sodium sulfite in the boiler maintain? - Correct Answer ️️ -30-70 What is the B...

HVAC BOMA 501 Study Guide Latest Update Graded A+ Dual Duct System A system in which hot air and cold air are supplied by separate ducts and mixed at each controlled space to provide the desired supply air temperature. This method consumes a great deal of energy. Muiltizone System an a/c system in which the zone control is obtained by mixing hot and cold air at the unit in response to a room thermostat Load Calulations take the sensible heat and the latent heat into consideration which o...

HVAC: EPA 608 Certification Study Guide Questions and Answers | Latest Version | 2024/2025 | Rated A+ Are there alternative refrigerants that can be directly used in systems originally designed for R- 12? Why or why not? No, because these new refrigerants are not compatible with the lubricants and oils used in R- 12 systems. Explanation: The oils and lubricants in R-12 systems cannot properly interact with newer refrigerants, making direct replacements unfeasible. What type of o...

HVAC (EPA Certification Exam Section 608) Questions With Verified Solutions | ALREADY PASSED | LATEST REVISED UPDATE What does a metering device do? - ANSWER The metering device causes a reduction in pressure, and therefore a reduction in saturation temperature. What is absorbed in the evaporator? - ANSWER Heat is absorbed in the evaporator. What happens in the evaporator? - ANSWER Heat is absorbed in the evaporator and causes the refrigerant to boil from liquid to vapor. At...

Z-51 Written Exam Questions and Complete Solutions In a steam turbine, what is the function of a Kingsbury thrust bearing? A) Maintain first stage steam pressure. B) Compensate for coupling misalignment. C) Adjust shaft torque at start up. D) Maintain axial positioning of the rotor shaft. - Answer: D) Maintain axial positioning of the rotor shaft. The ratio of actual pressure of water pressure in the atmosphere to the saturated pressure of given temperature is A) partial pressure....

When using a dynamic schedule and the energy profile in an hour is >250 MW and the actual hourly integration deviates from the hourly energy profile by ____ the tag must be modified. A. 100 MW B. 10% C. 50 MW D. 25% B. 10% Dry steam plants, flash steam plants, and binary cycle power plants are the three main types of what kind of generating plant? A. Nuclear generators B. Combustion turbine generators C. Geothermal generators D. Hydroelectric generators C. Geothermal generators...

BIOD 171 Portage Learning Final EXAM Questions and Answers 100%Correct/Exam 1-7 2023/2024 UpdatePortage Learning BIOD 171 Final EXAM Questions and Answers 100%Correct/Exam 1-7 2023/2024 Update True or False: A virus is considered a microorganism. False. Viruses are not living and as such are not considered microorganisms. Viruses can, however, be classified as microbes, a more general term that includes microorganisms and viruses. 1. What is the smallest biological unit of life? A cell. ...

Practicals Chemistry AQA A-level Rated A+ Required Practical 1 - titration and making a standard solution Making a standard solution 1. weigh the required mass of solid using a sample bottle on a 2 dp balance. 2. transfer the solid into a beaker using distilled water to wash it out- preventing any solid remaining in the sample bottle. 3. reweigh the sample bottle and work out the difference. 4. Add 100cm3 of distilled water to the beaker to dissolve the solid (small volume of water) using a...

Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed Document Content and Description Below Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed The inspector is not required to determine ____ ___ of any system or component. -Years of age -Life expecta ncy -Make model Horizontal waste pipe should slope ____ inch per foot 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed Also called weep screed. U...

EPA 608 Type 3 Questions and Answers Already Passed On low pressure chillers, moisture typically enters the refrigerant system through air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller ... A hydrostatic tube test kit is used to: determine if a tube leaks Commercial and industrial process refrigeration systems must be rep...