Hazmat Operations Test Questions And
100% Accurate Solutions.
Adsorption is the process of: - Answer Adhering the contaminant to a surface
A tank carrier designed to haul various chemicals whose pressures are less than 40 PSI would be a: -
Answer MC 306/DOT 406
The immediate concern when dealing with combustible liquid spills is to: - Answer Prevent ignition of
the fuel
The highest level of respiratory protection is needed but lesser chemical protection is required for the
skin best describes _______ protection. - Answer Level B
Chemical Transportation Emergency Center (CHEMTREC) is able to provide assistance to responders if: -
Answer The name of the shipper and manufacturer is known
Determining whether a vapor will rise or fall is commonly referred to as: - Answer Vapor Density
The maximum hose length allowed by NIOSH when using an airline hose respirator is ______ feet. -
Answer 300
If a product with a vapor density of 1.6 escaped from its container, you would expect the product to: -
Answer Collect in low-lying areas
Which resources are available for determining the concentrations of a released hazardous material in an
endangered area? - Answer Monitoring equipment should be utilized, keeping in mind that Haz-Mat
technicians are needed to operate this equipment.
Chemicals that ignite when combined create a(n) __________ reaction. - Answer Exothermic
, The eight-step process recommended for assessing a hazardous materials incident includes: - Answer
Hazard and Risk evaluation
What would be the likely result of allowing a contaminated individual to leave the hot zone without
being decontaminated? - Answer The contaminates would likely be transferred to other personal and
equipment resulting in secondary contamination.
When dealing with a Level III incident, it is expected that evacuation of people will cover an area of. -
Answer Large scale evacuation.
The minimum temperature to which a fuel in air must be heated to initiate self-sustained combustion
without initiation from an independent ignition source is best described as: - Answer Auto-ignition
Temperature
Which DOT Hazard Class covers nerve agents used in chemical warfare? - Answer DOT 6.1
At a hazardous materials incident, the assistant safety officer directly reports to the: - Answer Safety
Officer
Symptoms of heat ______ include little or no sweating; hot, dry, red skin, deep then shallow breathing;
and rapid pulse. - Answer Stroke
To protect against radiological exposures a responder should: - Answer Limit the time spent in a
radiation hazard area
A person who is repeatedly exposed to a chemical over a long period of time may develop - Answer
Chronic health hazard
The first step or most important thing to accomplish upon arrival at a hazardous materials or suspected
hazardous materials incident is: - Answer Isolation of the area and prevention of entry
100% Accurate Solutions.
Adsorption is the process of: - Answer Adhering the contaminant to a surface
A tank carrier designed to haul various chemicals whose pressures are less than 40 PSI would be a: -
Answer MC 306/DOT 406
The immediate concern when dealing with combustible liquid spills is to: - Answer Prevent ignition of
the fuel
The highest level of respiratory protection is needed but lesser chemical protection is required for the
skin best describes _______ protection. - Answer Level B
Chemical Transportation Emergency Center (CHEMTREC) is able to provide assistance to responders if: -
Answer The name of the shipper and manufacturer is known
Determining whether a vapor will rise or fall is commonly referred to as: - Answer Vapor Density
The maximum hose length allowed by NIOSH when using an airline hose respirator is ______ feet. -
Answer 300
If a product with a vapor density of 1.6 escaped from its container, you would expect the product to: -
Answer Collect in low-lying areas
Which resources are available for determining the concentrations of a released hazardous material in an
endangered area? - Answer Monitoring equipment should be utilized, keeping in mind that Haz-Mat
technicians are needed to operate this equipment.
Chemicals that ignite when combined create a(n) __________ reaction. - Answer Exothermic
, The eight-step process recommended for assessing a hazardous materials incident includes: - Answer
Hazard and Risk evaluation
What would be the likely result of allowing a contaminated individual to leave the hot zone without
being decontaminated? - Answer The contaminates would likely be transferred to other personal and
equipment resulting in secondary contamination.
When dealing with a Level III incident, it is expected that evacuation of people will cover an area of. -
Answer Large scale evacuation.
The minimum temperature to which a fuel in air must be heated to initiate self-sustained combustion
without initiation from an independent ignition source is best described as: - Answer Auto-ignition
Temperature
Which DOT Hazard Class covers nerve agents used in chemical warfare? - Answer DOT 6.1
At a hazardous materials incident, the assistant safety officer directly reports to the: - Answer Safety
Officer
Symptoms of heat ______ include little or no sweating; hot, dry, red skin, deep then shallow breathing;
and rapid pulse. - Answer Stroke
To protect against radiological exposures a responder should: - Answer Limit the time spent in a
radiation hazard area
A person who is repeatedly exposed to a chemical over a long period of time may develop - Answer
Chronic health hazard
The first step or most important thing to accomplish upon arrival at a hazardous materials or suspected
hazardous materials incident is: - Answer Isolation of the area and prevention of entry
