Bundle for NIMS measurement, materials, and safety tests compilation every thing you need | verified

A precise reference plane or surface used in precision measurement is called a: - Surface plate How would "Five Hundred Thousandths of an Inch" be written as a three place decimal? - .500 The amount of permissible variation on part size and shape is known as: - Tolerance What tool would be most...

The safest way to remove chips form a lathe or milling machine is to use a - Brush Small chips left on the spindle nose of the lathe should be cleaned to avoid - Run out on work piece Grease guns are used to insert grease into - Zerk fittings on machine tools To lubricate the ways of a lather, th...

Angle Plate - usually made of hardened steel or cast iron with working surfaces that form a 90 degree angle to each other comparison chart - measurement that compares the specification of a part feature to known standard sizes, as when using fixed gauges depth micrometer - a depth micrometer gau...

The safest way to remove chips from a lathe or milling machine is to use a: - brush Small chips left out on the spindle nose of a lathe should be cleaned to avoid - Run out on work holding devices Grease guns are used to insert grease into: - Zerk fittings on machine tools To lubricate the ways ...

All gage blocks need to include a certificate of traceability to the National Institute has f Standards and Technology (NIST) - True What are usually the best tools used to calibrate micrometers? - Gage blocks T/F Depth micrometers can measure the depths of slots and steps - True Depth micromet...

The safest way to remove chips from a lathe or milling machine - brush The most common injury from using a hand file - being stabbed by the tang( file without a handle) MSDS stands for - Material Safety Data Sheet Hazardous material labeling - A. NFPA- standing for national fire protection associ...