A licensed irrigator must renew his/her every ______ years. - ANSWERthree
________, _________, and _________ are the goals of the TCEQ. - ANSWEREnforcement,
Water Quality,
Waste management
Licensed ______ are responsible for obtaining permits and inspections. - ANSWERirrigators
_____________...
A licensed irrigator must renew his/her every ______ years. - ANSWERthree
________, _________, and _________ are the goals of the TCEQ. - ANSWEREnforcement,
Water Quality,
Waste management
Licensed ______ are responsible for obtaining permits and inspections. - ANSWERirrigators
_______________ can install an irrigation system - ANSWERBoth
( Licensed Irrigator and Technician )
A TECHNICIAN can alter the irrigation design only when he/she ___________. - ANSWERreceives
approval from the licensed irrigator
The "Commission" refers to _______ - ANSWERTexas Commission on Environmental Quality (TCEQ)
The Texas Irrigator's Advisory Council is made up of __ members - ANSWERnine
The members of the Texas Irrigator's Advisory Council are appointed by _________. - ANSWERthe
Texas Commission on Environmental Quality (TCEQ)
The Texas Irrigator's Advisory Council must have ___ representatives of the public - ANSWERTHREE
A minimum depth of ____ inches of pipe coverage is needed - ANSWERNINE
______, _______, and ______ are functions of an irrigation system - ANSWERErosion control,
Dust reduction, Irrigation of vegetation
After a license has expired, the only way to obtain another is to __________. - ANSWERgo through
the re-examination process again.
Even if TCEQ fails to remind you that your license is about to expire, _______ - ANSWERyou will still
lose your licence if you fail to renew.
You must be licensed or work under the supervision of a licensed individual in order to install or
repair irrigation system for a living - ANSWERTRUE
In order to renew an irrigator license you must pay a renewal fee and complete at least 16 hours of
agency approved continuing education credits - ANSWERFALSE,
at least 24 hours
If continuing education credits are not completed before the license'd renewal date, the irrigator will
______ - ANSWERlose their license.
A complaint can be filed over the phone if accurate records are taken - ANSWERFALSE
, The "Rules and Regulations for licensed Irrigators" as presented but he TCEQ states that a design of
the proposed irrigation system must be provided to the home owner once the jib has been
completed. - ANSWERTRUE
On all installations of new irrigation systems, a licensed irrigator must present the customer a written
statement of guarantees for materials and labor furnished in the installation of the system -
ANSWERTRUE
According to the "Rules and Regulations for Licensed Irrigators" an irrigation system MUST be
designed and installed in a manner that promotes water conservation. - ANSWERTRUE
Absorption Rate is also known as ______. - ANSWERinfiltration rate
An atmospheric Vacuum breaker id commonly referred as an ______ - ANSWERanti-siphon
The larger the gauge number, - ANSWERSmaller the diameter of the wire
__________ ___________ is when all the heads discharge varying amounts of water, combining to
produce uniform coverage - ANSWERMatched Precipitation
Static Pressure - All pressure losses = - ANSWERDynamic Head Pressure
AWWA - ANSWERAmerican Water Works Association
A _______ is valve that permits water to flow in one direction only - ANSWERCHECK valve
A ______ is one complete operation of a controller through all programed stations - ANSWERCIRCUIT
______ pressure is the minimus pressure required for a system to operate properly - ANSWERDESIGN
__________ is a type of damage occurring when water travels unrestricted through empty lateral
lines - ANSWERDRY LINE SHOCKED AND APPALLED
An ________ is a device which allows water to flow out slowly in a drip irrigation system -
ANSWEREMITTER
Emitters use _____ to measure precipitation rate - ANSWERGAL PRE HOUR (GPH)
Spray heads use ___ to measure precipitation rate - ANSWERGAL PER MIN (GPM)
Pressure is lost as water moves through the piping is a result of _________ - ANSWERFRICTION
The design pressure should not exceed ________ of the static pressure - ANSWER90%
Sleeves should be at least ______ larger than the irrigation piping required - ANSWERtwo sizes
PVC pipe with the same physical dimensions as iron pipe. - ANSWERSCHEDULE PIPE
________ is the process of plant material giving off water vapor from their leaves -
ANSWERTRANSPIRATION
A shock wave of water created by a fast closing valve is called _______ - ANSWERWater Hammer
How do you denote the "Designation Code" for PVC pipe - ANSWERType# + Grade# + psi/100
([ex]
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller papersmaster01. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.99. You're not tied to anything after your purchase.
