In a drum brake assembly Study guides, Class notes & Summaries

SOS brake & braking system Exam|100% Verified PASS!!! In a single anchor bendix drum type rear brake the secondary lining is longer than the primary Compared to the secondary shoe lining areas of drum brakes, the primary shoe lining area is: smaller and goes toward the front of the car During a brake overhaul, you notice that the brake fluid seems to be very dirty and dark in color. What should you do? flush the system before the new parts are installed In order to bleed the s...

A - Answer- The goal of burnishing the brakes after a complete brake service is to: A. Heat the brake assembly. B. Cool the brake assembly. C. Set the wheel bearings. D. Stretch the brake shoes to match the drum. A - Answer- Which of the following is true concerning master cylinder pushrod adjustment? A. There should be a slight gap between the pushrod and master cylinder piston. B. It should be adjusted until the piston is pushed in slightly. C. It should keep a slight pressure in th...

In hydraulic disc brakes, the pads are forced against the rotors by: the pistons As the pressure of fluid received by the wheel cylinder of a drum brake system increases, which of the following happens? The wheel cylinder cups and pistons are forced apart Which of the following safety devices delays application of front disc brakes in a disc/drum system until pressure is built up in the hydraulic system? a metering valve In a typical air-over-hydraulic brake system, -depr...

1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? A. leaking primary piston cup in master cylinder B. leaking powe...

On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad.. Correct answer metering valve The drive of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a spotlight. What could cause this problem? Correct answer leaking primary piston cup in master cylinder Which of the following would most likely happen if the measurements taken from t...

SOS Brake & Braking System Exam Questions And Answers 100% Verified In a single anchor bendix drum type rear brake - answerthe secondary lining is longer than the primary Compared to the secondary shoe lining areas of drum brakes, the primary shoe lining area is: - answersmaller and goes toward the front of the car During a brake overhaul, you notice that the brake fluid seems to be very dirty and dark in color. What should you do? - answerflush the system before the new parts are install...

Brake test questions and answers Graded A+ Both A & B are correct Technician A says that riveted disc brake pads are often quieter that bonded disc brake pads. Technician B says that integrally molded disc brake pads are molded into holes in the steel backing of the pads. Which technician is correct? Technician A only Neither A nor B are correct Both A & B are correct Technician B only A) Aid cooling Rotors are vented to: B) Increase strength D) Reduce the rotor weight C) Reduce...

Brakes Test 3 |Complete with A+ Graded Answers Both A & B are correct Technician A says that riveted disc brake pads are often quieter that bonded disc brake pads. Technician B says that integrally molded disc brake pads are molded into holes in the steel backing of the pads. Which technician is correct? Technician A only Neither A nor B are correct Both A & B are correct Technician B only A) Aid cooling Rotors are vented to: B) Increase strength D) Reduce the rotor weight C) Re...

Brake test questions and answers Graded A+ Disc brakes use replaceable friction material called? pads Drum brakes use replaceable friction material called? shoes Technician A says that a power-assisted brake system reduces stopping distance compared to nonpower-assisted brake system. Technician B says that the power-assisted brake system reduces the force that the driver must exert on the brake pedal. Which technician is correct? Technician B only Technician A says that all ve...

on a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad.. - correct answer metering valve the drive of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a spotlight. what could cause this problem? - correct answer leaking primary piston cup in master cylinder which of the following would most likely happen if the measurements taken f...