NCCER CORE FINAL QUESTIONS AND ANSWERS 2024
Which of these is a true statement regarding safety? - ANS-Safety is a learned behavior and
attitude.
A measure of the probability, consequences, and exposure related to an event is referred to as _____. -
ANS-Risk
When placing a ladder against ...
NCCER CORE FINAL QUESTIONS AND ANSWERS 2024
Which of these is a true statement regarding safety? - ANS-✔✔Safety is a learned behavior and
attitude.
A measure of the probability, consequences, and exposure related to an event is referred to as _____. -
ANS-✔✔Risk
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where the ladder touches the platform or roof by at least _____. - ANS-✔✔3 feet
One of the most common grounding systems used for protection against accidental electrical shock is
the _____. - ANS-✔✔three-wire system
When there is the potential to be exposed to asbestos, workers must _____. - ANS-✔✔report it to a
supervisor and avoid disturbing it
What is the place value of 2 in the number 123,456? - ANS-✔✔ten thousands
Add the following numbers together: 811, 901, 88, and 5. The sum is _____. - ANS-✔✔1805
Your job as a carpenter pays $20/hour and you worked 40 hours last week. The taxes withheld from
your wages were $83 federal tax and $19 state tax. Your total check is _____. - ANS-✔✔$698
1/4 + 3/8 = _____. Reduce your answer to the lowest terms. - ANS-✔✔5/8
When converting decimals to a percentage, simply move the decimal point _____. - ANS-✔✔two places
to the right
, Another common name for lineman pliers is _____. - ANS-✔✔side cutters
When an object is plumb, it is _____. - ANS-✔✔perfectly vertical
Which of the following saws would likely have the fewest teeth per inch, resulting in the largest teeth? -
ANS-✔✔A ripsaw
The best designed saw for cutting miter joints is a _____. - ANS-✔✔backsaw
The safest kind of utility knife is one with a _____. - ANS-✔✔self-retracting blade
Before replacing parts such as bits, blades, or discs on any tool, you must _____. - ANS-✔✔disconnect
the power source
When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's
_____. - ANS-✔✔kerf
Before you plug any saw into a power source, make sure the _____. - ANS-✔✔power switch is in the off
position
A saw that has a thin, one-piece blade that runs around guides at either end of the saw is a __. - ANS-✔
✔bandsaw
Before using a pneumatically powered nailer for the first time, it is important to _____. - ANS-✔✔read
the manufacturer's instructions
Plans used for work that has to do with construction in or on the earth are called _____. - ANS-✔✔civil
plans
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Accurate. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
