Rotary engine - Study guides, Class notes & Summaries

1. Proteins necessary for body's mainte- nance, growth, and repair (GS) 2. Carbohydrates and Fats used primarily for energy (GS) 3. 212 Water boils at degrees fahrenheit (GS) 4. 100 Water boils at degrees Cel- sius (GS) 5. 373 Water boils at Ks on the Kelvin scale (GS) 6. Veins carry blood from capillaries toward the heart. (GS) 7. Arteries carry blood away from the heart. (GS) 8. Ventricles lower chamber of the heart (GS) 9. Red Blood Cells component of blood which car- ri...

ABSA 4B TEST BANK | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ Which of the following pump designs has a spiral casing with an increasing cross sectional area? 1. rotary pump 2. rotary gear pump 3. rotary lobe pump 4. reciprocating pump 5. volute pump Correct Answer: 5. volute pump A clear line of sight to the flame is required by a(n): 1. Flame scanner 2. Thermopile 3. Flame rod 4. Thermocouple 5. All of the above Correct Answer: 1. Flame scanner 2 A ____ ...

The Wankel Rotary Engine was an engineering marvel that substantially reduced automobile exhaust emissions, but because it was less feul it was _______ in the early 1970's when _______ polution gave way to panic over fuel shortages a) needed....disillusionment with b) conceived....attention on c) modified.....opinion on d) abandoned.......preocupation with - Answer- Answer: D abandoned.......preoccupation with Despite generous helpings of_____ from a group of ______ critics, this ico...

ABSA 4B Exam Questions and Answers 100% Pass Which of the following pump designs has a spiral casing with an increasing cross sectional area? 1. rotary pump 2. rotary gear pump 3. rotary lobe pump 4. reciprocating pump 5. volute pump - Answer- 5. volute pump A clear line of sight to the flame is required by a(n): 1. Flame scanner 2. Thermopile 3. Flame rod 4. Thermocouple 5. All of the above - Answer- 1. Flame scanner A ____ is installed to start a large diesel engine. 1. electric...

Millwright level 4 INTERNAL COMBUSTION ENGINES Exam Questions With Verified Answers Before performing maintenance on a recently run engine, you must: A) Drain all oil from the crankcase B) Check and record the hour meter C) Disconnect all electrical, close, lock, tag and purge all gas sources D) Contact the manufacturer C) Disconnect all electrical, close, lock, tag and purge all gas sources The thermal efficiency of an engine is best described as: A) Draw in a full charge of air to ...

Engine Intake area correct answers 10ft in front of inlet (12ft with wind over 25kn) Double hearing protection should be worn when correct answers Within 100ft of an operating engine or p-3 APU. Engine inlet wind speed warning correct answers If the wind is over 25 knots, increase the inlet hazard by 20% (12ft) Exhaust heat/velocity is very high for long distances behind the engine, which can cause damage to equipment is a W/C or N? correct answers CAUTION Anti-Collision lights shal...

Engine Intake area Correct Answer 10ft in front of inlet (12ft with wind over 25kn) Double hearing protection should be worn when Correct Answer Within 100ft of an operating engine or p-3 APU. Engine inlet wind speed warning Correct Answer If the wind is over 25 knots, increase the inlet hazard by 20% (12ft) Exhaust heat/velocity is very high for long distances behind the engine, which can cause damage to equipment is a W/C or N? Correct Answer CAUTION Anti-Collision lights shall be...

in stabilizing a hot apparatus diesel engine's temperature, a cool down period of ______ is recommended before shutting down correct answers 3 to 5 minutes How often should the primer pump oil reservoir be checked? correct answers daily Before shutting down the apparatus engine temperature should be allowed to stabilize by idling it for___ minutes. correct answers 3 to 5 minutes proper apparatus maintenance includes visually checking the tank water level: correct answers daily The d...

What must be located outside a Class T machinery room? Select one: a. Spare flashlights b. Disposable coveralls c. Machinery shut off switch d. Light switches - Answer-c Degradation of heat transfer fluid of a hot oil system will begin to occur if: Select one: a. The oil filter is not serviced regularly b. The oil temperature is above a specified range, for an extended period of time c. The oil is allowed to churn in the circulating pump d. The oil becomes too viscous - Answer-b Dry ...

ABSA 4B Exam Questions and Answers 100% Pass Which of the following pump designs has a spiral casing with an increasing cross sectional area? 1. rotary pump 2. rotary gear pump 3. rotary lobe pump 4. reciprocating pump 5. volute pump - Answer- 5. volute pump A clear line of sight to the flame is required by a(n): 1. Flame scanner 2. Thermopile 3. Flame rod 4. Thermocouple 5. All of the above - Answer- 1. Flame scanner A ____ is installed to start a large diesel engine. 1. electric...