Steam pressure gauge - Study guides, Class notes & Summaries

_________ are necessary for complete combustion - ANSWER time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - ANSWER 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - ANSWER 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo-generator - ANSWER steam turbine a boiler is producing 40,000lb of s...

Boiler Operator Licensing Exam Questions and Answers Graded A+ all steam boilers must have 1 or more safety valves before anyone enters the boiler drum, the main steam stop valve, bottom blowdown valves, & feedwater valves should be Locked closed at atmospheric pressure, water begins to boil at approximately 212 degrees F fuels most commonly used in boilers Fuel oil, gas, & coal must be connected to the highest part of the steam side of the boiler Steam pressure gauge with an...

High pressure steam test Study Guide Boiler License Questions & Answers Verified 800 psi safety valve, at what pressure does it lift? - CORRECT ANSWER-824 3% Gauge reads 175psi 45' below where it is connected to the boiler, what is its true reading? - CORRECT ANSWER-155.5. 45 X 0.433 = 19.50psi 175 - 19.50 = 155.5 How often does a welder who works on pressure tanks need to be requalified? - CORRECT ANSWER-1 year What is the compression or crushing strength of a steel plate? - CORRECT...

3rd class stationary steam engineer license prep questions and answers rated A+ _________ are necessary for complete combustion time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ 214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi 12 an oil cooler is commonly used with a(n) ________ when operating in conjunction with a turbo- generat...

Ohio Boiler Test Questions and Answers Graded A+ The pressure at the base of a vertical foot of water is 0.433 psi. When performing a hydrostatic test, the pressure on the boiler should be increased to 1 1⁄2 times the safety valve setting . A boiler steam pressure gauge should have a range of 1 1⁄2 to 2 times the safety valve setting: The maximum size of the bottom blowdown line and the surface blowdown line is 2 1/2" During startup, the boiler vent should remain open unt...

MN Boiler License Exam Questions and Answers, Latest Updated 2024/2025 (GRADED) what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - answerc) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - answera) Necessary to burn the combustible gase...

Gases of Combustion that cool on Contact with the boiler heating Surface before combushion is completed Cause a(n) _________ correct answer: Formation of soot and smoke In the event of a flame failure, the programmer will______ correct answer: Secure the fuel, purge the firebox, and then shut down Boil the water must be conditioned to prevent ______ (3 Answers) correct answer: Formation of scale, oxygen pitting, carryover Rank refers to the __________ of the coal correct answer: Deg...

1/2" - ANSWER-Sight Glass Minimum Connection 3/4" - ANSWER-Low Water Cut-off Draw Minimum Connection 1" - ANSWER-Water Column Minimum Connection 3/4" - ANSWER-Control Manifold Minimum Connection 1/4" - ANSWER-Sight Glass Drain Minimum Connection 1" - ANSWER-Bottom Blow-Off Minimum Connection 2 1/2" - ANSWER-Bottom Blow-Off Maximum Connection 2 1/2" - ANSWER-Surface Blow-Down Maximum Connection 3" - ANSWER-Threaded Safety Valve Maximum Connection 4 1/2" - ANSW...

3rd Class Stationary Steam Engineer License Prep Exam 2024 Questions and Answers. _________ are necessary for complete combustion - Answer<>time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - Answer<>214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - Answer<>12 an oil cooler is commonly used with a(n) ________ when operatin...

MN Boiler License Exam Questions and Answers, Latest Update 2024/2025. what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - answerc) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - answera) Necessary to burn the combustible gases when p...