Package deal
FAA. Federal Aviation Administration|Tests Bundle Set
FAA. Federal Aviation Administration|Tests Bundle Set
[Show more]FAA. Federal Aviation Administration|Tests Bundle Set
[Show more]the average moment arm of the loaded airplane falls within its CG range. CORRECT ANSWER 1. When computing weight and balance, an airplane is considered to be in balance when 
 
Remove all items except those on the aircraft equipment list; drain fuel and fill hydraulic reservoir. CORRECT ANSWER 2. Wh...
Preview 4 out of 81 pages
Add to cartthe average moment arm of the loaded airplane falls within its CG range. CORRECT ANSWER 1. When computing weight and balance, an airplane is considered to be in balance when 
 
Remove all items except those on the aircraft equipment list; drain fuel and fill hydraulic reservoir. CORRECT ANSWER 2. Wh...
The working voltage of a capacitor in an ac circuit should be... CORRECT ANSWER at least 50 percent greater than the highest applied voltage. 
 
The term that describes the combined resistive forces in an ac circuit is... CORRECT ANSWER impedance. 
 
What is the opposition to the flow of AC produced...
Preview 2 out of 8 pages
Add to cartThe working voltage of a capacitor in an ac circuit should be... CORRECT ANSWER at least 50 percent greater than the highest applied voltage. 
 
The term that describes the combined resistive forces in an ac circuit is... CORRECT ANSWER impedance. 
 
What is the opposition to the flow of AC produced...
Which coupling nut should be selected for use with 1/2 inch aluminum oil lines which are to be assembled using flared tube ends and standard AN nuts, sleeves, and fittings? CORRECT ANSWER AN-818-8 
 
Metal tubing fluid lines are sized by wall thickness and... CORRECT ANSWER outside diameter in 1/16 ...
Preview 2 out of 5 pages
Add to cartWhich coupling nut should be selected for use with 1/2 inch aluminum oil lines which are to be assembled using flared tube ends and standard AN nuts, sleeves, and fittings? CORRECT ANSWER AN-818-8 
 
Metal tubing fluid lines are sized by wall thickness and... CORRECT ANSWER outside diameter in 1/16 ...
Magnetic particle inspection is used primarily to detect... CORRECT ANSWER flaws on or near the surface. 
 
Liquid penetrant inspection methods may be used on which of the following? CORRECT ANSWER ferrous metals, nonferrous metals, nonporous plastics. 
 
Which of these nondestructive testing method...
Preview 1 out of 4 pages
Add to cartMagnetic particle inspection is used primarily to detect... CORRECT ANSWER flaws on or near the surface. 
 
Liquid penetrant inspection methods may be used on which of the following? CORRECT ANSWER ferrous metals, nonferrous metals, nonporous plastics. 
 
Which of these nondestructive testing method...
FAA General Study: Physics questions with correct answers
Preview 1 out of 4 pages
Add to cartFAA General Study: Physics questions with correct answers
Zyglo or dye penetrant. CORRECT ANSWER What is the proper type of nondestructive inspection to use for locating surface cracks in an aluminum alloy casting or forging? 
 
Clean the part thoroughly and apply the penetrant and allow it to soak for the recommended time. Remove all of the penetrant from...
Preview 1 out of 4 pages
Add to cartZyglo or dye penetrant. CORRECT ANSWER What is the proper type of nondestructive inspection to use for locating surface cracks in an aluminum alloy casting or forging? 
 
Clean the part thoroughly and apply the penetrant and allow it to soak for the recommended time. Remove all of the penetrant from...
During starting of a turbine powerplant using compressed air starter, a hung start occurred. Select the proper procedure. CORRECT ANSWER Shut the engine down. 
 
A hung start ina jet engine is often caused by... CORRECT ANSWER the starter cutting off too soon. 
 
Which statement below reflects a typ...
Preview 2 out of 5 pages
Add to cartDuring starting of a turbine powerplant using compressed air starter, a hung start occurred. Select the proper procedure. CORRECT ANSWER Shut the engine down. 
 
A hung start ina jet engine is often caused by... CORRECT ANSWER the starter cutting off too soon. 
 
Which statement below reflects a typ...
number. CORRECT ANSWER The result is a smaller positive number, and is the same as ignoring the signs and subtracting the smaller number from the larger. 
 
General Ch. 1 
 
2. How do you convert a fraction into a decimal? CORRECT ANSWER Divide the top number (numerator) by the bottom number (denom...
Preview 4 out of 126 pages
Add to cartnumber. CORRECT ANSWER The result is a smaller positive number, and is the same as ignoring the signs and subtracting the smaller number from the larger. 
 
General Ch. 1 
 
2. How do you convert a fraction into a decimal? CORRECT ANSWER Divide the top number (numerator) by the bottom number (denom...
(Refer to figure 22, area 2; and figure 31.) At Coeur D'Alene , which frequency should be used as a Common Traffic Advisory Frequency (CTAF) to self-announce position and intentions? CORRECT ANSWER 122.8 MHz. 
 
To get a complete weather briefing for the planned flight, the pilot should request COR...
Preview 2 out of 13 pages
Add to cart(Refer to figure 22, area 2; and figure 31.) At Coeur D'Alene , which frequency should be used as a Common Traffic Advisory Frequency (CTAF) to self-announce position and intentions? CORRECT ANSWER 122.8 MHz. 
 
To get a complete weather briefing for the planned flight, the pilot should request COR...
With respect to the certification of AIRMEN, which is a CATEGORY of aircraft? CORRECT ANSWER Airplane, rotorcraft, glider, lighter-than-air 
 
With respect to the certification of AIRMEN, which is a CLASS of aircraft? CORRECT ANSWER Single-engine land and sea, multi-engine land and sea 
 
With respe...
Preview 2 out of 11 pages
Add to cartWith respect to the certification of AIRMEN, which is a CATEGORY of aircraft? CORRECT ANSWER Airplane, rotorcraft, glider, lighter-than-air 
 
With respect to the certification of AIRMEN, which is a CLASS of aircraft? CORRECT ANSWER Single-engine land and sea, multi-engine land and sea 
 
With respe...
What is one purpose of wing flaps? CORRECT ANSWER To enable the pilot to make steeper approaches to a landing without increasing the airspeed 
 
One of the main functions of flaps during approach and landing is to... CORRECT ANSWER Increase the angle of descent without increasing the airspeed 
 
Wha...
Preview 4 out of 124 pages
Add to cartWhat is one purpose of wing flaps? CORRECT ANSWER To enable the pilot to make steeper approaches to a landing without increasing the airspeed 
 
One of the main functions of flaps during approach and landing is to... CORRECT ANSWER Increase the angle of descent without increasing the airspeed 
 
Wha...
What is one purpose of wing flaps? CORRECT ANSWER To enable the pilot to make steeper approaches to a landing without increasing the airspeed. 
 
One of the main functions of flaps during approach and landing is to: CORRECT ANSWER Increase the angle of descent without increasing the airspeed. 
 
Wha...
Preview 4 out of 67 pages
Add to cartWhat is one purpose of wing flaps? CORRECT ANSWER To enable the pilot to make steeper approaches to a landing without increasing the airspeed. 
 
One of the main functions of flaps during approach and landing is to: CORRECT ANSWER Increase the angle of descent without increasing the airspeed. 
 
Wha...
When you are acting as PIC or a required crew member, what items must you carry on you? CORRECT ANSWER Pilot certificate and current medical certificate. 
 
If you are under 40, your medical certificate will expire in how long? CORRECT ANSWER 60 calendar months. 
 
If you are over 40, your medical c...
Preview 1 out of 4 pages
Add to cartWhen you are acting as PIC or a required crew member, what items must you carry on you? CORRECT ANSWER Pilot certificate and current medical certificate. 
 
If you are under 40, your medical certificate will expire in how long? CORRECT ANSWER 60 calendar months. 
 
If you are over 40, your medical c...
excessivly high engine temperatures will 
 
a) cause damage to geat conducting hoses warping of the cylinder cooling find 
 
b) cause loss of power,exsessive oil consumptuon, and possible permanent internal engine damage. 
 
c) not appreciably affect an aircraft engine CORRECT ANSWER A 
 
if the e...
Preview 4 out of 32 pages
Add to cartexcessivly high engine temperatures will 
 
a) cause damage to geat conducting hoses warping of the cylinder cooling find 
 
b) cause loss of power,exsessive oil consumptuon, and possible permanent internal engine damage. 
 
c) not appreciably affect an aircraft engine CORRECT ANSWER A 
 
if the e...
Required inspections CORRECT ANSWER Remember "A-AV1ATE" 
A - Annual inspection (12 calendar months) 
A - Airworthiness Directives (AD's) 
V - VOR (IFR only, 30 days) 
1 - 100 hour inspection if aircraft is used for hire or flight instruction 
A - Altimeter and static pressure systems (IFR only, 2...
Preview 3 out of 29 pages
Add to cartRequired inspections CORRECT ANSWER Remember "A-AV1ATE" 
A - Annual inspection (12 calendar months) 
A - Airworthiness Directives (AD's) 
V - VOR (IFR only, 30 days) 
1 - 100 hour inspection if aircraft is used for hire or flight instruction 
A - Altimeter and static pressure systems (IFR only, 2...
What is one purpose of wing flaps? CORRECT ANSWER To enable the pilot to make steeper approaches to a landing without increasing the airspeed. 
 
DISCUSSION: Extending the flaps increases the wing camber and the angle of attack of the wing. This increases wing lift and induced drag, which enables th...
Preview 2 out of 10 pages
Add to cartWhat is one purpose of wing flaps? CORRECT ANSWER To enable the pilot to make steeper approaches to a landing without increasing the airspeed. 
 
DISCUSSION: Extending the flaps increases the wing camber and the angle of attack of the wing. This increases wing lift and induced drag, which enables th...
What are the eligibility requirements for a private pilot certificate? CORRECT ANSWER a. Be at least 17 years of age. 
b. Be able to read, speak, write, and understand the English language. 
c. Hold at least a current Third Class medical certificate 
d. Received the required ground and flight traini...
Preview 3 out of 29 pages
Add to cartWhat are the eligibility requirements for a private pilot certificate? CORRECT ANSWER a. Be at least 17 years of age. 
b. Be able to read, speak, write, and understand the English language. 
c. Hold at least a current Third Class medical certificate 
d. Received the required ground and flight traini...
Who certifies and regulates pilots? CORRECT ANSWER Federal Aviation Administration 
 
The four forces acting on an airplane in flight are CORRECT ANSWER Lift 
Weight 
Thrust 
Drag 
 
Which statement relates to Bernoulli's principle? CORRECT ANSWER Air traveling faster over the curved upper surface ...
Preview 3 out of 19 pages
Add to cartWho certifies and regulates pilots? CORRECT ANSWER Federal Aviation Administration 
 
The four forces acting on an airplane in flight are CORRECT ANSWER Lift 
Weight 
Thrust 
Drag 
 
Which statement relates to Bernoulli's principle? CORRECT ANSWER Air traveling faster over the curved upper surface ...
Based on the criteria of efficiency of an engines weight to the power it produces, which type of engine is the best choice for an aircraft operating at speeds of 300mph at altitudes between 20,000-25,000 ft? CORRECT ANSWER Turboprop Engines 
 
An aircraft engine has 9 cylinders. From this informatio...
Preview 4 out of 55 pages
Add to cartBased on the criteria of efficiency of an engines weight to the power it produces, which type of engine is the best choice for an aircraft operating at speeds of 300mph at altitudes between 20,000-25,000 ft? CORRECT ANSWER Turboprop Engines 
 
An aircraft engine has 9 cylinders. From this informatio...
There is less rolling friction when ball bearings are used than when roller bearings are employed. CORRECT ANSWER 1. (8001) Which statement is true regarding bearings used in high-powered reciprocating aircraft engines? 
 
hydraulic lock. CORRECT ANSWER 2. (8002) A condition that can occur in radial...
Preview 4 out of 124 pages
Add to cartThere is less rolling friction when ball bearings are used than when roller bearings are employed. CORRECT ANSWER 1. (8001) Which statement is true regarding bearings used in high-powered reciprocating aircraft engines? 
 
hydraulic lock. CORRECT ANSWER 2. (8002) A condition that can occur in radial...
What are the different types of piston rings? CORRECT ANSWER Compression rings, oil control rings, and scraper rings. 
 
What type of piston rods are commonly found in radial engines? CORRECT ANSWER Master and articulating 
 
What types of bearings are generally found in reciprocating engines? CORRE...
Preview 3 out of 22 pages
Add to cartWhat are the different types of piston rings? CORRECT ANSWER Compression rings, oil control rings, and scraper rings. 
 
What type of piston rods are commonly found in radial engines? CORRECT ANSWER Master and articulating 
 
What types of bearings are generally found in reciprocating engines? CORRE...
Which government agency regulates policy regarding workplace safety in aviation facilities? CORRECT ANSWER OSHA 
 
What sound level becomes dangerous and requires the use of hearing protection? CORRECT ANSWER 100db 
 
A person should approach or leave a helicopter in the pilots field of vision whene...
Preview 4 out of 77 pages
Add to cartWhich government agency regulates policy regarding workplace safety in aviation facilities? CORRECT ANSWER OSHA 
 
What sound level becomes dangerous and requires the use of hearing protection? CORRECT ANSWER 100db 
 
A person should approach or leave a helicopter in the pilots field of vision whene...
What is the purpose of dynamic dampers on crankshafts? CORRECT ANSWER They reduce engine vibration. 
 
What types of bearings are generally found in reciprocating engines? CORRECT ANSWER Plain, ball and roller bearings. 
 
Are the connecting rods used in each cylinder of a radial engine the same? Ex...
Preview 4 out of 36 pages
Add to cartWhat is the purpose of dynamic dampers on crankshafts? CORRECT ANSWER They reduce engine vibration. 
 
What types of bearings are generally found in reciprocating engines? CORRECT ANSWER Plain, ball and roller bearings. 
 
Are the connecting rods used in each cylinder of a radial engine the same? Ex...
What is the most important law applicable to the study of electricity? CORRECT ANSWER Ohm's Law (I = E ÷R) 
 
What are the elements of Ohm's Law? CORRECT ANSWER Voltage (E), current (I), and resistance (R) 
 
What are the sources of electrical power? CORRECT ANSWER Mechanical (generator), chemica...
Preview 3 out of 22 pages
Add to cartWhat is the most important law applicable to the study of electricity? CORRECT ANSWER Ohm's Law (I = E ÷R) 
 
What are the elements of Ohm's Law? CORRECT ANSWER Voltage (E), current (I), and resistance (R) 
 
What are the sources of electrical power? CORRECT ANSWER Mechanical (generator), chemica...
The working voltage of a capacitor in an AC circuit should be CORRECT ANSWER at least 50 percent greater than the highest applied voltage 
 
The term that describes the combinded resistive forces in an AC circuit is CORRECT ANSWER impedance 
 
What is the opposition to the flow of AC produced by a m...
Preview 4 out of 88 pages
Add to cartThe working voltage of a capacitor in an AC circuit should be CORRECT ANSWER at least 50 percent greater than the highest applied voltage 
 
The term that describes the combinded resistive forces in an AC circuit is CORRECT ANSWER impedance 
 
What is the opposition to the flow of AC produced by a m...
Describe the result of adding a large positive number and a smaller negative number. CORRECT ANSWER The result is a smaller positive number, and is the same as ignoring the signs and subtracting the smaller number from the larger. 
 
How do you convert a fraction into a decimal? CORRECT ANSWER Divid...
Preview 4 out of 35 pages
Add to cartDescribe the result of adding a large positive number and a smaller negative number. CORRECT ANSWER The result is a smaller positive number, and is the same as ignoring the signs and subtracting the smaller number from the larger. 
 
How do you convert a fraction into a decimal? CORRECT ANSWER Divid...
Section IV - AMP 
RECIPROCATING ENGINES CORRECT ANSWER FAA-H-8083-32 AC43.13-1B 
References: Powerplant 
 
What is the purpose of a crankshaft dynamic dampers? CORRECT ANSWER To reduce engine vibration. 
 
What types of connecting rods are commonly found in radical engines? CORRECT ANSWER Master and...
Preview 4 out of 47 pages
Add to cartSection IV - AMP 
RECIPROCATING ENGINES CORRECT ANSWER FAA-H-8083-32 AC43.13-1B 
References: Powerplant 
 
What is the purpose of a crankshaft dynamic dampers? CORRECT ANSWER To reduce engine vibration. 
 
What types of connecting rods are commonly found in radical engines? CORRECT ANSWER Master and...
Where is the record of compliance with Airworthiness Directives or manufactures' service bulletins normally indicated? CORRECT ANSWER Aircraft maintenance records. 
 
If work performed on an aircraft has been done satisfactorily, the signature of an authorized person on the maintenance records for ...
Preview 2 out of 13 pages
Add to cartWhere is the record of compliance with Airworthiness Directives or manufactures' service bulletins normally indicated? CORRECT ANSWER Aircraft maintenance records. 
 
If work performed on an aircraft has been done satisfactorily, the signature of an authorized person on the maintenance records for ...
Ch.3 math 
 Addition of whole numbers is best accomplished by arranging them: 
 
A. From highest to lowest 
B. In columns 
C. From lowest to highest. CORRECT ANSWER B. In columns 
Ref: 8083 3-2 
 
Ch.3 
The result of multiplying whole numbers is called: 
 
A.product 
B.sum 
C.variant CORRECT ANSWE...
Preview 3 out of 16 pages
Add to cartCh.3 math 
 Addition of whole numbers is best accomplished by arranging them: 
 
A. From highest to lowest 
B. In columns 
C. From lowest to highest. CORRECT ANSWER B. In columns 
Ref: 8083 3-2 
 
Ch.3 
The result of multiplying whole numbers is called: 
 
A.product 
B.sum 
C.variant CORRECT ANSWE...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller cracker. Stuvia facilitates payment to the seller.
No, you only buy these notes for $40.99. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
64670 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 15 years now