Package deal for FANUC Certification Study with Questions and Accurate Answers

Fanuc 1 Exam with Questions and Answers axes 1, 2 and 3 are ANSWER major axes axes 4, 5, and 6 are ANSWER minor axes which mode limits all cartesian speed to less than 250 mm/ sec and joint speed to less than 10%? ANSWER T1 mode Enabling the iPendant gives motion control solely to whom? ...

FANUC Section 3 - HandlingPro Exam with Questions and Answers To run and view a program from beginning to end utilizing the EOAT pick and place a part A) right click on the program within the cell browser and select run program B) from the test-run menu, select run panel C) right click on the ...

FANUC Midterm Exam with Questions and Answers Assuming standard setup, if you jog the robot in World -Y, which direction will the TCP move? A. Straight out front B. Up C. To the robots right D. To the robots left ANSWER C Before forcing an input it must be... A. Simulated B. Named C...

Fanuc Certification Exam with Questions and Answers Turning the Teach Pendant On: ANSWER Gives motion control solely to the operator via the Teach Pendant What must be accomplished to avoid hard-stops and over-travels? ANSWER Set Axis Limits SHIFT and the hardkey COORD will display the foll...

FANUC Section 2 - Handling Tool Operations and Programming Exam with Q and A How many jog frames are standard on the R-J3 series controller? 2, 3, 4 or 5 ANSWER 5 Select all methods that a jog frame can be taught. [multiple answers] A) 2 point method B) 7 point method C) 3 point method D)...

FANUC Exam with Questions and Answers Enabling the iPendant gives motion solely to whom? A. The PLC B. The Controller C. The Operator ANSWER C Assuming standard setup, if you jog the robot in World -Y, which direction will the TCP move? A. Straight out front B. Up C. To the robots ri...

FANUC Final Quiz with Questions and Answers What comes first in safety when operating a robot ANSWER People What is second in safety ANSWER The robots What does DCS stand for? ANSWER Dual Check Safety What turns the robot on and off? ANSWER The breaker What is the box that gives the r...

FANUC Section 1-Robot Operations Exam with Questions and Answers When prioritizing the safety of your robotic system, the # 1 consideration should always be A) robot(s); B) workpiece; C) tooling; D) people; E) external devices ANSWER people The controller contains the computer that op...

Programming FANUC Robots for Industry Applications Test with Q and A With today's technology, _________are the primary actuating type for industrial. ANSWER Electric Motors Fanuc's Programming language is called? A. C B. Rapid C. KAREL D. Macro ANSWER C. KAREL A(n)______technicain...

Fanuc Robot Review Guide with Questions and Answers Name 4 basic components of a robot system. ANSWER mechanical unit, software, controller, peripheral equipment name the three spaces in the robot work envelope. ANSWER maximum, restricted, and operating how many joints does a Fanuc robot ha...

FANUC Certification Study with Questions and Accurate Answers T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor speed and position ANSWER True What is the correct way to recover from a DCS Joint Position Check alarm? ANSWER Press SHIFT + RESET an...