HVAC EPA 608 CERTIFICATION STUDY GUIDE EXAM|2023/24 UPDATE|GRADED A+

Are there drop-in replacements for R-12 systems? Why or why not? No because the new refrigerants are incompatible with the oils and lubricants used in R-12 systems. What type of oil is used in R-134a and what oils will it mix with? Ester based oils and they do not mix with other oils What type of lubricant is used with HCFCs? Alkylbenzene lubricant What is difference b/w ternary blend a azeotropic blend? Ternary blends are three-part mixtures whereas azeotropic blends are blends of two or more compounds that act like a single compound. What is the trait of a hygroscopic lubricant? It absorbs (takes on) moisture What is temperature glide and what type of blend won't have it? Temp. blend is the difference between the dew point and the bubble point Dew Point Occurs when saturation temp in evaporator causes refrigerant to change from liquid to vapor Bubble Point Occurs when saturation temp in condenser changes refrigerant from vapor to liquid Will the gases in a ternary blend leak at the same rate? Why or why not? No because different refrigerants in blend have different vapor pressures, causing them to leak at uneven rates Refrigeration Process transfer of heat from one place to another Evaporator Absorbs heat into system from space to be cooled. Absorption of heat causes refrigerant to boil. Upon leaving, refrigerant changed to low pressure, low temperature vapor Compressor Takes low pressure, low temp vapor and changes it to a high-temp, high-pressure, superheated vapor and delivers it to the condenser Condenser Rejects heat from system and changes refrigerant from high-temp, high-pressure vapor into high-pressure, high-temp liquid Metering Device reduces pressure of refrigerant and changes the high-pressure, high-temp liquid into low pressure, low temp liquid.