Exam (elaborations)
NABCEP PV Installation Professional Exam Questions with Correct Answers
- Course
- Institution
NABCEP PV Installation Professional Exam Questions with Correct Answers
[Show more]
Content preview
NABCEP PV Installation Professional ExamQuestions with Correct Answers
NABCEP Correct Answer-North American Board of Certified Energy
Practioners
JTA Correct Answer-Job Task Analysis
The JTA outlines the expected duties of a qualified PV installation
professional.
Conduit Fill
(i.e. Maximum Percent of Conduit Area Available for Conductors)
Correct Answer-NEC Chapter 9 Table 1
Voltage Drop Limits Correct Answer-ASHRAE 90.1 Standards suggests
no more than 3% of nominal voltage.
NEC suggests no more than 5% in an "Informational Note".
Sunpower standard is no more than 1%.
Voltage Drop Equation Correct Answer-% drop =(0.2 x D x I x R )/V
Where:
D= one-way distance (in feet)
,I = current (nominal actual value, no 125% factors, use Imp for solar
circuits)
R = resistance of conductors (in ohms/1000ft)
V = voltage (typical, nominal, use Vmp for solar circuits)
Resistance values can be found in NEC Chapter 9 Table 8 "Conductor
Properties"
What size FMC conduit should be used for four size 6 AWG XHHW
conductors, one size 8 AWG XHHW EGC and four 10 AWG THHN
conductors? Only use the NEC code book to answer this question.
Correct Answer-1-1/4"
Use Chapter 9 Tables 4 and 5.
BIPV Correct Answer-Building-Integrated Photovoltaics
Can single phase inverters be connected to 3-phase power systems?
Correct Answer-Yes, as long as significant unbalanced voltages cannot
result
705.100
What is the minimum busbar rating for a subpanel used as an inverter ac
combiner panel to combine three 4000W, 240V single phase inverters?
Correct Answer-125A
, Rating of each breaker = 16.7 X 1.25 = 25A
Sum of inverter breakers = 3 x 25A = 75A
Minimum size of back-fed breaker in main service panel = 3 x 16.7A x
1.25 = 62.2 --> 70A
Minimum size busbars in subpanel x 1.2 = inverter breakers + utility
breaker = 75A + 70A
Minimum size busbars in subpanel = (75A + 70A)/1.2 = 121 --> 125A
705.12(D)(2)
Can an inverter output be connected to a subpanel instead of the main
distribution panel? Correct Answer-Yes, see 705.12(D).
But be careful that each panel in series meets the minimum busbar size
requirements.
Grounded conductor Correct Answer-A current carrying conductor that
is intentionally bonded to ground. It is the neutral conductor in any AC
system.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller cracker. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
73314 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
