Yoke - Study guides, Class notes & Summaries

CWB 1 Exam (2024/2025) (Verified Answers). 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Correct answer-b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c)...

Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. - Answer-Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specification then back off a certain number of degrees. A customer says that the steering ...

CWEA Collection Systems Maintenance Grades 1 (2024 Update) Practice Questions and Verified Answers| 100% Correct| Grade A Q: The lack of an unpleasant odor in a manhole, loft station, or other structures does not always mean that dangerous gases aren't present because: Answer: Some dangerous gasses have no odor. Q: What should be considered when providing trench shoring? Answer: Depth of trench ( anything over 5' needs shoring) Q: Excavations & adjacent areas must ...

IFSTA Chapter 14 and 15 Exam Questions and Verified Answers| 100% Correct QUESTION If you are positioned to make fire attack, which condition would be important to communicate to your supervisor or the Incident Commander? (673) [4.3.10] Smoke that changes from gray to black All team members' PASS devices are functioning Amount of radiant heat felt by firefighters Presence of bystanders at the perimeter Answer: Smoke that changes from gray to black QUESTION Firefigh...

PADI Open Water Diver Final Exam (Latest 2023/ 2024 Update) Questions and Verified Answers with Rationales| 100% Correct| Grade A Q: The best place for me to position an alternate air source is A loose by my side so I can find it fast. B in the triangle area formed by my chin and the lower corners of my rib cage. C to the base of my cylinder. D to the back of my BCD between my shoulder blades and waist. Answer: B In the triangle area formed by my chin and the lower corners of my...

CWB 1 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - correct answer b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c) Slag inclusions. d) Cracking. e) B...

ASU: SCM 300 EXAM 3 Study Guide With Accurate Solutions. Which of the following are among the MOST important elements of the lean production philosophy? a. Quality inspections and a standardized product line b. Fully automated assembly lines and a large supplier base c. Large inventories and quality inspections d. Waste reduction and continuous improvement - answerWaste reduction and continuous improvement Which of the following is NOT one of the Seven Wastes? a. Excess inventory b. E...

Private Pilot Exam Questions With Correct Answers Latest (100% VERIFIED) Which function does the rudder provide? A. pitch B. yaw C. roll - Answer B. yaw What does pitching the nose up or down in fight primarily do? A. change the altitude B. change airspeed C. change the heading - Answer B. change the airspeed During your preflight you should take a sample of fuel from the plane (this plane is 100LL plane). Which color should the fuel be? A. Blue B. Green C. Red D. Clear - Answer A....

________ survey questions allow for quantitative analysis - Answer-closed ended Value stream maps help identify all of the following - Answer-sources of waste, bottlenecks, material & information flow, improvement opportunities The Fishbone diagram is part of the ________ phase of the Define, Measure, Analyze, Improve, and Control (DMAIC) cycle. - Answer-analyze When creating a control plan, you should consider which of the following items? - Answer-process maps, key inputs process, tar...

Water-Based Fire Suppression Systems, Fire Inspection and Code Enforcement Chapter 12 8th Edition Rated A+ What are used in their basic forms as the first line of defense against fires Automatic sprinkler systems NFPA 13 Standard for the Installation of Sprinkler Systems What's the percentage of all fires that were controlled or extinguished by sprinkler system 94% What provides the first line of defense of incipient fires Portable fire extinguishers A fire suppression system shoul...