BICSI TDMM12 Chapter 4 questions with correct answers
2 views 0 purchase
Course
BICSI - RTPM
Institution
BICSI - RTPM
Work area components include: Correct Answer-Telecommunications outlet/connector, Work area cable (cord) MUTOA, WAP, NIC (4-1)
In modular jack connections, the acronym 8P8C stands for: Correct Answer-8-position, 8-contact (4-2)
Figure 4.1 - T568A vs. T568B Correct Answer-T568A - what color is...
BICSI TDMM12 Chapter 4 questions with correct answers
Work area components include: Correct Answer-Telecommunications outlet/connector, Work area cable (cord) MUTOA, WAP, NIC (4-1)
In modular jack connections, the acronym 8P8C stands for: Correct Answer-8-
position, 8-contact (4-2)
Figure 4.1 - T568A vs. T568B Correct Answer-T568A - what color is pin #1 - Green (4-3)
In a T568A pin/pair assignment, the white/brown; brown/white pair are: Correct Answer-Pair 4 (4-3)
The 2 pin/pair assignments that are the same in both the T568A and T568B pin/pair assignments are: Correct Answer-Pairs 1 and 4 (4-3)
Each location for a user in a work area must have a min. of _________ balanced twisted pair outlet box location. Correct Answer-one (4-4)
For work areas in which it may be difficult to install future additional telecommunications outlet/connectors, a minimum of _____ telecommunications outlet box locations should be provided Correct Answer-two (4-4)
*Outlet box size = Correct Answer-4" x 4" x 2 1/4" (4-4)
The WA telecom outlet box should be located near an electrical outlet within _______ and installed at the same height. Correct Answer-3' (4-5) Outlet to PP port is the link = Correct Answer-295' (4-7)
Add a patch cord, becomes a channel = Correct Answer-328' (4-7)
Allowed ______ of patch cords on each side. Correct Answer-16' (4-7)
The combined length of equipment cables, work area cords, and patch cords int eh TR or ER must not exceed ______. Correct Answer-33' (4-7)
When horizontal cabling must be adapted to accomodate specific user needs (e.g., balun), make the adaptations ________ the telecom outlet connector or MUTOA. Correct Answer-outside (4-7)
Work area cables are sometimes referred to as: Correct Answer-equipment cords, station cords (4-7)
If the work area cable transmission is less than that of the horizontal cabling to which it connects, the transmission performance of the entire channel will be _________ Correct Answer-reduced to that of the lesser performing work area component. (4-7)
Work area cables are sometimes referred to as Correct Answer-equipment cords or station cords (4-7)
Furniture and horizontal initial pathway capacity should not exceed _________ of the pathway cross section. Correct Answer-40% (4-9)
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller cracker. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.49. You're not tied to anything after your purchase.
