Package deal
Journeyman Bundled Exams Questions and Answers Latest Versions (2024/2025) (Complete and Accurate)
Journeyman Bundled Exams Questions and Answers Latest Versions (2024/2025) (Complete and Accurate)
[Show more]Journeyman Bundled Exams Questions and Answers Latest Versions (2024/2025) (Complete and Accurate)
[Show more]Journeyman Electrician Practice Exam #7 
 
Where the outer sheath of Type MI cable is made of steel _____________. 
 
A. it shall provide an adequate path to serve as an equipment grounding conductor 
 
B. a separate equipment grounding conductor shall be provided 
 
C. the grounding and grounded co...
Preview 2 out of 13 pages
Add to cartJourneyman Electrician Practice Exam #7 
 
Where the outer sheath of Type MI cable is made of steel _____________. 
 
A. it shall provide an adequate path to serve as an equipment grounding conductor 
 
B. a separate equipment grounding conductor shall be provided 
 
C. the grounding and grounded co...
Journeyman Electrician Exam 3 
 
Where a water pipe passes over an indoor motor control center, leak protection apparatus shall 
have a MINIMUM clearance of _____. 
 
a) 6 feet to the protection apparatus 
b) 6 feet to the water pipe 
c) 6 1⁄2 feet to the protection apparatus 
d) 6 1⁄2 feet to t...
Preview 2 out of 11 pages
Add to cartJourneyman Electrician Exam 3 
 
Where a water pipe passes over an indoor motor control center, leak protection apparatus shall 
have a MINIMUM clearance of _____. 
 
a) 6 feet to the protection apparatus 
b) 6 feet to the water pipe 
c) 6 1⁄2 feet to the protection apparatus 
d) 6 1⁄2 feet to t...
Journeyman Electrician Exam Prep 
 
What table sizes bonding jumpers for for AC systems? - 250.102(C)(1) 
 
The NEC defines continuous load to be a load where max current on the circuit continues for at 
least how many hours? - Three 
 
To use the adjustment factors in table 310.15(B)(3)(A), you mus...
Preview 2 out of 13 pages
Add to cartJourneyman Electrician Exam Prep 
 
What table sizes bonding jumpers for for AC systems? - 250.102(C)(1) 
 
The NEC defines continuous load to be a load where max current on the circuit continues for at 
least how many hours? - Three 
 
To use the adjustment factors in table 310.15(B)(3)(A), you mus...
Journeyman Electrician Practice Test 
 
Conductors with _____ marked on the insulation are NOT approved for use in a wet location. - 
THHN 
 
conductors with THHN insulation are approved for use in dry and damp locations only and 
conductors with THWN, THHW, and THW insulation are recognized for use...
Preview 2 out of 17 pages
Add to cartJourneyman Electrician Practice Test 
 
Conductors with _____ marked on the insulation are NOT approved for use in a wet location. - 
THHN 
 
conductors with THHN insulation are approved for use in dry and damp locations only and 
conductors with THWN, THHW, and THW insulation are recognized for use...
Journeyman Open Book Practice Exam 
 
#21 
 
where extensive metal in or on buildings or structures may become energized and is subject to 
personal contact _______ will provide additional safety. 
 
a) adequate bonding and grounding 
b) bonding 
c) suitable ground detectors 
d) none of these - a) a...
Preview 2 out of 9 pages
Add to cartJourneyman Open Book Practice Exam 
 
#21 
 
where extensive metal in or on buildings or structures may become energized and is subject to 
personal contact _______ will provide additional safety. 
 
a) adequate bonding and grounding 
b) bonding 
c) suitable ground detectors 
d) none of these - a) a...
NEC 2011 Journeyman Electrical Exam 
 
Study Guide (Michigan) 
 
Grounding and Bonding: 
 
Where outside, aluminum or copper-clad aluminum grounding electrode conductors shall not be 
terminated within ____in. of Earth. 
 
A. 12 in. 
B. 18 in. 
C. 24 in. 
D. 36 in. 
- B. 18 in. 
250.64(A) 
Temporary...
Preview 3 out of 23 pages
Add to cartNEC 2011 Journeyman Electrical Exam 
 
Study Guide (Michigan) 
 
Grounding and Bonding: 
 
Where outside, aluminum or copper-clad aluminum grounding electrode conductors shall not be 
terminated within ____in. of Earth. 
 
A. 12 in. 
B. 18 in. 
C. 24 in. 
D. 36 in. 
- B. 18 in. 
250.64(A) 
Temporary...
Electrical Journeyman Test Study Guide 
 
A fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. 
a. Light 
b. Medium 
c. Heavy 
d. Extra Heavy - c. Heavy 
 
From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in 
subsection (3), and i...
Preview 3 out of 26 pages
Add to cartElectrical Journeyman Test Study Guide 
 
A fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. 
a. Light 
b. Medium 
c. Heavy 
d. Extra Heavy - c. Heavy 
 
From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in 
subsection (3), and i...
Maine State Journeyman Exam up to 
 
15gph 
 
How many apprentices can a journeyman directly supervise? - 2 
 
When performing any service work on a customers heating system the licensee must notify the 
homeowner of? - Efficiency and code violations 
 
Can a licensed journeyman perform a cleaning o...
Preview 2 out of 13 pages
Add to cartMaine State Journeyman Exam up to 
 
15gph 
 
How many apprentices can a journeyman directly supervise? - 2 
 
When performing any service work on a customers heating system the licensee must notify the 
homeowner of? - Efficiency and code violations 
 
Can a licensed journeyman perform a cleaning o...
Journeyman Electrical Closed Book 
 
Exam #1 
 
An advantage of an electromagnet over a permanent magnet is that ____. - An electromagnet 
can be switched on and off. 
 
An excellent diffuser surface is one that ____. - Scatters light uniformly in all directions. 
 
Light is converted into electrici...
Preview 2 out of 6 pages
Add to cartJourneyman Electrical Closed Book 
 
Exam #1 
 
An advantage of an electromagnet over a permanent magnet is that ____. - An electromagnet 
can be switched on and off. 
 
An excellent diffuser surface is one that ____. - Scatters light uniformly in all directions. 
 
Light is converted into electrici...
Michigan Journeyman Test 
 
There are six conductors in a race way connected to 75° C rated circuit breaker. Each wire has a 
70 amp load using THHM conductors. The minimum size conductors used our 
#_________AWG - 4 
 
Thermal insulation shall not be installed within _________inches of recessed li...
Preview 2 out of 10 pages
Add to cartMichigan Journeyman Test 
 
There are six conductors in a race way connected to 75° C rated circuit breaker. Each wire has a 
70 amp load using THHM conductors. The minimum size conductors used our 
#_________AWG - 4 
 
Thermal insulation shall not be installed within _________inches of recessed li...
Florida Journeyman Electrician CB 
 
Exam 1 
 
An advantage of an electromagnet over a permanent magnet is that... - an electromagnet can 
be switched. 
 
An excellent diffuser surface is one that... - scatters light uniformly in all directions 
 
Light is converted into electricity... - in a photov...
Preview 2 out of 6 pages
Add to cartFlorida Journeyman Electrician CB 
 
Exam 1 
 
An advantage of an electromagnet over a permanent magnet is that... - an electromagnet can 
be switched. 
 
An excellent diffuser surface is one that... - scatters light uniformly in all directions 
 
Light is converted into electricity... - in a photov...
PSI Journeyman Online Practice Test 
 
A fitting is a part of a wiring system that is intended primarily to perform which type of 
function? - mechanical 
 
When the disconnecting means of a transformer is located remotely it must be? - lockable 
 
If installed and routed on the outside of a raceway...
Preview 2 out of 15 pages
Add to cartPSI Journeyman Online Practice Test 
 
A fitting is a part of a wiring system that is intended primarily to perform which type of 
function? - mechanical 
 
When the disconnecting means of a transformer is located remotely it must be? - lockable 
 
If installed and routed on the outside of a raceway...
Hvac Journeyman Exam 
 
Defects on gas piping or fittings shall be _____.(A) repaired(B) replaced or repaired and 
retested(C) repaired by a certified welder(D) ignored, as the operating pressure is much less than 
the air test. - B. Fitting shall be replaced or repaired and retested. UMC Section 13...
Preview 3 out of 19 pages
Add to cartHvac Journeyman Exam 
 
Defects on gas piping or fittings shall be _____.(A) repaired(B) replaced or repaired and 
retested(C) repaired by a certified welder(D) ignored, as the operating pressure is much less than 
the air test. - B. Fitting shall be replaced or repaired and retested. UMC Section 13...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller ExcellentScores. Stuvia facilitates payment to the seller.
No, you only buy this summary for $23.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
84866 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy summaries for 14 years now