100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Previously searched by you
Previously searched by you
logo
ABC Wastewater Level 3 - General Exam Questions Rated 100% Correct!! $7.99
Add to cart
Quickly navigate to
Preview
  2.  
  3. ABC Wastewater Level 3 - General
  4.  
  5. ABC Wastewater Level 3 - General

Exam (elaborations)

ABC Wastewater Level 3 - General Exam Questions Rated 100% Correct!!
 0 purchase
  • Course
  • ABC Wastewater Level 3 - General
  • Institution
  • ABC Wastewater Level 3 - General

Turbidity in wastewater is caused by A. color B. dissolved calcium C. hardness D. finely divided suspended material - Answer-D. finely divided suspended material The gas most commonly associated with septic wastewater is A. carbon dioxide B. carbon monoxide C. hydrogen sulfide D. methane -...

[Show more]

Preview 4 out of 54  pages

Document information

  • April 15, 2024
  • 54
  • 2023/2024
  • Exam (elaborations)
  • Questions & answers

Subjects

  • abc wastewater level 3 general

Written for

  • ABC Wastewater Level 3 - General
  • ABC Wastewater Level 3 - General

Seller

avatar-seller
ACADEMICMATERIALS

Reviews received

Content preview

ABC Wastewater Level 3 -General Turbidity in wastewater is caused by A. color B. dissolved calcium C. hardness D. finely divided suspended material - Answer -D. finely divided suspended material The gas most commonly associated with septic wastewater is A. carbon dioxide B. carbon monoxide C. hydrogen sulfide D. methane - Answer -C. hydrogen sulfide How many cubic meters per second in 10 MGD? A. 0.44 B. 1.44 C. 4.73 D. 24.62 - Answer -A. 0.44 Mechanical ventilation of a lift station is required to A. lower temperatures to reduce proportion of hydrogen sulfide B. reduce chlorine demand C. reduce corrosion D. increase DO in raw wastewater - Answer -C. reduce corrosion A wet well probe is usually used for ________ determination(s) of level. A. approximate B. dual point C. continuous D. single point - Answer -D. single point A pump is delivering at less than the expected rate of discharge. Which of the causes listed below is incorrect? A. speed of motor too low B. pump not primed C. impeller clogged D. discharge head too low - Answer -D. discharge head too low Metal pipes often fail because of A. back siphonage B. browning movement C. galvanic action D. reverse osmosis - Answer -C. galvanic action When a fire hydrant is operated, it should be A. just opened enough to have a flow B. opened fully C. opened halfway D. regulated to flow required - Answer -B. opened fully If the pump bearings on horizontal centrifugal pumps are over lubricated, the most important effect is that the extra lubricant A. will result in smoother and more efficient operation of the pump B. will not make any difference in the operation of the pump C. will be wasted D. shaft or shaft sleeve will be damaged - Answer -D. shaft or shaft sleeve will be damaged If packing is not maintained properly, A. cavitation damage will result B. impeller will corrode C. loss of suction due to air being allowed to enter pump D. shaft or shaft sleeve will be damaged - Answer -C. loss of suction due to air being allowed to enter pump Air flow through a trickling filter when the influent is warmer than the air temperature is A. upward through the filter B. downward through the filter C. inadequate and may require forced air ventilation D. improved by decreasing the recirculation - Answer -A. upward through the filter An active sludge in the aeration tank with an abundant available food supply will have a relatively A. high oxygen uptake and fast settling rate B. high oxygen uptake and slow settling rate C. low oxygen uptake and fast settling rate D. low oxygen uptake and slow settling rate - Answer -B. high oxygen uptake and slow settling rate The reaction of chlorine and ammonia produces a compound which is called A. ammonium chloride B. chloral hydrate C. chloramine D. hydrazine - Answer -C. chloramine A malfunctioning gas chlorination system has normal gas pressure, no feed rate indicated on rotometer, and no injector vacuum. What is the most likely cause of the problem? A. air leak upstream of rotameter B. gas line plugged C. injector clogged D. pressure reducing valve diaphragm ruptured - Answer -C. injector clogged What is the impact of increased viscosity on the effectiveness of mixed media filters? Mixed media filters are A. affected only if temperature also changes B. less effective C. more effective D. not affected - Answer -B. less effective The precipitate in coagulation with alum is aluminum A. bicarbonate B. carbonate C. hydroxide D. sulfate - Answer -C. hydroxide Given the following data, what is the most likely cause of the mechanically cleaned bar screen problem? DATA: Above normal water differential across bar screen Drive motor shaft turning Drive sprocket, chain, rake not moving Less than normal flow on bar screen downstream side Bar screen mode selector in automatic position Normal seasonal flow (influent) coming into bar screen Alarm systems operating normally A. low influent (incoming) level B. raw wastewater pumping units out of service C. sheared pin or disengaged clutch

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICMATERIALS. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $7.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

69052 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 15 years now

Start selling
$7.99
  • (0)
Add to cart
Added