- Study guides, Class notes & Summaries

ROPE RESCUE TECHNICIAN EXAM QUESTIONS AND ANSWERS EXAM | ACTUAL EXAM WITH A STUDY GUIDE AND PRACTICE EXAM | ACCURATE REAL EXAM QUESTIONS AND ANSWERS | GUARANTEED PASS | LATEST UPDATE In special operations incident command, the span of control may have to be narrowed due to: - CORRECT ANSWER the highly technical nature of the equipment and systems management. The webbing used for lashing a victim to a Stokes basket should be approximately _____ feet long. - CORRECT ANSWER 30 ...

ROPE RESCUE TECHNICIAN EXAM QUESTIONS AND ANSWERS EXAM | ACTUAL EXAM WITH A STUDY GUIDE AND PRACTICE EXAM | ACCURATE REAL EXAM QUESTIONS AND ANSWERS | GUARANTEED PASS | LATEST UPDATE The U-shaped section of rope with parallel sides is called? - CORRECT ANSWER Bight A line that runs from the higher of the two end anchor points and is connected to the laps is a? - CORRECT ANSWER Lowering Line What litter is lightweight and can be stored or carried in a compact backpack? - ...

Rope Rescue Exam Set Questions & Revised Correct Detailed Answers 1. What are the two different types of highlines - ANSWER Reeving Kootenay or 2. which type of highline has a main line that supports the load on pulleys or carabiners, and how do you lower the load - ANSWER Kootenay, by releasing tension on the main line 3. Which type of highline keeps tension on the main line at all times, and how do you lower the load - ANSWER Reeving, through secondary r...

Rope Rescue Tech Exam Set Questions & Revised Correct Detailed Answers 1. What can be used as edge protection? - ANSWER canvas edge protection Edge rollers, tarps, 2. What is the name of the metal wheel that the rope runs over in a pulley? - ANSWER Sheave 3. Which standard specifies the minimum job performance requirements for technical rescue personnel? - ANSWER NFPA 1006 4. How much strength is lost when a nylon rope is wet? - ANSWER 5. What ...

Rope Rescue| Rescue Technician Exam Set Questions & Revised Correct Detailed Answers 1. Any helmet used in high-angle work should also have a.... - ANSWER three-point suspension 2. Why does UIAA stand for? - ANSWER Associations 3. What does CEN stand for? - ANSWER Standardization 4. What is NFPA 1951? - ANSWER Union of International Alpine European Committee for Standard on Protective Ensembles for Technical Rescue Incidents 5. What is NFPA 19...

Rope Rescue Exam Set Questions & Revised Correct Detailed Answers 1. A class I harness: - ANSWER person Fits around the waist and thighs for one 2. A metal device that, through friction with the rope, creates a braking action or a controlled rappel is called a(n): - ANSWER device Descent control 3. A descent control device that allows for adjustable friction by sliding bars together is a: - ANSWER Brake bar rack 4. When operating a Munter hitch, the ___...

Rope Rescue Tech Exam Set Questions & Revised Correct Detailed Answers 1. Technical rescue managers know that teams work better than groups of individuals for five primary reasons: specialization, sense of being, coordination and management, __________, and networking concepts. A. emotional enrichment B. no repetition of actions C. increased survival profile D. economic feasibility - ANSWER B. no repetition of actions 2. What is the acronym used to determine how the ...

Tech Rescue Rope Exam Set Questions & Revised Correct Detailed Answers 1. What reflects the relationship between the strength of the weakest point in the system and the highest force expected to be applied? A. System load ratio B. Minimum breaking strength C. Component load ratio D. Elongation percent definitions - ANSWER System load ratio 2. Rescue 8s provide all of the following advantages over a conventional figure 8 descender EXCEPT: A. Rope is less likely to...

Rope Rescue Exam 1-2-3 Combined Exam Set Questions & Revised Correct Detailed Answers |ALREADY GRADED A+ PASS >> BRAND NEW VERSION!! 1. When life safety rope is purchased, __________ should assure that the product labels with the NFPA 1983, 2001 Edition information is attached and remains with the rope until placed in service. A. the manufacturer B. OSHA C. The authority having jurisdiction D. NFPA - ANSWER C. The authority having jurisdiction 2. In special ...