IMSA Work zone
On the shoulder adjacent to traffic being controlled - answerThe work zone starts at the
first advance warning sign; therefore, where should the flagger stand when directing
traffic in a TTC zone?
three - answerHow many orange and black TTC signs should there be in each direction
on a 2-way, 2-lane rural roadway?
500 ft. - answerWhat should the sign spacing be on a two-lane, two-way rural highway?
350 ft - answerHow many feet apart should the advanced warning signs be on a high
speed urban roadway?
on the left hand side of the highway - answerFor additional emphasis on a high speed
urban roadway, signs may be posted: _________
The distance required to safely route traffic from one lane to another - answerTaper
length refers to:
speed and width of lane closed - answertaper length is based on:
equal in feet to the speed limit - answerin a taper, the maximum distance between
channelizing devices should be:
traffic should pass to the left - answeron a barricade, if the stripes start at the upper right
side and angle down to the lower left side: ________
at least 28" tall and retroreflectorized with at least two white bands and two orange
bands - answerat night and/or on high speed roads greater than 45 mph, cones shall
be: __________
at the beginning of the taper - answerone a rural two-lane road, where would you place
the flagger in respect to the beginning of the taper for a closed lane?
1) Type of work to be done
2) traffic volume
3) traffic speed
4) school bus routes - answerWhat are some factors that should be considered in
formulating a TTC plan?
, diversion - answerthe rerouting of traffic onto a temporary bypass road is known as a:
__________
removed by grinding - answerpavement markings no longer needed should be:
routinely - answera TTC zone should be checked:
Standard Statement - answerin the MUTCD a mandatory condition is a:
a statement of a permissive condition - answerin the mutcd an option is:
temporary traffic control plan - answerA TTC plan is a:
typical application drawings - answerA TTC plan should include:
be trained and/or certified - answerThe MUTCD states that individuals responsible for
the implementation of TTC measures should:
1) traffic safety, movement, and guidance
2) TTC zone inspection
3) TTC zone maintenance - answerTTC principles and procedures should include:
during both day and night - answerwork zones should be inspected:
guidance statement - answera recommended practice in the MUTCD is a _______
option statement - answera permissive condition in the MUTCD is an ________
tort - answera _____ in legal terminology is *Civil Wrong* other than a beach of contract
for which a court will provide a remedy
legal obligation - answer*Liability* for a tort means the ____________ to pay monetary
damages to the person injured or damaged
1) the failure to do something that reasonable person would ordinarily do
2) the doing of something that an ordinary person would not ordinarily do
3) the failure to use ordinary care - answerNegligence can be defined as:
duty - answerthe obligation for a person to conform to a certain standard of conduct is
the definition of:
accepted standards and guidelines - answerthe MUTCD is an example of:
notice - answera red light is out. It is reported by the police to the traffic engineering
dept. This is an example of:
On the shoulder adjacent to traffic being controlled - answerThe work zone starts at the
first advance warning sign; therefore, where should the flagger stand when directing
traffic in a TTC zone?
three - answerHow many orange and black TTC signs should there be in each direction
on a 2-way, 2-lane rural roadway?
500 ft. - answerWhat should the sign spacing be on a two-lane, two-way rural highway?
350 ft - answerHow many feet apart should the advanced warning signs be on a high
speed urban roadway?
on the left hand side of the highway - answerFor additional emphasis on a high speed
urban roadway, signs may be posted: _________
The distance required to safely route traffic from one lane to another - answerTaper
length refers to:
speed and width of lane closed - answertaper length is based on:
equal in feet to the speed limit - answerin a taper, the maximum distance between
channelizing devices should be:
traffic should pass to the left - answeron a barricade, if the stripes start at the upper right
side and angle down to the lower left side: ________
at least 28" tall and retroreflectorized with at least two white bands and two orange
bands - answerat night and/or on high speed roads greater than 45 mph, cones shall
be: __________
at the beginning of the taper - answerone a rural two-lane road, where would you place
the flagger in respect to the beginning of the taper for a closed lane?
1) Type of work to be done
2) traffic volume
3) traffic speed
4) school bus routes - answerWhat are some factors that should be considered in
formulating a TTC plan?
, diversion - answerthe rerouting of traffic onto a temporary bypass road is known as a:
__________
removed by grinding - answerpavement markings no longer needed should be:
routinely - answera TTC zone should be checked:
Standard Statement - answerin the MUTCD a mandatory condition is a:
a statement of a permissive condition - answerin the mutcd an option is:
temporary traffic control plan - answerA TTC plan is a:
typical application drawings - answerA TTC plan should include:
be trained and/or certified - answerThe MUTCD states that individuals responsible for
the implementation of TTC measures should:
1) traffic safety, movement, and guidance
2) TTC zone inspection
3) TTC zone maintenance - answerTTC principles and procedures should include:
during both day and night - answerwork zones should be inspected:
guidance statement - answera recommended practice in the MUTCD is a _______
option statement - answera permissive condition in the MUTCD is an ________
tort - answera _____ in legal terminology is *Civil Wrong* other than a beach of contract
for which a court will provide a remedy
legal obligation - answer*Liability* for a tort means the ____________ to pay monetary
damages to the person injured or damaged
1) the failure to do something that reasonable person would ordinarily do
2) the doing of something that an ordinary person would not ordinarily do
3) the failure to use ordinary care - answerNegligence can be defined as:
duty - answerthe obligation for a person to conform to a certain standard of conduct is
the definition of:
accepted standards and guidelines - answerthe MUTCD is an example of:
notice - answera red light is out. It is reported by the police to the traffic engineering
dept. This is an example of:
