Hexagonal nut - Study guides, Class notes & Summaries

CSP Lesson 10 Exam Questions with Correct Answers What is the minimum rating required for a receptacle? - Answer-15 A A single receptacle connected to a 30-ampere branch circuit must generally have a rating not less than ------ amperes. - Answer-30 Amps If 15- and 20- ampere duplex receptacles are not marked with "CO/ALR" they are suitable for use with -------. - Answer-Copper and copper-clad aluminum conductors only. Duplex receptacles are required to be installed so that the equ...

Hand tools Exam Questions and Answers 100% Pass Another name for a machinist's hammer - Answer- ball-peen hammer A heavy-duty took used to drive posts or other large stakes - Answer- sledgehammer Proper angle for the edge of a cold chisel - Answer- 60 degrees A type of screw shown (square in a circle) - Answer- Robertson A screw that has a sharp point at the base of its drive socket - Answer- Reed and Prince How many sides on a hexagonal shape - Answer- Six In what way is a spud wrench d...

NCCER Hand Tools Questions And Answers 100% Verified ball-peen hammer - -another name for a machinist's hammer sledge hammer - -a heavy-duty tool used to drive posts or other large stakes 60 degree angle - - the proper angle for the edge of a cold chisel reed and prince - - A screw that comes to a relatively sharp point at the base of its drive socket six - - number of sides of a hexagonal shape smooth jaws - - How is a spud wrench different from a pipe wrench speed handl...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Another name for a machinist's hammer - answerball-peen hammer A heavy-duty took used to drive posts or other large stakes - answersledgehammer Proper angle for the edge of a cold chisel - answer60 degrees A type of screw shown (square in a circle) - answerRobertson A screw that has a sharp point at the base of its drive socket - answerReed and Prince How many sides on a hexagonal shape - answerSix In what...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Another name for a machinist's hammer - answerball-peen hammer A heavy-duty took used to drive posts or other large stakes - answersledgehammer Proper angle for the edge of a cold chisel - answer60 degrees A type of screw shown (square in a circle) - answerRobertson A screw that has a sharp point at the base of its drive socket - answerReed and Prince How many sides on a hexagonal shape - answerSix In what...

NCCER Hand Tools Exam 100% Passed Adjustable Wrench - Answer ️️ -A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Often referred to as a Crescent wrench due to brand recognition Ball-peen hammer - Answer ️️ -A hammer with a flat face that is used to strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal. Bevel - Answer ️️ -The inclination of a surface that intersects another surface at any angle less than 90...

Used mainly for woodworking, the ________ is set at a fixed, 90-degree angle. • Try Square 2. A(n) ________ is an L-shaped, hexagonal steel bar. • Hex-key wrench 3. The -------- has a flat face for striking and a rounded face for rounding off metal and rivets. • Ball-peen hammer 4. Shaped like an L, the -------- is used to make sure wall studs and sole plates are at right angles to each other. • Carpenter's square 5. A(n) -------- is a metal tool with a sharpened, beveled ...

NCCER Module 3 (Hand Tools) | Questions and Verified Solutions Latest Update what is another name for a machinist hammer? - Answer -Ball-peen hammer a heavy duty tool used to drive posts or other large stakes is called a? - Answer -Sledgehammer what is the proper angle for the edge of a cold chisel? - Answer -60- degrees what types of screw comes to a relative sharp point at the base of its drive socket? - Answer -Reed and Prince how many sides does a Hexagonal shape have? - Answer -six s...

NCCER Hand Tools Question and answers 100% correct 2023/2024ball-peen hammer - correct answer another name for a machinist's hammer sledge hammer - correct answer a heavy-duty tool used to drive posts or other large stakes 60 degree angle - correct answer the proper angle for the edge of a cold chisel reed and prince - correct answer A screw that comes to a relatively sharp point at the base of its drive socket six - correct answer number of sides of a hexagona...

NCCER Hand Tools Exam Questions with 100% Correct Answers Verified | Updated ball-peen hammer - answeranother name for a machinist's hammer sledge hammer - answera heavy-duty tool used to drive posts or other large stakes 60 degree angle - answerthe proper angle for the edge of a cold chisel reed and prince - answerA screw that comes to a relatively sharp point at the base of its drive socket six - answernumber of sides of a hexagonal shape smooth jaws - answerHow is a spud wrench diffe...