Voordeelbundel
Millwright exam bundle questions and answers GRADED A
Millwright exam bundle questions and answers GRADED A
[Meer zien]29 items
Millwright Exam Prep Questions and Answers 100% Correct.
$11.09
1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - ANSWER-A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and expres...
Bekijk voorbeeld
Voorbeeld 2 van de 7 pagina's
In winkelwagen1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - ANSWER-A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and expres...
$11.09
In winkelwagen
Millwright Exam 1 100qs with Complete Solutions.
$10.99
Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - ANSWER-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - ANSWER-...
Bekijk voorbeeld
Voorbeeld 2 van de 10 pagina's
In winkelwagenCompared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - ANSWER-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - ANSWER-...
$10.99
In winkelwagen
Millwright Level 1 Final Questions & Answers (Graded A)
$10.99
On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER-1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER-aluminum oxide A blotter is used on a grinding wheel to: - ANSWER-protect the flanges...
Bekijk voorbeeld
Voorbeeld 3 van de 21 pagina's
In winkelwagenOn a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER-1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER-aluminum oxide A blotter is used on a grinding wheel to: - ANSWER-protect the flanges...
$10.99
In winkelwagen
NCCER MILLWRIGHT PRACTICE EXAM 2 QUESTIONS & ANSWERS 100% ACCURATE
$10.99
1x verkocht
unusual - ANSWER-If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife - ANSWER-For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on th...
Bekijk voorbeeld
Voorbeeld 2 van de 9 pagina's
In winkelwagenunusual - ANSWER-If the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife - ANSWER-For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on th...
$10.99
In winkelwagen
Millwright Level One (Orientation to the Trade) Questions and Answers 100% Correct.
$10.99
NCCER was created to - ANSWER-Award a college degree for completion of the NCCER Standardized Curricula The purpose of NCCER's Registry is to. - ANSWER-Provide industry-wide credential and assure national portability of skills. Two of the more important traits of the professional Millwright a...
Bekijk voorbeeld
Voorbeeld 1 van de 2 pagina's
In winkelwagenNCCER was created to - ANSWER-Award a college degree for completion of the NCCER Standardized Curricula The purpose of NCCER's Registry is to. - ANSWER-Provide industry-wide credential and assure national portability of skills. Two of the more important traits of the professional Millwright a...
$10.99
In winkelwagen
Intro to Millwright Questions and Answers 100% Correct.
$10.99
A millwright is a tradesperson who build, installs, and maintains machinery. - ANSWER-True ____________________ is the process of reducing and shaping materials using power tools. - ANSWER-Machining Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. - A...
Bekijk voorbeeld
Voorbeeld 3 van de 16 pagina's
In winkelwagenA millwright is a tradesperson who build, installs, and maintains machinery. - ANSWER-True ____________________ is the process of reducing and shaping materials using power tools. - ANSWER-Machining Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. - A...
$10.99
In winkelwagen
Millwright Exam Prep Questions and Answers 100% Correct
$10.99
1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - ANSWER-A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and expres...
Bekijk voorbeeld
Voorbeeld 2 van de 7 pagina's
In winkelwagen1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - ANSWER-A. 160 x/12.56 sq in = 100 lbs/7.85 sq in x = (100lbs/7.85 sq in)12.56 x = 160 lbs 2. Add the following decimals and expres...
$10.99
In winkelwagen
Millwright Exam 1 100qs with Complete Solutions
$10.99
Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - ANSWER-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - ANSWER-...
Bekijk voorbeeld
Voorbeeld 2 van de 10 pagina's
In winkelwagenCompared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - ANSWER-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - ANSWER-...
$10.99
In winkelwagen
Millwright Level 1 Final Questions & Answers. (Graded A)
$10.99
On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER-1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER-aluminum oxide A blotter is used on a grinding wheel to: - ANSWER-protect the flanges...
Bekijk voorbeeld
Voorbeeld 3 van de 21 pagina's
In winkelwagenOn a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - ANSWER-1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - ANSWER-aluminum oxide A blotter is used on a grinding wheel to: - ANSWER-protect the flanges...
$10.99
In winkelwagen
Millwright Level One (Orientation to the Trade) Questions & Answers 100% Correct.
$10.99
NCCER was created to - ANSWER-Award a college degree for completion of the NCCER Standardized Curricula The purpose of NCCER's Registry is to. - ANSWER-Provide industry-wide credential and assure national portability of skills. Two of the more important traits of the professional Millwright a...
Bekijk voorbeeld
Voorbeeld 1 van de 2 pagina's
In winkelwagenNCCER was created to - ANSWER-Award a college degree for completion of the NCCER Standardized Curricula The purpose of NCCER's Registry is to. - ANSWER-Provide industry-wide credential and assure national portability of skills. Two of the more important traits of the professional Millwright a...
$10.99
In winkelwagen
Intro to Millwright Questions and Answers 100% Correct
$10.99
A millwright is a tradesperson who build, installs, and maintains machinery. - ANSWER-True ____________________ is the process of reducing and shaping materials using power tools. - ANSWER-Machining Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. - A...
Bekijk voorbeeld
Voorbeeld 3 van de 16 pagina's
In winkelwagenA millwright is a tradesperson who build, installs, and maintains machinery. - ANSWER-True ____________________ is the process of reducing and shaping materials using power tools. - ANSWER-Machining Pharmaceuticals and aerospace are examples of two industries in which UBC millwrights work. - A...
$10.99
In winkelwagen
Millwright Exam Prep Questions and Answers 100% Correct.
$10.99
1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - ANSWER-A. 160
Bekijk voorbeeld
Voorbeeld 2 van de 7 pagina's
In winkelwagen1. When the downward force at C2 is 100 lb and D2 = 2.5 inches, the upward force at C1 will be ________lb if D1 = 4 inches. A. 160 B. 256 C. 384 D. 240 - ANSWER-A. 160
$10.99
In winkelwagen
Millwright Exam 1 100qs with Complete Solutions
$10.99
Compared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - ANSWER-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - ANSWER-...
Bekijk voorbeeld
Voorbeeld 2 van de 10 pagina's
In winkelwagenCompared to fibre core, IWRC tends to be _______ resilient and less capable of absorbing shock loads a. more b. less c. equally d. slightly more - ANSWER-b. less What rope is considered to be a standard wire a. Lang lay b. right regular lay c. left regular lay d. performing lay - ANSWER-...
$10.99
In winkelwagen
Millwright level one (Hand Tools) Questions and Answers 100% Correct.
$10.99
which of the following tools would be used on a polished steel assembly. - ANSWER-strap wrench The type of wrench designed for use on a specific part is the ______ wrench. - ANSWER-Spanner what kind of tool do you use for packing. - ANSWER-Packing gauge Can you use a Tubing Cutters tool to ...
Bekijk voorbeeld
Voorbeeld 1 van de 2 pagina's
In winkelwagenwhich of the following tools would be used on a polished steel assembly. - ANSWER-strap wrench The type of wrench designed for use on a specific part is the ______ wrench. - ANSWER-Spanner what kind of tool do you use for packing. - ANSWER-Packing gauge Can you use a Tubing Cutters tool to ...
$10.99
In winkelwagen
Millwright – Safety Questions and Answers 100% Accurate.
$10.99
What is the fire triangle? a. Wood, coal, combustibles b. Heat, fuel, oxygen c. Class A, B, C d. Green triangle, blue circle, red square - ANSWER-b. Heat, fuel, oxygen Whose responsibility is it for you to wear Protective equipment in good order? a. Your own b. Plant manager c. Manufac...
Bekijk voorbeeld
Voorbeeld 1 van de 4 pagina's
In winkelwagenWhat is the fire triangle? a. Wood, coal, combustibles b. Heat, fuel, oxygen c. Class A, B, C d. Green triangle, blue circle, red square - ANSWER-b. Heat, fuel, oxygen Whose responsibility is it for you to wear Protective equipment in good order? a. Your own b. Plant manager c. Manufac...
$10.99
In winkelwagen
Millwright Rigging & Lifting Exam Questions and Answers 100% Accurate.
$10.99
The breaking strength of rope is a. force needed to pull rope b. force needed to tear rope c. force needed to break the rope d. force needed to stretch rope - ANSWER-c. force needed to break the rope
Bekijk voorbeeld
Voorbeeld 2 van de 13 pagina's
In winkelwagenThe breaking strength of rope is a. force needed to pull rope b. force needed to tear rope c. force needed to break the rope d. force needed to stretch rope - ANSWER-c. force needed to break the rope
$10.99
In winkelwagen
Millwright Hand Tools Level 1 Questions and Answers. (Graded A)
$10.99
chain wrench - ANSWER-used when working on a pipe that is too close to a wall handle pipes up to 18in in diameter strap wrench - ANSWER-go up to 12in used on pipe or round material does not mar Spanner Wrench - ANSWER-made for specific purposes usually furnished with the tool taper gau...
Bekijk voorbeeld
Voorbeeld 1 van de 3 pagina's
In winkelwagenchain wrench - ANSWER-used when working on a pipe that is too close to a wall handle pipes up to 18in in diameter strap wrench - ANSWER-go up to 12in used on pipe or round material does not mar Spanner Wrench - ANSWER-made for specific purposes usually furnished with the tool taper gau...
$10.99
In winkelwagen
Millwright – Hydraulics Questions and Answers 100% Correct.
$10.99
What is pressure defined as? - ANSWER-Force per unit area F=(P)(A) What is the pressure of the Earth's atmosphere at sea level? - ANSWER-14.7 psi How is power defined? A. The rate or velocity at which power is done B. The rate or velocity at which work is created C. The speed of the veloci...
Bekijk voorbeeld
Voorbeeld 2 van de 8 pagina's
In winkelwagenWhat is pressure defined as? - ANSWER-Force per unit area F=(P)(A) What is the pressure of the Earth's atmosphere at sea level? - ANSWER-14.7 psi How is power defined? A. The rate or velocity at which power is done B. The rate or velocity at which work is created C. The speed of the veloci...
$10.99
In winkelwagen
Millwright - Rigging and Hoisting Questions and Answers 100% Correct.
$10.99
1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to retain 250lbs? a. 50 lbs b. 100 lbs c. 250 lbs d. 75 lbs - ANSWER-a. 50 lbs 250lbs/5 = 50 lbs 2. What diameter rope is needed to support two tons using a vertical lift? a. ½" b. ¾" c...
Bekijk voorbeeld
Voorbeeld 2 van de 9 pagina's
In winkelwagen1. Of a block and tackle with five rope falls and minimum friction, how much force is needed to retain 250lbs? a. 50 lbs b. 100 lbs c. 250 lbs d. 75 lbs - ANSWER-a. 50 lbs 250lbs/5 = 50 lbs 2. What diameter rope is needed to support two tons using a vertical lift? a. ½" b. ¾" c...
$10.99
In winkelwagen
Questions Millwright Book 3 (complete) with 100% Correct Answers.
$10.99
The fraction equivalent of 6.125 is _________. - ANSWER-6 1/8 (p. 1.3/Table 1) The decimal equivalent of 9/16 inch is ________. - ANSWER-.05625 (p. 1.3/Table 1) One atmosphere equals ________ pounds per square inch. - ANSWER-14.696 (p. 1.5/Table 3) If the opposite side in Figure 1 is 4 feet...
Bekijk voorbeeld
Voorbeeld 2 van de 13 pagina's
In winkelwagenThe fraction equivalent of 6.125 is _________. - ANSWER-6 1/8 (p. 1.3/Table 1) The decimal equivalent of 9/16 inch is ________. - ANSWER-.05625 (p. 1.3/Table 1) One atmosphere equals ________ pounds per square inch. - ANSWER-14.696 (p. 1.5/Table 3) If the opposite side in Figure 1 is 4 feet...
$10.99
In winkelwagen
Millwright Level 4 Practice Test Review Questions and Answers 100% Correct.
$10.99
The best method of alignment to apply when shafts can not be axially secured is? - ANSWER-cross dialing Sag corrections in dial setting are applied only to? - ANSWER-vertical rim readings limitations in use of cross dialing methods include substantial brackets for long spans, less accuracy ove...
Bekijk voorbeeld
Voorbeeld 2 van de 15 pagina's
In winkelwagenThe best method of alignment to apply when shafts can not be axially secured is? - ANSWER-cross dialing Sag corrections in dial setting are applied only to? - ANSWER-vertical rim readings limitations in use of cross dialing methods include substantial brackets for long spans, less accuracy ove...
$10.99
In winkelwagen
Millwright-Preventive and Predictive Maintenance Questions & Answers 100% Accurate
$10.99
Preventive maintenance - ANSWER-is the periodic inspection and maintenance of plant assets and equipment to uncover conditions that may to equipment failure or shortened life This measures the amount of contaminants per litre of fluid. a. ferromagnetic analysis b. total base number c. infrared...
Bekijk voorbeeld
Voorbeeld 2 van de 9 pagina's
In winkelwagenPreventive maintenance - ANSWER-is the periodic inspection and maintenance of plant assets and equipment to uncover conditions that may to equipment failure or shortened life This measures the amount of contaminants per litre of fluid. a. ferromagnetic analysis b. total base number c. infrared...
$10.99
In winkelwagen
Millwright Level 2 Rigging Questions and Answers 100% Correct.
$10.89
saddle - ANSWER-the safe working load of a rigging hook is accurate only when the load is suspended from the ______________ of the hook 15 - ANSWER-OSHA requires that a hook be replaced if the throat has opened _____ percent or more from it's original size. 40 - ANSWER-A hook that is point lo...
Bekijk voorbeeld
Voorbeeld 1 van de 4 pagina's
In winkelwagensaddle - ANSWER-the safe working load of a rigging hook is accurate only when the load is suspended from the ______________ of the hook 15 - ANSWER-OSHA requires that a hook be replaced if the throat has opened _____ percent or more from it's original size. 40 - ANSWER-A hook that is point lo...
$10.89
In winkelwagen
Millwright - Power Transmission Questions and Answers 100% Correct.
$10.89
1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" - ANSWER-a. 62.65" L=2C+1.57(D1+d2)+[(D1-d2)²/4C] L=2(17.5)+1.57(11.25+6.125)...
Bekijk voorbeeld
Voorbeeld 3 van de 22 pagina's
In winkelwagen1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" - ANSWER-a. 62.65" L=2C+1.57(D1+d2)+[(D1-d2)²/4C] L=2(17.5)+1.57(11.25+6.125)...
$10.89
In winkelwagen
Millwright Level 2 – Bearings Questions and Answers 100% Accurate.
$10.89
What are the principle parts of a friction bearing housing? - ANSWER-Base, Base bolt slots, cap and cap bolt holes. What are friction bearing housings made from adn what factors influence the choice of housing? - ANSWER-Cast Iron, Cast Steel, Fabricated Steel. Choice depends on the Load, The Rot...
Bekijk voorbeeld
Voorbeeld 2 van de 7 pagina's
In winkelwagenWhat are the principle parts of a friction bearing housing? - ANSWER-Base, Base bolt slots, cap and cap bolt holes. What are friction bearing housings made from adn what factors influence the choice of housing? - ANSWER-Cast Iron, Cast Steel, Fabricated Steel. Choice depends on the Load, The Rot...
$10.89
In winkelwagen
Millwright – Lubrication Questions and Answers 100% Correct.
$10.89
1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid - ANSWER-b. Extreme pressure lubricant 2. The most common measurement of kinematic viscosity is what? a. Viscosity b. Centistok...
Bekijk voorbeeld
Voorbeeld 1 van de 4 pagina's
In winkelwagen1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid - ANSWER-b. Extreme pressure lubricant 2. The most common measurement of kinematic viscosity is what? a. Viscosity b. Centistok...
$10.89
In winkelwagen
Millwright Intermediate Trade Math Questions and Answers. (Graded A)
$10.99
Area of Triange - ANSWER-A=1/2bh Area of a circle - ANSWER-A=πr² Volume of a rectangular solid - ANSWER-V=lwh Volume of a cylinder - ANSWER-V=πr²h Volume of a sphere - ANSWER-V=4/3πr³ Volume of a pyramid - ANSWER-V=1/3Bh Volume of a cone - ANSWER-V=1/3πr²h Circumference ...
Bekijk voorbeeld
Voorbeeld 1 van de 2 pagina's
In winkelwagenArea of Triange - ANSWER-A=1/2bh Area of a circle - ANSWER-A=πr² Volume of a rectangular solid - ANSWER-V=lwh Volume of a cylinder - ANSWER-V=πr²h Volume of a sphere - ANSWER-V=4/3πr³ Volume of a pyramid - ANSWER-V=1/3Bh Volume of a cone - ANSWER-V=1/3πr²h Circumference ...
$10.99
In winkelwagen
Millwright Power Transmission Questions &Answers 100% Correct
$10.99
Advantage of using a chain coupling is that they A. Are easy to disconnect B. Are non-lubricating C. High vibration dampening capabilities D. All the above - ANSWER-A. Are easy to connect A coupling that could be used for high torque or power application is the A. Sleeve coupling B. Roll...
Bekijk voorbeeld
Voorbeeld 2 van de 7 pagina's
In winkelwagenAdvantage of using a chain coupling is that they A. Are easy to disconnect B. Are non-lubricating C. High vibration dampening capabilities D. All the above - ANSWER-A. Are easy to connect A coupling that could be used for high torque or power application is the A. Sleeve coupling B. Roll...
$10.99
In winkelwagen
Millwright Red Seal Study 1 Questions and Answers 100% Correct.
$10.99
Which of the following best describes a free flow control valve? A) It is the simplest form of directional control allowing flow in one direction only B) They are used to prevent a load suspended by a cylinder from free fall C) They operate actuators at different times D) They make a humming sou...
Bekijk voorbeeld
Voorbeeld 3 van de 20 pagina's
In winkelwagenWhich of the following best describes a free flow control valve? A) It is the simplest form of directional control allowing flow in one direction only B) They are used to prevent a load suspended by a cylinder from free fall C) They operate actuators at different times D) They make a humming sou...
$10.99
In winkelwagen
Alles Zien
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper IMORA. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor $21.79. Je zit daarna nergens aan vast.
Is Stuvia te vertrouwen?
4,6 sterren op Google & Trustpilot (+1000 reviews)
Afgelopen 30 dagen zijn er 67096 samenvattingen verkocht
Opgericht in 2010, al 14 jaar dé plek om samenvattingen te kopen