Bilge - Study guides, Class notes & Summaries

45 RBM BECCES Question and answers rated A+ 2023/2024 CAPSIZING - correct answer 1 Verify current position, move RB-M into a safe area or position, evaluate situation and contact station/OPCON. 2 Engineer investigates the condition of the engine compartment using the CCTV system, and by accessing the engine compartment via the hatch. The engine compartment may be coated with water and oil, presenting a fire hazard. 3 Engineer investigates the condition of the auxiliary machinery compartme...

Bow front of a vessel Stern rear of a vessel Starboard right side of a vessel Port left side of a vessel Hull body of a vessel Propeller rotates and powers a boat forward or backward A capacity plate indicates the maximum _______ capacity and/or the maximum _______ ____ _______ that the boat can carry safely in _______ weather. weight; number of people; goodBefore beginning to fuel, turn off anything that might cause a ________ (engines, fans, or electrical equipment) Close all _______ ...

require on all wet exhaust system - correct answer an indicator of loss of exhaust cooling water is 1" - correct answer the lowest point of a self-bailing cockpit sole shall be how high above the full load water line to prevent bilge pump cycling - correct answer a check valve can be used in a bilge pump's discharge line length of discharge piping , number and radius of bends, and roughness of interior surfaces of piping of fittings - correct answer as installed with a given head pres...

Keel - A projecting strip along the bottom of the canoe, on the outside, to cut down slide slipping. Haystacks - Large standing waves which accompany deceleration of a current Ledge - The exposed edge of a rock stratum which acts as a natural low dam, or as a series of such dams. Lining - The use of ropes to work a boat down stream from the shore. Non-power face - The face of the paddle blade, opposite the power face Painter - A line attached to bow or stern of a...

Bow front of a vessel Stern rear of a vessel Starboard right side of a vessel Port left side of a vessel Hull body of a vessel gunwale upper edge of vessel's side cleat metal fitting on which a rope can be fastened propeller rotates and powers a boat forward beam maximum width of a vessel freeboard the distance from the water to the lowest point on the vessel where water could come onboard draft depth of water need...

The safety of life at sea convention was developed by the: - Answer- International Maritime Organization SOLAS requires a lifesaving training manual be provided in each crew cabin or in the: - Answer- recreation and messrooms The most important reason for taking anti-seasickness pills as soon as possible after entering a liferaft is to - Answer- prevent loss of body moisture by vomiting One of the first actions to be taken by survivors when they have boarded an inflatable is to - Answer...

Keel : A projecting strip along the bottom of the canoe, on the outside, to cut down slide slipping. Haystacks : Large standing waves which accompany deceleration of a current Ledge : The exposed edge of a rock stratum which acts as a natural low dam, or as a series of such dams. Lining : The use of ropes to work a boat down stream from the shore. Non-power face : The face of the paddle blade, opposite the power face Painter : A line attached to bow or stern of a boat 2 | P a g e...

ABYC Marine Electrical Certification Exam Review Questions and Answers Every 18 inches. How often (in inches) shall wire bundles be supported? Insulated Metallic Hanger Clamps What type of clamps are to be used for supporting wire bundles when routed over engines and machinery? 40 lbs (E-11 Table XV) What tensile force must a 10 Gauge crimp connector withstand for one minute? 36 inches What is the max allowed unsupported cable length for battery cables? True T o...

Hull - Answer-The main body of the ship. Keel - Answer-The spine of the ship. Runs from bow to stern. Stem - Answer-Forward end of the keel extending up the bow. Stern post - Answer-Aft end of the keel extending up the stern Frames - Answer-Ribs of the ship and fastened to the keel. Numbered starting at the bow. Longitudinal Frame - Answer-Runs bow to the stern parallel to the keel Plating - Answer-The skin of the ship (Outer, Deck, Inner Bottom). Bilge - Answer-Lowest point on the ship a...

ABYC Systems Certification Exam - Questions and Answers Which of the following is a typical working pressure of LP gas (after the pressure regulator)? a. 0.4 PSI b. 14 PSI c. 24 PSI d. 300 PSI According to ABYC, all of the following considerations need to be given to evaporator condensate drains, EXCEPT: A. contain a P-trap to prevent ingress of CO B. the diameter of the drain C. drains overboard or into a bilge area other than shared by an engine D. orient the containment pan to facilitate co...