OSHA 500 STUDY SET COMPLETE AND CORRECT VERIFIED ANSWERS GRADED
A+
1.Which of the following list best describes OSHA's inspection priorities?
Imminent danger, fatality/catastrophe, complaints/referrals, programmed inspections
2.which of the following violations exists when an employer has demonstrated an intentional
disregard for the requirements of the OSH Act or a plain indifference to employee safety and
health?
Willful
3.By signing and dating the OSHA Outreach Training Program Report form, the trainer is:
Certifying that he/she has conducted this outreach training class in accordance with the OSHA
Outreach Training Program requirements and that the information on the form is true and correct
4.A typical OSHA inspection includes which of the following onsite activities?
presentation of inspector's credentials,opening conference, inspection walk around, closing
conference
5.The employer is responsible for insuring prompt medical attention in case of serious injury.
What is required if no medical facility or physician if reasonably accessible?
a person with a valid first-aid training on the worksite and a willingness to render first aid
6.Guardrail systems when used as fall protection must meet specific top rail height requirement
of 42 inches above the walking/working level. What is the additional flexibility allowed for the
top rail measurement with regard to the guardrail system criteria?
plus or minus 3 inches
7.The 10-hour Construction Industry Outreach Training Program contains mandatory topic
requirements which include "Introduction to OSHA", "Personal Protective and Lifesaving
Equipment"," " and "Health Hazards in Construction ."
Focus Four Hazards (Falls, Electrocution, Struck-by, and Caught-in or -between)
, 8.A conventional method of fall protection can include a personal fall arrest system and guardrail
system. Which of the following is also a conventional method of fall protection?
Safety net system
9.According to the arc welding and cutting standard, the electrode holder end of the cable must
be free from repair or splices for a minimum distance of at least from the end of the cable.
10 feet
10.Personal Protective Equipment is required for employees exposed to common hazards such as
splashing objects, harmful dusts, fumes, gases and mists. What additional protection is required
for exposure to rotating wheels, gears, shafts, and pulleys?
Guards
11.When developing effective electronic presentations using PowerPoint, you should use:
slides that are clear and concise, and with limited text
12.some effective training techniques for reviewing content include, using role plays, practice,
analogies, technology, as well as:
using hands-on activities, games, memory aids, and case studies
13.which of the following statements is true regarding respirator standard requirements that
apply when respirators with tight-fitting facepieces are required to be worn?
Fit testing is required
14.course learning objectives are:
specific statements defining measurable learner performance
15.During the required records retention period, which of the following documents must be
updated?
OSHA 300 log
A+
1.Which of the following list best describes OSHA's inspection priorities?
Imminent danger, fatality/catastrophe, complaints/referrals, programmed inspections
2.which of the following violations exists when an employer has demonstrated an intentional
disregard for the requirements of the OSH Act or a plain indifference to employee safety and
health?
Willful
3.By signing and dating the OSHA Outreach Training Program Report form, the trainer is:
Certifying that he/she has conducted this outreach training class in accordance with the OSHA
Outreach Training Program requirements and that the information on the form is true and correct
4.A typical OSHA inspection includes which of the following onsite activities?
presentation of inspector's credentials,opening conference, inspection walk around, closing
conference
5.The employer is responsible for insuring prompt medical attention in case of serious injury.
What is required if no medical facility or physician if reasonably accessible?
a person with a valid first-aid training on the worksite and a willingness to render first aid
6.Guardrail systems when used as fall protection must meet specific top rail height requirement
of 42 inches above the walking/working level. What is the additional flexibility allowed for the
top rail measurement with regard to the guardrail system criteria?
plus or minus 3 inches
7.The 10-hour Construction Industry Outreach Training Program contains mandatory topic
requirements which include "Introduction to OSHA", "Personal Protective and Lifesaving
Equipment"," " and "Health Hazards in Construction ."
Focus Four Hazards (Falls, Electrocution, Struck-by, and Caught-in or -between)
, 8.A conventional method of fall protection can include a personal fall arrest system and guardrail
system. Which of the following is also a conventional method of fall protection?
Safety net system
9.According to the arc welding and cutting standard, the electrode holder end of the cable must
be free from repair or splices for a minimum distance of at least from the end of the cable.
10 feet
10.Personal Protective Equipment is required for employees exposed to common hazards such as
splashing objects, harmful dusts, fumes, gases and mists. What additional protection is required
for exposure to rotating wheels, gears, shafts, and pulleys?
Guards
11.When developing effective electronic presentations using PowerPoint, you should use:
slides that are clear and concise, and with limited text
12.some effective training techniques for reviewing content include, using role plays, practice,
analogies, technology, as well as:
using hands-on activities, games, memory aids, and case studies
13.which of the following statements is true regarding respirator standard requirements that
apply when respirators with tight-fitting facepieces are required to be worn?
Fit testing is required
14.course learning objectives are:
specific statements defining measurable learner performance
15.During the required records retention period, which of the following documents must be
updated?
OSHA 300 log
