Which is equal to 22 psig - Study guides, Class notes & Summaries

EPA SECTION 608 CORE (2021-2022 revision) A disposable cylinder should be reduced to what pressure before scrapping? a. 0 psig b. 20 psig c. 50 psig d. 80 psig A major system repair is being performed on a R-22 appliance. What CANNOT be done to recharge the appliance? a. Add R-22 after the repair is complete. b. Retrofit the unit to R-407C. c. Use recovered or recycled R-22 from the same owner. d. Top off the unit with R-410a. A refillable cylinder must not be filled above what ...

EPA 608 Practice exam type 1 solved correctly The sale of reclaimed CFC, HCFC, HFC, and HFO refrigerants is_______. Restricted to technicians who are EPA certified and refrigerant recovery A small Pliance is defined as a system that is Manufactured, fully charged, and hermetically sealed in a factory with a charge of 5 pounds or less A __________ recovery device can be use for type 1 small appliance applications or type 2 applications if the total charge is below 15 pounds. System dependent Y...

Reta Caro Study Guide JH Exam Questions With Verified Solutions Which is equal to 22 Psig? 36.7 Psia What is the Latent Heat of Vaporization?(H2O) 970 Btu's What product requires the most energy to lower 1 lb. by 1 degree? water What happens when pressure on a liquid is increased? Boiling point goes up/Saturation temp. goes up What happens when vapor is Superheated? Temperature above saturated/it gains sensible heat 0.5x1 degree F What causes heat to move from one...

Reta Caro Study Guide JH Exam Questions With Verified Solutions Which is equal to 22 Psig? 36.7 Psia What is the Latent Heat of Vaporization?(H2O) 970 Btu's What product requires the most energy to lower 1 lb. by 1 degree? water What happens when pressure on a liquid is increased? Boiling point goes up/Saturation temp. goes up What happens when vapor is Superheated? Temperature above saturated/it gains sensible heat 0.5x1 degree F What causes heat to move from one...

Reta Caro Study Guide JH Exam Questions With Verified Solutions Which is equal to 22 Psig? 36.7 Psia What is the Latent Heat of Vaporization?(H2O) 970 Btu's What product requires the most energy to lower 1 lb. by 1 degree? water What happens when pressure on a liquid is increased? Boiling point goes up/Saturation temp. goes up What happens when vapor is Superheated? Temperature above saturated/it gains sensible heat 0.5x1 degree F What causes heat to move from one...

API 570 test 100% Correctly Solved Section 1 - Scope 1-Which of the following activities is NOT included in the scope of API 570? - Answer- Operating a pipe system 2-Which of the following activities is NOT included in the scope of API 570? - Answer- Performing pipe fabrication 3-API 570 pertains to: - Answer- Only to metallic and FRP pipe 4-API 570 pertains only to: - Answer- Pipe and their associated relief devices 5-The inspector discovers a problem on a pipe that requires corrective ...

A system is supplied from the factory with charge of 5 pounds 10 ounces for a 15 foot line set. The line set is 25 feet long. The manufacturer's instruction sheet specifies 0.6 ounces of refrigeration to be added for each added foot of refrigerant line set length. What is the total refrigerant charge for the system? A. 6 ounces B. 5 pounds C. 5 pounds 10 ounces D. 6 pounds - D. 6 pounds 15ft - 25ft = 10ft x .6 = 6 ounces 5 pounds + 10 ounces + 6 ounces 5 pounds + 16 ounces = 6 pound...

NATE AC Service Certification exam with correct answers 2024 update A system is supplied from the factory with charge of 5 pounds 10 ounces for a 15 foot line set. The line set is 25 feet long. The manufacturer's instruction sheet specifies 0.6 ounces of refrigeration to be added for each added foot of refrigerant line set length. What is the total refrigerant charge for the system? A. 6 ounces B. 5 pounds C. 5 pounds 10 ounces D. 6 pounds - answer The purpo...

On low pressure chillers, moisture typically enters the refrigerant system through - Answer- air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: - Answer- 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller - Answer- ... A hydrostatic tube test kit is used to: - Answer- determine if a tube leaks Commercial and industrial process refrigeration systems must be repaire...

A __________ recovery device can be use for type 1 small appliance applications or type 2 applications if the total charge is below 15 pounds. - System dependent Always _____________ when connecting or disconnecting refrigeration hoses. - 1.) wear safety eyewear and butyl-lined gloves 2.) verify the hoses are rated for the refrigerant being used 3.) avoid trapping liquid refrigerant in the hoses To reach the necessary recovery level, when using a ________, it will most likely be essential t...